Panasonic DMCFZ300SG Operating instructions

Brand: Panasonic

Model: DMCFZ300SG

Type: Operating instructions

SQT1120

M0915KZ0

Basic Operating Instructions

Digital Camera

Model No. DMC-FZ300

Please read these instructions carefully before using this product, and save this manual

for future use.

More detailed instructions on the operation of this camera are

contained in “Operating Instructions for advanced features (PDF

format)” in the supplied disc.

SQT1120 (ENG)

Dear Customer,

We would like to take this opportunity to thank you for purchasing this Panasonic Digital

Camera. Please read these Operating Instructions carefully and keep them handy for

future reference. Please note that the actual controls and components, menu items, etc.

of your Digital Camera may look somewhat different from those shown in the illustrations

in these Operating Instructions.

Carefully observe copyright laws.

• Recording of pre-recorded tapes or discs or other published or broadcast material for

purposes other than your own private use may infringe copyright laws. Even for the

purpose of private use, recording of certain material may be restricted.

Information for Your Safety

WARNING:

To reduce the risk of fire, electric shock or product damage,

• Do not expose this unit to rain, moisture, dripping or splashing.

• Use only the recommended accessories.

• Do not remove covers.

• Do not repair this unit by yourself. Refer servicing to qualified service

personnel.

The socket outlet shall be installed near the equipment and shall be easily accessible.

■

Product identification marking

Product Location

Digital camera Bottom

Battery charger Bottom

SQT1120 (ENG)

■

About the battery charger

CAUTION!

To reduce the risk of fire, electric shock or product damage,

• Do not install or place this unit in a bookcase, built-in cabinet or in another

confined space. Ensure this unit is well ventilated.

• The battery charger is in the standby condition when the AC power supply cord is

connected. The primary circuit is always “live” as long as the power cord is connected

to an electrical outlet.

■

About the battery pack

CAUTION

• Danger of explosion if battery is incorrectly replaced. Replace only with the type

recommended by the manufacturer.

• When disposing of the batteries, please contact your local authorities or dealer and

ask for the correct method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time

with doors and windows closed.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above 60 °C or incinerate.

SQT1120 (ENG)

■

Cautions for Use

• Do not use any other USB connection cables except the supplied one or a genuine

Panasonic USB connection cable (DMW-USBC1: optional).

• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).

• Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply

with the HDMI standards will not work.

“High Speed HDMI micro cable” (Type D-Type A plug, up to 2 m long)

• Always use a genuine Panasonic shutter remote control (DMW-RSL1: optional).

Keep this unit as far away as possible from electromagnetic equipment (such as

microwave ovens, TVs, video games etc.).

• If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be

disrupted by electromagnetic wave radiation.

• Do not use this unit near cell phones because doing so may result in noise adversely

affecting the pictures and/or sound.

• Recorded data may be damaged, or pictures may be distorted, by strong magnetic

fields created by speakers or large motors.

• Electromagnetic wave radiation may adversely affect this unit, disturbing the pictures

and/or sound.

• If this unit is adversely affected by electromagnetic equipment and stops functioning

properly, turn this unit off and remove the battery or disconnect AC adaptor (DMW-

AC10: optional). Then reinsert the battery or reconnect AC adaptor and turn this unit on.

Do not use this unit near radio transmitters or high-voltage lines.

• If you record near radio transmitters or high-voltage lines, the recorded pictures and/or

sound may be adversely affected.

SQT1120 (ENG)

Contents

■

Information for Your Safety ................ 2

Preparations

■

Before use ........................................... 7

■

Standard accessories ......................... 9

■

Names and Functions

of Main Parts ..................................... 10

■

Preparations ...................................... 12

Attaching the Lens Hood .............................12

Attaching the Lens Cap ...............................13

Attaching the Shoulder Strap ......................13

Charging the battery ....................................14

Inserting and removing the battery/the card

(optional) .....................................................15

Formatting the card (initialisation) ...............16

Opening the Monitor ....................................17

Setting the clock ..........................................17

Basics

■

Zoom lever/Side lever (Use zoom)

... 18

■

Shutter button (Taking pictures) ..... 18

■

Mode dial

(Select the recording mode) ............ 19

■

Focus mode lever ............................. 19

■

Side dial / Rear dial ........................... 20

■

Side button ........................................ 21

■

[LVF] button

(Switching between the monitor

and viewfinder) .................................. 22

■

Touch screen (Touch operations).... 22

■

Setting the menu ............................... 23

■

Calling frequently-used menus

instantly (Quick Menu) .................... 24

■

Assigning frequently used

functions to the buttons

(Function buttons) ............................ 24

Recording

■

Taking pictures with automatic

settings (Intelligent Auto Mode) ..... 25

Switching between Intelligent Auto Plus

Mode and Intelligent Auto Mode ..................25

Taking pictures using a handheld camera

([iHandheld Night Shot]) ..............................25

Combining pictures into a single still

picture with rich gradation ([iHDR]) .............26

Defocusing the background

(Defocus control function) ...........................26

Recording images by changing the

brightness (exposure) or colour tone ..........26

■

Recording motion pictures by

setting the aperture value/shutter

speed (Creative Video Mode) .......... 27

■

Setting the picture quality

and size .............................................. 27

Changing the aspect ratio of the

still pictures .................................................27

Setting the picture size ................................28

Setting the compression rate of pictures

([Quality]) .....................................................28

■

Taking close-up pictures

(Macro recording) ............................. 29

■

Taking pictures with

Manual Focus .................................... 29

■

Selecting a Drive Mode ..................... 30

■

Recording 4K Photos ....................... 31

Selecting pictures from 4K burst file and

saving ..........................................................32

■

Correcting jitter ................................. 33

■

Zoom types and use ......................... 33

■

Recording motion pictures .............. 34

Recording 4K motion pictures .....................35

SQT1120 (ENG)

Contents

■

About the symbols in the text

Indicates that the menu can be set by pressing [MENU/SET] button.

In this Operating Instructions, steps for setting a menu item are described as follows:

→ [Rec] → [Quality] → [ ]

Playback

■

Viewing your pictures ....................... 36

■

Viewing motion pictures .................. 37

■

Deleting pictures ............................... 38

■

Using the [Playback] menu .............. 39

[RAW Processing] .......................................39

Wi-Fi

■

What you can do with the

Wi-Fi

function .................................. 41

■

Operating the camera by

connecting it to a smartphone ......... 42

Installing the smartphone/tablet app

“Panasonic Image App” ...............................42

Connecting to a smartphone .......................43

Taking pictures via a smartphone

(remote recording) .......................................44

Playing back pictures in the camera on

a smartphone ..............................................44

Saving pictures in the camera to a

smartphone .................................................44

Sending pictures in the camera to

social networking services ..........................44

Adding location information to pictures

in the camera from a smartphone ...............45

Combining motion pictures recorded

with Snap Movie according to your

preference on a smartphone .......................45

Others

■

Reading the Operating Instructions

(PDF format) ...................................... 46

■

About supplied software .................. 47

Installing supplied software .........................47

■

List of monitor/viewfinder

displays .............................................. 48

■

Menu list ............................................ 52

■

Q&A Troubleshooting ...................... 54

■

Specifications .................................... 59

■

Digital Camera Accessory System

... 62

SQT1120 (ENG)

Preparations Preparations

Before use

Care of the camera

To avoid damaging your camera and to experience the maximum enjoyment you

should exercise the following precautions.

●

The lens, monitor and the camera body can sustain damage if the camera body is

dropped or subjected to excessive temperature, moisture, water or dust.

●

The monitor can be damaged if excessive pressure is applied to the screen surface,

during actual use or while cleaning.

■

Splash Proof

Splash Proof is a term used to describe an extra level of protection this camera offers

against exposure to a minimal amount of moisture, water or dust. Splash Proof does

not guarantee that damage will not occur if this camera is subjected to direct contact

with water.

In order to minimise the possibility of damage please be sure the following precautions

are taken:

• Make sure the built-in flash is closed.

• Make sure that all doors are securely closed.

• Make sure that you are in a dry and secure place when changing the battery or

memory card. After changing, make sure their protective doors are securely closed.

• If this camera is exposed to water, sand or any other foreign material clean it as soon

as possible, taking the necessary precautions that the foreign substance does not get

inside the camera.

• Under no circumstances should you place any foreign objects within the camera.

If sand, dust, or liquids such as water droplets adhere to the camera, wipe them off with

a dry soft cloth.

• Not doing so may result in incorrect recognition of touch operations or erroneous

flash display.

• If the monitor is closed when such liquids are present, malfunction may result.

■

Condensation

●

Condensation may occur on the lens, monitor or in the viewfinder when the room

temperature or humidity changes rapidly. This may cause the image to temporarily

become hazy. If this occurs, turn the camera off and allow the camera to sit so

that the camera temperature can stabilise to the room’s ambient temperature. The

required time will vary and can take up to an hour. It will clear by itself.

●

If you know that you will be moving between areas where there will be a large change

in temperature or humidity, you can help prevent condensation forming on the camera

by placing the camera in a large plastic zipper bag, so condensation will form on the

bag, not the camera. Allow the temperature to stabilise before removing the camera

from the bag.

Preparations

SQT1120 (ENG)

■

Caring for your camera

●

To clean your camera, remove the battery, the DC coupler (DMW-DCC8: optional) or

a card, or disconnect the power plug from the outlet, and wipe with a soft, dry cloth.

●

Do not press the monitor with excessive force.

●

Do not press the lens with excessive force.

●

Do not keep rubber or plastic products in contact with the camera for a long period of

time.

●

Do not use benzine, thinners, alcohol, or kitchen detergent, as these may damage the

outer casing and finish of the camera.

●

Do not leave the camera with the lens facing the sun as rays of light from the sun

may cause it to malfunction.

●

Do not extend the supplied cord or cable.

●

While the camera is accessing the card (for an operation such as picture writing,

reading, deletion, or formatting), do not turn off the camera or remove the battery,

card, AC adaptor (DMW-AC10: optional) or DC coupler (DMW-DCC8: optional).

●

The data on the card may be damaged or lost due to electromagnetic waves, static

electricity or breakdown of the camera or the card. We recommend storing important

data on a PC etc.

●

Do not format the card on your PC or other equipment. Format it on the camera only

to ensure proper operation.

SQT1120 (ENG)

Preparations

Standard accessories

Check that all the accessories are supplied before using the camera. Part numbers are as

of July 2015. These may be subject to change.

Battery pack

DMW-BLC12E

• Charge the battery

before use.

Battery pack is indicated as battery

pack or battery in the text.

Battery charger

DE-A80D

Battery charger is indicated as battery

charger or charger in the text.

AC cable

K2CA2YY00247

Lens hood

SYQ0547

Lens cap / Lens cap

string

VYQ5607

Shoulder strap

VFC4453

USB connection cable

K1HY08YY0031

DVD

SFM0100

• Software:

Use it to install the software on your

PC.

• Operating Instructions for advanced

features

• Cards are optional.

• SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card

in the text.

• Consult the dealer or your nearest Service Centre if you lose the supplied accessories.

(You can purchase the accessories separately.)

• Please dispose of all packaging appropriately.

• Keep small parts in a safe place out of the reach of children.

• The illustrations and screens in this manual may differ from the actual product.

Preparations

SQT1120 (ENG)

13 14

19 20 21 22 23 24 25

5 6

11 12

Shoulder strap eyelet (→13)

Shutter button (→18)

Zoom lever (→18)

Self-timer indicator /

AF Assist Lamp

[ ] (Exposure Compensation) button /

[Fn1] button (→24)

Motion picture button (→34)

[Fn2] button (→24)

Wi-Fi

connection lamp

Rear dial (→20)

Status indicator (→17)

Camera [ON/OFF] switch (→17)

Mode dial (→19)

Use this to select the recording mode.

Flash

Stereo microphone

Be careful not to cover the microphone

with your finger. Doing so may make

sound difficult to record.

Hot shoe

Flash open lever

The flash opens, and recording with the

flash becomes possible.

Diopter adjustment dial (→22)

[LVF] button (→22) /

[Fn4] button (→24)

[MIC] socket

An external microphone (optional) can

record higher quality audio than the

built-in microphone.

Speaker

Be careful not to cover the speaker with

your finger. Doing so may make sound

difficult to hear.

Side dial (→20)

Side button (→21)

Side lever (→18)

Lens barrel

Lens

Names and Functions of Main Parts

SQT1120 (ENG)

Preparations

Touch screen / monitor (→17, 22, 48)

Eye cup

Viewfinder (→22)

Eye sensor (→22)

[AF/AE LOCK] button

Focus mode lever (→19)

[ ] (Playback) button (→36)

[DISP.] button

Use this to change display.

Cursor button

• Selection of items or setting of

values etc., is performed.

• In this manual, the button that

is to be used is indicated by

[ ] (ISO sensitivity) ( )

[

] (White Balance) ( )

[

] (Drive Mode) ( ) (→30)

[

] (AF Mode) ( )

[MENU/SET] button

[Q.MENU ] (Delete/Cancel) button

(→24, 38) /

[Fn3] button (→24)

[REMOTE] socket

[HDMI] socket

[AV OUT/DIGITAL] socket

DC coupler cover (→15)

• Always use a genuine Panasonic AC

adaptor (DMW-AC10: optional).

• When using an AC adaptor, ensure

that the Panasonic DC coupler (DMW-

DCC8: optional) and AC adaptor

(DMW-AC10: optional) are used.

• When using an AC adaptor, use

the AC cable supplied with the AC

adaptor.

Card/Battery door (→15)

Release lever (→15)

Tripod mount

Do not attach this unit to tripods that

have screws with a length of 5.5 mm or

more. Doing so may damage this unit or

the unit may not be secured properly on

the tripod.

26 27 28 29

43 42 41 40

Preparations

SQT1120 (ENG)

Preparations

Attaching the Lens Hood

• Do not hold the lens hood in such a way that it will be bent.

• Make sure that the camera is turned off.

• Be sure to close the flash beforehand.

Align the mounting

mark on the lens

hood a little above the

mounting mark on the

tip of the lens

Mounting mark on

the tip of the lens

Mounting mark

on the lens hood

Turn the lens hood in the

direction of the arrow to secure it

Turn the lens hood until it clicks

and align the mounting mark on

the lens hood with the mark at the

bottom of the camera

• Make sure the lens hood is secured

properly and its reflection does not fall on

images.

Mounting mark

on the lens hood

Mark at the bottom

of the camera

●

When temporarily detaching and carrying the lens hood, we recommend attaching with the

orientation reversed.

Return it to the normal direction when taking pictures.

●

If you attach the lens hood while using the flash, the flash light would be blocked by the lens hood

causing the bottom part of images to be darkened (vignetting) and also making it impossible to

modulate the light. It is recommended to remove the lens hood before using the flash.

SQT1120 (ENG)

Preparations

Attaching the Lens Cap

Cover the lens with the lens cap to protect it when you are not taking pictures.

• Do not hang or swing around the camera with the lens cap string.

• Make sure to detach the lens cap when turning this unit on.

• Be careful that the lens cap string does not become entangled with the shoulder strap.

Shoulder strap eyelet

Pinch here to attach or

detach the cap.

Pass the string through the hole on the camera

Pass the string through the lens cap, and then pass the lens cap through the

loop formed by the string

Fasten the string

Attach the lens cap

Attaching the Shoulder Strap

We recommend attaching the shoulder strap when using the camera to prevent it from

dropping.

Pull the shoulder strap

2 cm or more.

Make sure the

strap does not

come off

• Perform steps

and then attach the other side of the shoulder strap.

• Use the shoulder strap around your shoulder.

– Do not wrap the strap around your neck. It may result in injury or accident.

• Do not leave the shoulder strap where an infant can reach it.

– It may result in an accident by mistakenly wrapping around the neck.

Preparations

SQT1120 (ENG)

Charging the battery

The battery that can be used with this unit is DMW-BLC12E or DMW-BLC12.

The battery is not charged when the camera is shipped. Charge the battery before use.

• Use the dedicated charger and battery.

Attach the battery paying attention to the direction of

the battery

Connect the charger to the electrical outlet

Charging light ([CHARGE])

On: Charging in progress

Off: Charging complete

If light is flashing:

• Battery temperature is too high or too low.

We recommend charging in a location where

the ambient temperature is between 10 °C

and 30 °C.

• Battery/charger connector is dirty. Clean with

a dry cloth.

• The AC cable does not

fit entirely into the AC

input terminal.

A gap will remain.

• Charge the battery with the charger indoors.

Detach the battery after charging is completed

■

Notes on charging time

Charging time Approx. 140 min

• The charging time indicated above is the time required for charging in case when the

battery is completely used up. The time required for charging differs depending on

conditions of battery usage. Charging takes longer in cases when temperatures are

either high or low and when the battery has not been used for a long period of time.

SQT1120 (ENG)

Preparations

Inserting and removing the battery/the card (optional)

• Always use genuine Panasonic batteries (DMW-BLC12E or DMW-BLC12).

• If you use other batteries, we cannot guarantee the quality of this product.

• Make sure that the camera is turned off.

Do not touch

the terminal

●

Battery:

Insert the battery all the way firmly until a locking sound is heard, and check that the

lever is hooked over the battery.

Move the lever in the direction of the arrow to remove the battery.

●

Card:

Insert the card all the way firmly until it clicks.

To remove the card, push the centre of the card until it clicks, then pull the card out

upright.

●

DC coupler cover ( ):

Make sure the DC coupler cover is securely closed, and then close the card/battery

door.

■

About the Card

The following SD standard-based cards (Panasonic brand recommended) can be used.

Type of Card Capacity Notes

SD Memory Cards 512 MB – 2 GB • Operation of the cards on the left has been confirmed

with Panasonic’s cards.

• Can be used with devices compatible with the

respective formats.

• This unit is compatible with UHS-

 UHS Speed

Class 3 standard SDHC/SDXC memory cards.

SDHC Memory Cards 4 GB – 32 GB

SDXC Memory Cards 48 GB – 128 GB

• Keep the Memory Card out of reach of children to prevent swallowing.

Preparations

SQT1120 (ENG)

■

About motion picture/4K photo recording and speed class ratings

According to the [Rec Format] (→35) and [Rec Quality] (→35) of a motion picture, the

required card differs. To record 4K photos, you need a card with a speed class rating

that supports 4K photo recording. Use a card that meets the following ratings of the SD

Speed Class or UHS Speed Class.

• SD Speed Class and UHS Speed Class are the speed standards regarding

continuous writing. Confirm the SD speed by checking the card label or other card

related materials.

[Rec Format] [Rec Quality] Speed class Label example

[AVCHD] All

Class 4 or higher

[MP4] [FHD]/[HD]/[VGA]

[MP4] [4K]/[High Speed Video] UHS Speed Class 3

When recording 4K photos UHS Speed Class 3

• Latest information:

http://panasonic.jp/support/global/cs/dsc/

(This site is available in English only.)

Formatting the card (initialisation)

Format the card before recording a picture with this unit. Since data cannot be

recovered after formatting, make sure to back up necessary data in advance.

Set the menu (→23)

→ [Setup] → [Format]

• A confirmation screen is displayed. If you select [Yes], the operation is executed.

SQT1120 (ENG)

Preparations

Opening the Monitor

Place your finger in the cleft on the right side of the monitor and open the

monitor toward the left side (maximum 180°)

It can be rotated 180° to the direction of the lens

Return the monitor to its original position

●

Only rotate the monitor after opening it wide enough, and be careful not to use excessive

force. Doing so may cause damage to this unit.

●

When not using the monitor it is recommended that you close it with the screen facing inward to

prevent dirt and scratches.

Setting the clock

The clock is not set when the camera is shipped.

Turn the camera on

• The status indicator lights up when you turn this unit on.

Press [MENU/SET]

Press to select the language, and press

[MENU/SET]

• The [Please set the clock] message appears.

Press [MENU/SET]

Press to select the items (year, month, day, hour,

minute), and press to set

Press [MENU/SET]

When [The clock setting has been completed.] is

displayed, press [MENU/SET]

When [Please set the home area] is displayed, press

[MENU/SET]

Press to set your home area and press

[MENU/SET]

Basics

SQT1120 (ENG)

Basics

Zoom lever/Side lever (Use zoom)

You can adjust the area of a picture to be taken using the zoom or side lever.

