Kogan KASTDGLSBLA User guide

Brand: Kogan

Model: KASTDGLSBLA

Type: User guide

Kogan KASTDGLSBLA TV stand mount with shelf is the perfect solution for mounting your TV and keeping your entertainment area organized. With a weight capacity of 40kg, it can support most TVs from 37" to 70". The shelf can hold up to 5kg, providing ample space for your AV components or décor. The mount is easy to install and comes with all the necessary hardware. It also features cable management openings to keep your cords tidy. Whether you're looking to save space or simply want a more stylish way to display your TV, the Kogan KASTDGLSBLA TV stand mount with shelf is the perfect choice.

Kogan KASTDGLSBLA TV stand mount with shelf is the perfect solution for mounting your TV and keeping your entertainment area organized. With a weight capacity of 40kg, it can support most TVs from 37" to 70". The shelf can hold up to 5kg, providing ample space for your AV components or décor. The mount is easy to install and comes with all the necessary hardware. It also features cable management openings to keep your cords tidy. Whether you're looking to save space or simply want a more stylish way to display your TV, the Kogan KASTDGLSBLA TV stand mount with shelf is the perfect choice.

KOGAN TV STAND MOUNT

WITH SHELF

(SUITABLE FOR 37” – 70” TVS)

KASTDGLSBLA

Read the entire instruction manual before you start installation and assembly. If you have

any questions regarding any of the instructions or warnings, contact your local distributor for

assistance.

CAUTION: Use with products heavier than the rated weights indicated may result in

instability causing possible injury.

• Please closely follow the assembly instructions. Improper installation may result in

damage or serious personal injury.

• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.

• This product contains small items that could be a choking hazard if swallowed. Keep

these items away from children.

• This product is intended for indoor use only. Using this product outdoors could lead to

product failure and personal injury.

• Never exceed the maximum load capacities of 40kg (for the mount) and 5kg (for the

shelf) or it may result in product failure or personal injury.

IMPORTANT: Ensure that you have received all parts according to the component checklist

prior to installation. If any parts are missing or faulty, contact your place of purchase for a

replacement.

MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at

least every three months).

SAFETY & WARNINGS

A Base (x1) B Lower stand (x1) C Upper stand (x1)

D Shelf (x1) E Wall plate (x1) F Brackets (x2) G Fastener (x2)

H Feet (x6) I (x3) J (x4) K (x3) L (x7) M (x4) N (x2) O (x1)

M-A M5x14 (x4) M-B M6x14 (x4) M-C M6x30 (x4)

M-D M8x30 (x4) M-E M8x50 (x4)

M-F (x4) M-G (x8) M-H (x8)

Required for installation (not supplied)

Phillips head

screwdriver

COMPONENTS

Step 1

Attach feet (H) to bottom of base (A).

Step 2

Using the Allen key (O), secure the lower stand (B) to the base (A) using x3 I screws, along

with x3 K and L washers.

MOUNT ASSEMBLY

Step 3

Insert upper stand (C) into the lower stand (B) and secure with the x4 J screws.

Step 4

Attach the wall plate (E) to the upper stand (C) using the M screws and remaining x4 L

washers.

Step 5

Attach the shelf (D) to the lower stand, first by inserting the tab of the shelf into the opening

in the lower stand (refer to figure 1 below), then securing with x2 N screws (figure 2). Use a

Phillips head screwdriver (not supplied) to secure the screws.

Align the bracket with your TV’s VESA holes and secure using supplied screws and square

spacers (M-F) depending on required length. Use a Phillips head screwdriver (not supplied) to

secure the screws.

Check if additional spacers (M-G, M-H) are required to ensure correct length of screw, as per

the below image. Failure to follow this step may result in damage to your TV or wall mount.

INSTALLING BRACKET TO TV

Hook the TV with brackets installed onto the wall mount at the desired height. Two people

should carry the TV to prevent damage.

Once in place, attach and tighten the fasteners (G) using a Phillips head screwdriver.

SECURING TV TO MOUNT

Use the openings in the stand assembly for cable management.

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com

1
2
3
4
5
6
7
8
9
10
11
12

Kogan KASTDGLSBLA User guide

Brand: Kogan

Model: KASTDGLSBLA

Type: User guide

Kogan KASTDGLSBLA TV stand mount with shelf is the perfect solution for mounting your TV and keeping your entertainment area organized. With a weight capacity of 40kg, it can support most TVs from 37" to 70". The shelf can hold up to 5kg, providing ample space for your AV components or décor. The mount is easy to install and comes with all the necessary hardware. It also features cable management openings to keep your cords tidy. Whether you're looking to save space or simply want a more stylish way to display your TV, the Kogan KASTDGLSBLA TV stand mount with shelf is the perfect choice.

Other documents