Viking 1130908 Installation guide

Brand: Viking

Model: 1130908

Type: Installation guide

Installation Guide

Dishwasher Door Panel Kits

PDDP242 / RVDP324/TVDDP24

2

Door Panel Installation

For FDW300/FDW300WS/FDW100/FDW100WS/FDW101 and

FDW101W Models (Purchased Separately)

C

D

C

D

The unit comes with everything needed to make installing the door panel easy.

What you will need:

Phillips Head #8 1-3/4” long, Stainless Steel

Screwdriver Phillips Head Screw

(4 supplied)

Dishwasher Door

Plastic

Retainers

Door Panel

3

Installation

1

Plastic

Retainers

2

3

x2

D

D

D

C

C

4

x4

D

D

Remove plastic retainers from door panel

and discard.

Remove plastic mounting brackets from

the dishwasher and discard.

Carefully open the dishwasher door.

Remove the (2) white caps from holes (C)

and the (2) top screws from holes (D) on

dishwasher door.

Carefully secure the door panel to the

dishwasher through holes (D) using the four

 at PHD screws provided. Carefully tighten

all four screws and check to ensure that the

panel is square with the dishwasher door.

Do not over tighten screws. This may

cause damage to the inner door.

Note: Verify the operation of the door counterbalance springs after installation of the door skin.

Note: Verify that the door does not hit the kickplate. Adjust kickplate if necessary.

4

Door Panel Installation

For FDB451 Models (Purchased Separately)

The unit comes with everything needed to make installing the door panel easy.

What you will need:

Torx Driver #8 1-3/4” long, Stainless Steel

Truss Head Screw

(4 supplied)

C

D

D

C

D

D

Dishwasher Door

Plastic

Retainers

Door Panel

5

Installation

1

C

Plastic

Retainers

2

x4

D

D

D

3

x4

D

D

Position door panel on front of dishwasher

door. Snap the plastic retainers on the door

panel into the holes (C) on dishwasher door.

While holding the door panel in position,

carefully open the dishwasher door.

Using the four truss head screws provided,

secure the door panel to the four holes (D)

on the dishwasher door

Carefully tighten all four screws and check

to ensure that the panel is square with the

dishwasher door.

WARNING

The door skin must not obstruct the

fan exhaust vent.

Note: Verify the operation of the door counterbalance springs after installation of the door panel

6

7

Viking Range, LLC

111 Front Street

Greenwood, Mississippi 38930 USA

(662) 455-1200

For product information,

call 1-888-845-4641

or visit the our web site at vikingrange.com in the US

or brigade.ca in Canada

F21018D (051515)

1
2
3
4
5
6
7
8

Viking 1130908 Installation guide

Brand: Viking

Model: 1130908

Type: Installation guide

Download PDF

Related papers

Other documents