Zoom lever Side lever

Move the zoom lever

Slide the side lever

T side: Telephoto, Enlarge the subject

W side: Wide-angle, Capture a wider area

Turning angle is large: Zoom speed is high

Turning angle is small: Zoom speed is low

Slide width is large: Zoom speed is high

Slide width is small: Zoom speed is low

●

Do not touch the lens barrel during zooming.

●

For details about zoom types and use, refer to (→33).

• Press the [ ] button ( ) to set the drive mode to [ ] ([Single]).

Press the shutter button halfway (press lightly) to

focus on the subject

• The aperture value and shutter speed are displayed. (If the

aperture value and shutter speed are shown in red and flashing,

you do not have the appropriate exposure, unless you are using

the flash.)

Focus display

( When focus is aligned: illuminated

When focus is not aligned: flashing)

Shutter speed

Aperture value

Press the shutter button fully (push the button all

the way), and take the picture

●

Pictures can be taken only when the image is correctly focused as long as the [Focus/

Release Priority] is set to [FOCUS].

●

Even during menu operation or picture playback, if you press the shutter button halfway, you can

instantly set the camera ready for recording.

Shutter button (Taking pictures)

SQT1120 (ENG)

Basics

Mode dial (Select the recording mode)

Focus mode lever

Set to the desired recording mode

• Rotate the mode dial slowly to select the desired

mode.

Intelligent Auto Mode (→25)

Take pictures with automatic settings.

Intelligent Auto Plus Mode (→25)

Allows you to adjust the brightness (exposure) and colour hue as desired.

Programme AE Mode

Take pictures with automatic shutter speed and aperture value settings.

Aperture-Priority AE Mode

Determine aperture, then record pictures.

Shutter-Priority AE Mode

Determine shutter speed, then record pictures.

Manual Exposure Mode

Determine aperture and shutter speed, then record pictures.

Creative Video Mode (→27)

Determine aperture and shutter speed, then record motion pictures.

• You cannot take still pictures.

Custom Mode

Record pictures using pre-registered settings.

Panorama Shot Mode

Record panorama pictures.

Scene Guide Mode

Take pictures using Scene modes.

Creative Control Mode

Take pictures by selecting your preferred picture effect.

Set the focusing operation to be performed when the shutter button is pressed halfway.

[AFS/AFF]

Auto Focus. Focus is set automatically when the shutter

button is pressed halfway.

[AFS]: Focus will be fixed while it is pressed halfway.

[AFF]: If the subject moves while the shutter button is

pressed halfway, the focus is corrected to match

the movement automatically.

[AFC]

Auto Focus. While the shutter button is pressed

halfway, focusing is constantly performed to match the

movement of the subject.

[MF] Manual Focus. (→29)

Basics

SQT1120 (ENG)

Side dial / Rear dial

Rotate the side dial to adjust focus, and rotate the rear dial to set the aperture value and

shutter speed. You can also select items and set numeric values.

• This operating instructions describes operations of the dials as follows:

Rotating the side dial:

Rotating the rear dial:

Side dial

You can adjust focus in the following cases:

• In Manual Focus

• In Auto Focus

(Only when the focus mode lever is set to [AFS/AFF], and

[AF+MF] in [Custom] menu is set to [ON])

Rotating the side dial to the side :

Focusing on a nearby subject

Rotating the side dial to the side

Focusing on a distant subject

Rear dial

You can set the aperture value, shutter speed, and other settings when in following recording modes.

Mode dial

Rear dial



[ ]

Programme Shift

[ ]

Aperture value

[

]

Shutter speed

[

]

Shutter speed / Aperture value



You can make the settings with the side dial as well. (→21)



You can switch between the shutter speed setting operation and the aperture value setting

operation each time the [

] button/[Fn1] button is pressed.

Temporarily changing the items assigned to the side/rear dials

([Dial Operation Switch])

You can temporarily change the items assigned to the side/

rear dials using the function button to which [Dial Operation

Switch] is assigned.

[Dial Operation Switch] is assigned to [Fn2] at the time of

purchase.

• You can set the items to be assigned temporarily to the side/

rear dials in [Dial Operation Switch Setup] in [Dial Set.] in

the [Custom] menu.

Page is loading ...

Panasonic DMCFZ300SG Operating instructions

Panasonic DMCFZ300SG Operating instructions

Panasonic DMCFZ300SG Operating instructions

Related papers

Other documents