SECO-LARM USA Home Security System SD-7202GC-PE User manual

Brand
SECO-LARM USA
Model
Home Security System SD-7202GC-PE
Type
User manual

This manual is also suitable for

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Email: [email protected] Website: www.seco-larm.com
16842 Millikan Avenue, Irvine, CA 92606
SD-7202GC-PE.cdr
®
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Copyright 2008 SECO-LARM U.S.A., Inc. All rights reserved.
Stainless-steel, single-gang message plate.
Large (2” square), illuminated, momentary
push button.
"PUSH TO EXIT” message can be replaced
with “PRESIONE PARA SALIR” message.
N.O./N.C. contacts rated 10 Amps.
SD-7202GC-PE Green, 2" square, push-button
Typical Applications
SD-8202GTPEQ
SK-910R
RF Receiver
E-941SA-1200
Electromagnetic Lock
PUSH
TO
EXIT
®
LED
Indicator
SD-7202GC-PE
Push-To-Exit Plate
SD-7202GC-PE
Connection
Diagram:
(Actual size shown)
Features:
O
O
O
“
O
Included:
O
“PUSH TO EXIT” and “PRESIONE PARA SALIR” message plates.
O
attach spade lugs for fast installation.
O
Stainless-steel single-gang plate.
O
Replacement bulb (12V, 1.2W, 15,000-hour life).
O
Resistor (150 ohm, 1 Watt).
ENFORCER
ACCESS
Tel: 1-800-662-0800 (Domestic U.S. & Canada) Tel: 1-949-261-2999 (California & international)
Fax:1-949-261-7326 Email: [email protected] Website: www.seco-larm.com
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
SD7202GCPE_0802Green.p65
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
“PRESIONE PARA SALIR”
message plate also included
Copyright © 2002 SECO-LARM, U.S.A., Inc.
2.125”
(54mm)
4.5” (114mm)
Dimensions:
White (COM)
10A @ 125~250VAC
Blue/White (for N.O.)
Green/White (for N.C.)
Green (light bulb) 12V or
24V (requires resistor)*
Green (light bulb) 12V or
24V (requires resistor)*
*Note: Use 150 ohm, 1 watt resistor on either one of
Green wires for 24 volt bulb operation.
2.75” (70mm)
2” (51mm)
®
2” (51mm)
“PUSH TO EXIT” and “PRESIONE PARA
SALIR” message plates.
Five color-coded, 12-inch, AWG 18 wire
leads with easy-to-attach spade lugs for
fast installation.
Stainless-steel single-gang plate.
Replacement bulb
(12V, 1.2W, 15,000-hour life).
Resistor (150 ohm, 1 Watt).
Included:
  • Page 1 1

SECO-LARM USA Home Security System SD-7202GC-PE User manual

Brand
SECO-LARM USA
Model
Home Security System SD-7202GC-PE
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents