Note:
“EB” on the packaging indicates the United
Kingdom.
Before connecting, operating or adjusting this
product, please read these instructions completely.
Please keep this manual for future reference.
EB
Amplifier/Speaker System
Operating Instructions
Model No.
SC-HDX2
RQT5615-B
H0800DD0
Matsushita Electric Industrial Co., Ltd.
Osaka 542-8588, Japan
En
2
Dear Customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
Supplied accessories
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses when asking for
replacement parts.
Stereo amplifier
Speakers
SE-HDX2
SB-HDX2
×2
Placement
Set the system up on an even surface away from direct sunlight,
high temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid distortion
and unwanted acoustical effects.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock.
Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is
not covered in these instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorized service center.
Electric shock or damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION TO PREVENT RISK OF
ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING.
Safety precautions
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE
TO RAIN, SPLASHING, DRIPPING OR MOISTURE.
SE-HDX2
SB-HDX2
AC mains lead
(RJA0053-2X)..........................1
Stereo phono cable
(RJL2P005X10) ......................1
Attachment (A, B)
A: RGQ0282-S
B: RGQ0283-S
............2 sets
Screws (XTW3 + 10CFN) ......4
( )
Caution
¡¡
Use the speakers only with the
recommended system. Failure to do so
may lead to damage to the amplifier and/or
the speakers, and may result in the risk of
fire. Consult a qualified service person if
damage has occurred or if you experience
a sudden change in performance.
¡¡
Do not attach these speakers to walls or
ceilings.
A B
The included AC mains lead is for use with this unit
only. Do not use it with other equipment.
Note
3
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is approved
by ASTA or BSI to BS 1362.
Check for the ASTA mark or the BSI mark on the body of
the fuse.
If the plug contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF
THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE
SOCKET.
If a new plug is to be fitted please observe the wiring code as stated
below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH
TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE
EARTH SYMBOL OR COLOURED GREEN OR
GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF-KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and follow
the instructions below. Illustrations may differ from actual AC mains
plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
2. Replace the fuse and close or attach the fuse cover.
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
Caution for AC Mains Lead
4
L
R
SUBWOOFER
OUT
LINE IN
L
R
Household
mains socket
(AC 230-240 V,
50 Hz)
Connection
This unit can be connected to portable equipment such
as DVD, CD, and MD players.
Turn off all units before making connections.
Confirm the colours of the cords to ensure correct connection.
Incorrect connection can damage the unit.
Note
DVD-LV75 etc.
(not included)
Facing down
Use this set up if you place the speaker up on a shelf.
Facing up
You can enjoy clearer sound by facing the speaker
directly toward you when it is on a desk.
This is an example of how to set up a speaker so it is facing up.
¡ Do not remove screws except for those specified here.
1 Detach
the stand.
2 Attach
attachment A.
Use the screws from step 1.
3 Attach
the stand.
4 Line up the holes
and attach
attachment B.
AC mains lead
(included)
Connect this cord only after
all other cables and cords
are connected.
Active subwoofer
(not included)
AUDIO
OUT
Stereo phono cable
(included)
Fit the protrusions
through the holes
Screws
(included)
To face down
Cloth
Setting up the speakers so they face up or down
Speaker (left) Speaker (right)
Monaural
phono cable
(not included)
Before connection:
To prepare the speaker
cables, twist the vinyl
tip and pull off.
Connecting the cables
1 2
NO
White (L)
Red (R)
Use the included attachment to change the angle of the speakers.
Plug type:
3.5 mm
⁄
+
Gray
⁄
–
Gray (with
blue line)
Blue
Gray
INPUT
READ THE CAUTION
FOR THE AC MAINS
LEAD ON PAGE 3
BEFORE CONNECTION.
Connector
Approx. 6 mm
Appliance inlet
Insertion of connector:
Even when the connector is perfectly
inserted, depending on the type of inlet
used, the front part of the connector
may jut out as shown in the drawing.
However there is no problem using the
unit.
5
Operation
Standby/on switch ( I)
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
Operation indicator
The indicator lights red. Four seconds later it turns green to indicate
that operation is possible.
If you have connected a subwoofer, adjust the subwoofer’s volume
to suit the included speakers, then adjust the volume on this unit.
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak detergent solution.
¡ Never use alcohol, paint thinner or benzine to clean this unit.
¡ Before using chemically treated cloth, read the instructions that came with the cloth carefully.
Maintenance
VOLUME
VOLUME
3 Start play on
the other unit.
4 Adjust the volume.1 Turn [VOLUME] to
“MIN”.
MAXMIN
MAXMIN
Operation
indicator
I
2 Press [ I] to turn
on the unit.
If irregular colouring occurs on your television
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
6
Troubleshooting guide
¡ Ensure the mains lead is connected.
¡ Check speaker connections.
No power.
Sounds are unfixed or left and
right are reversed.
¡ A mains lead or fluorescent light is near the cables. Keep other appliances
and cords away from this unit’s cables.
Humming heard during play.
¡ The speaker cords may have shorted. Turn the unit off and reconnect the
cords.
Sound stops suddenly during
play.
¡ This may occur if the CD player is on while you are connecting it. Turn the
player off before connection.
Unexpected operations occur
when connecting a portable CD
player.
¡ Position the amplifier away from the television.
There is interference on the
television.
4
4
4
—
¡ Turn the volume up.
¡ Check speaker connections.
No sound.
5
4
—
4
Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or
a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of
Authorized Service Centers (enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions.
■ AMPLIFIER SECTION (Low Frequency Side)
Power Output
DIN 1 kHz, THD 1 %, 6 Ω, both channel driven 2 x 7 W
RMS 1 kHz, THD 10 %, 6 Ω, both channel driven 2 x 12 W
Total Harmonic Distortion
Half Power, 1 kHz, 6 Ω 0.3 %
Frequency Response 60–100000 Hz (+1 dB, –6 dB)
S/N 100 dB
(IHF A, Rated Power, S=2 V)
Load Impedance 6 Ω
■ GENERAL
Power supply AC 230 – 240 V, 50 Hz
Power consumption 28 W
Dimensions (W x H x D) 95 x 179.5 x 265.5 mm
Mass 3.1 kg
Power consumption in standby mode: 0.7 W
■ SPEAKER SECTION
Type 1 way 1 speaker Bass-reflex
Speaker unit
Full range 8 cm cone type
Impedance 6 Ω
Input power
MUSIC 30 W
DIN 15 W
Sound pressure level 80 dB/W (1.0 m)
Frequency range 80 Hz–30 kHz (–16 dB)
105 Hz–25 kHz (–10 dB)
Dimensions (W x H x D) 104 x 179 x 115 mm
Mass 0.95 kg
Note:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Specifications
-
1
-
2
-
3
-
4
-
5
-
6
Panasonic SCHDX2 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic TH42PA50EY Owner's manual
-
-
-
-
-
-
-
-
-