- 4 -
HOW TO MEASURE (VOLUME MODE)
1. Place the main unit on a hard, flat surface.
2. Place the removable measuring cup in the main unit before turning the power on.
3. Press ON/OFF/ZERO to turn the device ON.
4. Wait until “0” is displayed on the LCD screen.
5. Press the MODE button to select water, milk, oil or flour.
6. Load your food (water, milk, oil or flour) into the measuring cup.
7. The volume of the food will be displayed on the LCD screen.
NOTE: Press the UNIT button to toggle between Cups and Milliliters.
TARE / ZERO FUNCTION
The Smart Measuring Cup lets you weigh multiple loads consecutively without removing loads from
the scale.
1. Place the first load into the cup and obtain the weight reading as described above.
2. Press the ON/OFF/ZERO button to reset the LCD to “0.”
3. Add the second load. You will see the weight of the SECOND load only.
4. Repeat as needed for each successive load.
NOTE: If the empty cup does not read “0,” press the ON/OFF/ZERO button to zero out the scale.
AUTO SHUTOFF
To conserve battery power, Smart Measuring Cup will shut off automatically if the display shows “0”
or the same weight for 30 seconds.
MANUAL SHUTOFF
To turn off the Smart Measuring Cup, press the ON/OFF/ZERO button for 3 seconds.
WARNING INDICATORS
LO = Low batteries. Replace with 2 new AAA batteries.
ERR = Device is overloaded. Remove item to avoid damage.
NOTE: The maximum weight capacity is 50 oz. (3.1 lbs.). The maximum volume capacity is 6.25
cups (1500ml).