Easy Setting Guide
Home Theater Audio System
Model No.
SC-ZT1
RQCA1931 H0409FS0
If [WIRELESS LINK] indicator does not light up in step (1), check the connection of AC mains lead of speaker.
If [WIRELESS LINK] indicator does not light green, see page 29 of Operating Instructions.
If the speakers are set wrong in step (3), turn the main unit off then on again and perform steps (2) and (3).
There is no positional distinction for each speaker before setting.
CH
GAME
MUTE
Press and hold until
“2 SPKR SET ” is
displayed.
(approx. 3 seconds)
Sound is output from either of the speakers.
When “COMPLETE ” display disappears, the
speaker setting is complete.
Press
The colour of
[WIRELESS LINK]
indicator changes from
red to green.
CHECK
(1) Turn on the main unit and 2 speakers.
When “2CH SEARCH ”
on the main unit goes off,
go to step (2).
(If the sound moves, press another button.)
Main unit
•
Connect AC mains lead (included) after all
other cables and cords are connected.
1
Setup of speakers
3
Speaker setting
To connect a recorder, refer to page 10 of Operating Instructions.
TV
Digital audio
out (optical)
HDMI
input
(Not
included)
Connect
AC mains
lead to 2
speakers.
Aim the remote
control at the
main unit.
Press
(2) Check the
confirmation
sound.
Press
(3) Determine speaker positions.
Speaker
TV
Example
Speaker
Main unit
2
Connection
Speaker
Main unit [Rear view]
DIGITAL IN
TV
OPTICAL 1
HDMI
TV
OUT
AC IN
“2CH SEARCH ”
WIRELESS LINK
“2 SPKR SET ”
“COMPLETE ”
AC IN
Household mains socket
For E, GN
(AC 220 to 240 V, 50 Hz)
For GS (AC 110 to 240 V, 50/60 Hz)
Household mains socket
For E, GN
(AC 220 to 240 V, 50 Hz)
For GS
(AC 110
to 240 V,
50/60 Hz)
AC IN
GAME
MUTE
Press the button of the
speaker outputting sound.
Power sources differ depending on
the symbols (E, GN, GS) indicated
on the packaging box.
/