Summit CTR21LLF2 Operating instructions

CTR21LLF2
Summit
Brand
Summit
Model
CTR21LLF2
Type
Operating instructions

This manual is also suitable for

LLF2 Combination Cam Lock Instructions
I. Manufacturer’s combination
The manufacturer has set the combination code at 0-0-0-0.
II. Resetting the combination
a. Make sure the digit wheels are set at the correct code so that
the housing turns freely. The cam should be engaged so that
the doors of the appliance cannot open.
b.
Use a screwdriver or other tool to push down and hold the reset
button until you have entered your new code. (Fig. 1)
c. Turn the four digit wheels to your new combination code, then
release the reset button.
d. Make sure the housing is able to turn freely at the new setting.
Code setting is complete.
III. To lock
While the lock is in the unlocked position (i.e., the housing can be
turned by hand), randomly set the digit wheels to lock. (Fig. 2)
IV. To unlock
Turn the digit wheels to the correct code to unlock. (Fig. 3)
V. Use key to unlock
You can use the key to unlock if you forget the combination.
a. Insert key into the barrel. (Fig. 4)
b.
Turn the key 90 degrees to unlock. If the key is used to unlock,
the cam will also turn 90 degrees when the key is rotated.
However, the digit wheels will not rotate.
Randomize the
digit wheels
LLF2 combination
lock installed
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
PARTS
cam
housing
barrel
digit wheel
reset button
screwdriver
  • Page 1 1

Summit CTR21LLF2 Operating instructions

CTR21LLF2
Summit
Brand
Summit
Model
CTR21LLF2
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents