2. WATERWARE
  3. THE9W54E99

WATERWARE THE9W54E99 User manual

  • Hello! I am an AI chatbot trained to assist you with the WATERWARE THE9W54E99 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PLUMBING
ELECTRIC
Hot Wter Cylinders
135L, 185L
2022v1
waterwre.co.nz
Cold
Hot
EASY WASTE CONNECTION
TPR and cold water expansion
valve off set for easy waste
connection
SPACE SAVING
Top entry and exit ports
for easy reach and narrow
installation spaces.
LONG LASTING
Manufactured from premium grade
2304 Duplex stainless steel with
a 20 year limited warranty (refer
warranty terms and conditions for
details).
HIGH FLOW
20mm or 25mm high fl ow ports
according to tank size.
WIDE RANGE
(135L, 185L) options.
HANDSOME
Textured grey powder
coated fi nish.
RING-MAIN
Return port for ring-main
applications.
FAST INSTALL
Available with or without the Caleffi
‘direct mount mono-block’ combo
set which can save up to 50% in
installation time.
SOLAR READY
Two direct solar ports and three
thermostat probe pockets on
models 250L and over.
(250L Coming soon)
POWERFUL
Dual elements on models 250L
and over. (250L Coming soon)
CLEAN & TIDY
A concealed 2304 Duplex
stainless steel dip tube takes the
cold to the bottom of the tank.
INSULATION CLAM
Reduces heat loss
STRAPS AND BLOCKS
Safely secures tank
TRAY AND TUNDISH
In case of cylinder overfl ow
STRAPS AND BLOCKS
Protnk hot wter cylinders re designed for indoor instlltion mins
pressure domestic hot wter systems.
DESIGNED SMART IN NEW ZEALAND - BUILT TOUGH IN BRITAIN.
Protnk hs been developed to meet the needs of those home owners wnting  high
cpcity, high pressure hot wter system tht is going to lst.
The internl tnk nd fittings re crfted from the highest possible spec ‘Duplex’ 2304
stinless steel nd performnce mtched to Cleffi’s ltest high flow vlve set.
MODEL RANGE
Including
Vlve Set
Cylinder
Only Description Height x Ø
PTPC135 PTP135 135L, 3kW 1380mm x 475mm
PTPC185 PTP185 185L, 3kW 1800mm x 475mm
Models with vlve set include:
• Protnk hot wter cylinder
• Cleffi ‘direct mount mono-block’
combo set
• Cleffi TPR vlve
• Hetrod element(s) nd thermostt
Models without vlve set include:
• Protnk hot wter cylinder
• Cleffi TPR vlve
• Hetrod element(s) nd thermostt
Caleffi
‘Direct Mount Mono-block’
Combo Set
CALEFFI DIRECT MOUNT COMBO SET
20mm COMBO2015PRO (135L nd 185L models)
Protnks re vilble with or without the Cleffi ‘direct mount mono-block’ combo set which cn sve up to
50% in instlltion time when compred to instlling  trditionl hot wter cylinder with 3rd prty vlves nd
components. It connects to the cold nd hot connections vi Cleffi ’s full proof o-ring seled union connections.
The Cleffi direct mount combo sets include every primry vlve required to complete
n instlltion:
• 1 x mono-block tempering inlet vlve nd isoltors
• 1 x djustble pressure limiting vlve with striner
• 1 x cold wter expnsion vlve
• 1 x bll vlve
TV520150 20mm (135L, 185L)
PRV20 20mm (135L, 185L)
BV20M 20mm (135L, 185L)
TPR309470 15mm (135L, 185L)
DSV312407 15mm (135L and 185L)
RECIRCULATING SYSTEMS
The mono-block mnifold hs  blnking cp which when removed cts s  return port for  recirculting ring
min. Contct us for ring min set up or design dvice.
DIRECT MOUNTING OF THE TEMPERING VALVE
Notwithstnding cceptble methods detiled in G12, the mnufcturer Cleffi hve specifi clly engineered
this tempering control vlve to directly mount onto the hot wter cylinder with no minimum pipe length
isoltion requirement s n lterntive method of chieving complince.
SPECIFICATIONS
Generl Specifiction
Manufactured by Whitewolf
Country of origin UK
Pressure Rtings
TPR Setting 700 kPa
Cold water expansion setting 600 kPa
Maximum supply setting 500 kPa
Factory supply set point 300 kPa
Electricl
Cable / Sheath size 3x1.5mm / 8mm
Terminals Screw type, 4 mm
Thermostat supplier Heatrod
Thermostat model SH314C-CAICAI-STROM
Thermostat approval number EQ739-DAT9900155
Thermostat set point range 30 ºC-70 ºC
Thermostat factory set point 62 ºC
Thermal cutout set point 90 ºC
Thermal cutout reset Manual
Heating element supplier Heatrod
Heating element mount 1&3/4” Female threaded
Heating element sheath material Titanium
Heating element resistance 19.2 ohm
Heating element power density 9.6 w/cm²
Shell Construction
Shell type Single skin
Shell material 2304 Duplex SS
Thickness 1 mm
Circumferential joint Tig butt weld
Longitudinal joint Tig butt weld
Cse Construction
End material Polypropylene
End thickness 2 mm
Wall material Painted Galvanized steel
Wall thickness 0.45 mm
End joint Press fit
Wall joint Lock form joint
Therml Insultion
Insulation specification EPC/IsoPMDI
Wall thickness 50 mm
Base thickness 10 mm
Top thickness 50 mm
Technicl Specifiction
Capacity 135L 185L
Inlet / Outlet ports 20mm 20mm
TPR / CWE ports 15mm 15mm
Solar ports (qty x Ø) none none
Dry stat pockets (qty x Ø) none none
Heating element 3kW 3kW
Overall (Height x Ø) 1380 x 475mm 1800 x 475mm
Internal shell (Height x Ø) 1350 x 375mm 1785 x 375mm
Weight full 157kg 210kg
Weight empty 22kg 30kg
PORT LAYOUT
135 nd 185L Models
Model 135L 185L
A. Inlet/Outlet height 1380mm 1800mm
B. TPR Valve 1150mm 1570mm
C. Element 260mm 260mm
D. CWE Valve 215mm 215mm
E. Inlet/Outlet centres 110mm 110mm
A B C D
E
PROTANK 20 YEAR LIMITED WARRANTY
All terms of the warranty, subject to the conditions below, are effective from the date of installation if proof of installation date
can be provided. Where the date of installation is not known or cannot be proven, the warranty will commence one month after
proof of purchase date.
Single Residentil Domestic Wrrnty
A single residential domestic installation is defined as an installation where the hot water cylinder with a factory set thermostat
delivers hot water to a privately owned single family residential dwelling which is not used for commercial purposes.
Protnk Excluding Vlves nd Element
5 YEARS FREE PARTS and LABOUR costs to replace or repair the cylinder if it fails due to manufacturing defect.
Followed by;
5 YEARS FREE PARTS ONLY costs (excluding labour) to replace or repair the cylinder if it fails due to manufacturing defect.
Followed by;
10 YEARS *PRO-RATA PARTS ONLY reducing costs (excluding labour) according to the below formula, to replace or repair the
cylinder if it fails due to manufacturing defect.
*Pro-Rata Formula = Original purchase price x remaining warranty in years ÷ total warranty period of the cylinder.
Cleffi Vlves (excluding ny 3rd prty vlves)
5 YEARS FREE PARTS and LABOUR costs to replace or repair any valve that fails due to manufacturing defect.
Protnk Element Only;
12 MONTHS FREE PARTS and LABOUR costs to replace or repair the element if it fails due to manufacturing defect.
Commercil Applictions Wrrnty
Any installation not considered to be a single residential domestic type.
Protnk nd Cleffi Vlves Excluding Element
5 YEARS FREE PARTS and LABOUR costs to replace or repair the cylinder or valves if failure is due to a manufacturing defect.
Protnk Element Only;
12 MONTHS FREE PARTS and LABOUR costs to replace or repair the element if it fails due to manufacturing defect.
Refer to full terms, conditions nd exclusions in the instlltion/owners mnul
waterware.co.nz
[email protected]
ph +64 9 273 9191
/