Ram Mounts RMR-INS-BM-L1 User manual

Hello! I'm a chat assistant and I've reviewed the Assembly Instructions for the RAM Mounts Body Mount for Legs. This document provides detailed instructions on how to assemble the mount using buckle straps, screws, washers, and nuts. I'm familiar with the part index, safety precautions, and steps for assembly. I'm ready to answer any questions you may have about this product.
What parts are included in the assembly?

What is important to note while installing this product?

Where can I find more mounting options?

1 2

3 4

Assembly Instructions

for RAM® Body Mount for Legs

rammount.com

1.800.497.7479

[email protected]

To see more mounting options, visit rammount.com This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.

Safety Precaution

Do not install this product near or over an airbag deployment area or in a location that obstructs the driver’s vision or interferes with vehicle

operation. National Products, Inc does not assume responsibility or liability for any such personal injury, death or property damage.

RMR-INS-BM-L1

Remove male buckle from (B) Buckle Strap, and route through

slots of (A) Body Mount Base as shown.

Re-route (B) Buckle Strap through the male buckle as shown.

Repeat for second (B) Buckle Strap. Route any excess strap back through the (A) Body Mount Base slots.

Use (C) Screws, (D) Washers and (E) Nuts to connect any RAM® holder or

mounting components.

Part Index

*not to scale