Thank you for choosing this product.
This product is a high-capacity 22.5 watt QC + PD
Powerbank that uses a Li-polymer battery and chip for a
safe, efficient, and compatible user experience.
Product Overview
• Make sure your power bank is fully charged before its
first use.
• When charging a device with the power bank, please
check for the battery charging icon on the device to
ensure proper functioning of the power bank.
• Once your device is fully charged, disconnect the
power bank to avoid further discharge.
• Use BIS approved adapter for charging the power
bank.
• Use and charge your power bank in a ventilated space.
• Do not leave the power bank under direct sunlight
e.g. in a car, near the window, etc.
• Do not open the casing as it may cause cell damage
and other dangers.
• Do not dismantle, crush, or puncture the power bank.
Do not expose it to liquids, fire, or temperatures above
60°C (140°F).
• Please do not discard the product with household
waste. Kindly follow the local environmental
regulations for proper disposal of the used product.
Precaution
Charging
Connect with a compatible power adapter to charge the
power bank. The indicator shows charging conditions as
follows:
Blinking
Power
LED 1
0-25%
LED 2
25-50%
LED 3
50-75%
LED 4
75-100%
Blinking
Power
LED 1
0-25%
LED 2
25-50%
LED 3
50-75%
LED 4
75-100%
Discharging
Connect your device with the power bank to charge it.
The indicator shows discharging conditions as follows:
Note: The power check button is not a power button.
The power bank detects charging and discharging
automatically. The power indicator goes off 2 minutes
after fully discharged.
Safety: The power bank has multiple safeguard
technologies to provide over-charge, over-discharge,
high temperature, and short circuit protection in all
working conditions.
Eciency: The power bank supports Quick charge (QC)
and Power Delivery (PD) with speed upto 22.5 Watts. It is
also capable of dual charging with upto 3.1 Amp 5V
charging speed when connected with two devices.
Capacity: 20000mAh 3.85V(77Wh)
Type-C1/C2 Input: 5V/2.4A, 9V/2A, 12V/1.5A
(18W Max)
Type-C1/C2 Output: 5V/3A, 9V/2.22A, 12V/1.67
(20W Max)
USB-A Output: 5V/3A, 9V/2A, 12V/1.5A, 10V/2.25A
(22.5W Max)
Dual Output: 5V/3.1A (15.5W Max)
Size: 108.20 x 28 x 69mm
Weight: 293 g
Battery Type: Li-Polymer
Specifications
White light on LED 1 indicates fast charging mode.
Green light on LED 1 indicates the activation of superfast
charging mode.
White light on LED 1 indicates fast charging mode.
Green light on LED 1 indicates the activation of superfast
charging mode.
Type - C Input/Output
Type - C Input/Output
USB Output
Power Check
Power Indicator
Fast Charging Superfast Charging Fast Charging Superfast Charging
20K urbn 22.5 User Manual 7.5cmX10cm