Page is loading ...
OVERVIEW
ABOUT THIS ITEM
● JET FLOW TECHNOLOGY : 2300 maximum PSI with rapid rinse and high area reach (50%
more flow)
● BRUSHLESS MOTOR : TruBrushless Motor & Smart Flow water pressure-sensing technology,
assuring you of the perfect amount of pressure delivery
● 25 FT HOSE : Kink resistant 25-foot hose, 35-foot power cord with inline GFCI for use on
exterior outlets, Large 10" wheels for easy maneuverability
● ACCESSORIES : Easy to grip spray nozzle, Metal quick connect wand comes with 15°, 25°,
40°, soap & turbo nozzle
● PWMA CERTIFIED : 3 Year Limited Tool and 10 Year Brushless Motor Warranty (Best in
Industry), Certified by the Pressure Washer Manufacturers’ Association (PWMA).
● Product 1: Performance tested and rated in accordance with PWMA standards
● Product 1: 2300 PSI and 2.3 GPM Brushless Pressure Washer for efficient cleaning of
residential areas
● Product 1: Ideal for medium duty projects including but not limited to cleaning patio
furniture, grills, walkways, and vehicles
● Product 1: Digital controlled brushless motor for more torque, longer runtime, quiet
operation and longer life
● Product 2: Extreme flexibility under pressure, from subzero to 140 Degree F
● Product 2: Made of Premium Hybrid Polymer
● Product 2: Integral non-kink bend restrictor
● Product 2: Max. working pressure at 70 Degree F: 3,100 psi - Cold water only
● 2300 PSI and 2.3 GPM Brushless Pressure Washer for efficient cleaning of residential
areas
● 11-inch cleaning width works Wonders for driveways, sidewalks, patios and decks
● Powerful 14A Brushless motor generates 2200 psi and 2. 3 gallons per minute for
maximum cleaning power. Pwma certified
● Metal quick connect wand comes with 15°, 25°, 40°, soap, and turbo nozzle. Tangle-Free
Hose Included
● Onboard detergent tank conveniently stores soap for easy application
● Rugged metal frame design with 8-in wheels for easy portability
● Perfect for medium-duty applications like cleaning cars, decks, windows, and other areas
around your house
● Hose Color May Vary (Blue or Green)
INSTALLING THE WHEELS
● Insert an axle through a wheel, the frame of the unit, and then a washer.
● Insert a cotter pin through the hole in the axle to secure. Repeat for second wheel.
ASSEMBLING THE HOSE HOOK
● Line up the hose hook upper end with the holes on the back of the upper panel.
● Insert the hose hook end into the hole and push through.|
● Press the hose hook lower end into the clip on the back of the upper panel
ASSEMBLING THE HANDLE
● Push and hold the button on the handle as you slide the handle into the slots in the frame
WARNING
This Quick Start Guide is not a substitute for reading the operator’s manual. To reduce the risk
of injury or death, user must read and understand operator’s manual before using this product.
USING DETERGENT
● Put pressure washer detergent in detergent tank.
● Install blue or black soap nozzle.
● Squeeze trigger and wait approx.1 minute for soap.
CONNECTING DESIRED SPRAY TIP
● Pull back the quick-connect collar
● Push the spray tip into place
● Push the collar forward
Set-up
● Connect garden hose to pressure washer water intake
● Assemble pressure washer gun to spray wand
● Insert high pressure hose into trigger handle
● Insert high pressure hose into the pressure washer.
● Turn on water at outlet
● Run water hose for 30 seconds with the motor in OFF
position. This helps drain air from the tank and lines.
● Connect power cord to wall outlet Extension cord not recommended.
● Turn on Pressure Washer
IMPORTANT: Ensure water outlet is On
before turning power On to avoid damage to
the pump.
●How do I install the wheels on my Greenworks GPW 2300 PSI Pressure Washer?
Insert an axle through a wheel, the frame of the unit, and then a washer. Insert a cotter pin
through the hole in the axle to secure. Repeat for second wheel.
Manuals.plus
●How do I assemble the upper panel and spray gun holder on my Greenworks GPW 2300
PSI Pressure Washer?
Line up the screw sleeves with the holes in the upper handle and push through. Insert the
screw and turn clockwise with a phillips head screw driver (not included) until the screw is tight
●How do I assemble the hose hook on my Greenworks GPW 2300 PSI Pressure Washer?
Line up the hose hook upper end with the holes on the back of the upper panel. Insert the hose
hook end into the hole and push through. Press the hose hook lower end into the clip on the
back of the upper panel.
Manuals.plus
●How do I assemble the handle on my Greenworks GPW 2300 PSI Pressure Washer?
Push and hold the button on the handle as you slide the handle into the slots in the frame.
●How do I use detergent with my Greenworks GPW 2300 PSI Pressure Washer?
Put pressure washer detergent in detergent tank. Install blue or black soap nozzle. Squeeze
trigger and wait approx.1 minute for soap.
●How do I connect a desired spray tip to my Greenworks GPW 2300 PSI Pressure
Washer?
Pull back the quick-connect collar. Push the spray tip into place. Push the collar forward.
/
