2. Satechi
  3. USB-C Hybrid Multiport Adapter
USB-C Hybrid Multiport Adapter

Satechi USB-C Hybrid Multiport Adapter User manual

  • Hello! I've read the instructional guide for the SATECHI Hybrid Multiport Adapter. This document explains how to install an SSD, and details the adapter's features, including USB-C PD charging, 4K HDMI output, and USB-A data ports. I'm ready to answer your questions about it!
  • What type of SSD is supported?
    What is the maximum power output of the USB-C PD port?
    What is the maximum resolution and refresh rate the HDMI port supports?
    Can the USB-A ports be used for charging?
    Can I use a CD reader with the adapter?
Use the USB-A data ports to connect two USB devices –
up to 5 Gbps. Does not support charging or CD readers,
including Apple SuperDrive
8
4K
Use the HDMI port to output 4K HDMI to an external monitor
or display – up to 60Hz.
Requires a direct HDMI-HDMI connection
7
Use the USB-C PD port to charge your device up to 100W.
~15W is used for the adapter’s operation
6
Connect the adapter to an USB-C port on your host device.
5
Insert the SSD (not included) faceup with the pins aligned
and push down on the screw to secure it into place.
Supports SATA M.2 SSD only, does not work with Nvme
3Once the SSD is secured, slide the cover back onto the
adapter.
4
Remove the screw and position it in the notch on the opposite
side of the pins.
2
To install the SSD, slide off the backside cover on the
adapter.
1
USB-C HYBRID MULTIPORT ADAPTER
INSTRUCTIONAL GUIDE
/