Eaton MT3800T Operating instructions

Type
Operating instructions

Eaton MT3800T is a molded case circuit breaker accessory trip unit with an 800A amperage rating and thermal magnetic trip type. It's designed for use with type MDL and HMDL breakers, and is part of the Series C product line. This device offers protection against overloads and short circuits, and can be used in a variety of applications, including residential, commercial, and industrial settings.

Eaton MT3800T is a molded case circuit breaker accessory trip unit with an 800A amperage rating and thermal magnetic trip type. It's designed for use with type MDL and HMDL breakers, and is part of the Series C product line. This device offers protection against overloads and short circuits, and can be used in a variety of applications, including residential, commercial, and industrial settings.

Production Specifications
Eaton MT3800T
Catalog number: MT3800T
Eaton molded case circuit breaker accessory trip unit, Trip unit, 800 A,
Three-pole, Thermal magnetic, For type MDL and HMDL breakers, Series C
General specifications
Eaton molded case circuit breaker
accessory trip unit
MT3800T
782114350133
8.5 in 5.5 in
5.5 in 2.88 lb
Eaton Selling Policy 25-000, one (1) year
from the date of installation of the
Product or eighteen (18) months from the
date of shipment of the Product,
whichever occurs first.
Contact Manufacturer
UL Listed
Product Name Catalog Number
UPC
Product Length/Depth Product Height
Product Width Product Weight
Warranty Compliances
Certifications
Eaton Corporation plc
Eaton House
30 Pembroke Road
Dublin 4, Ireland
Eaton.com
© 2022 Eaton
All Rights Reserved
Eaton is a registered trademark.
All other trademarks are
property of their respective
owners.
Eaton.com/socialmedia
defaultTaxonomyAttributeLabel
Series C
Trip unit
For type MDL and HMDL breakers
800 A
Thermal magnetic
Three-pole
Resources
Application of Multi-Wire Terminals for Molded Case Circuit Breakers
UL listed 100%-rated molded case circuit breakers
Application of Tap Rules to Molded Case Breaker Terminals
Multi-wire lugs product aid
Current limiting Series C molded case circuit breakers product aid
Motor protection circuit breakers product aid
StrandAble terminals product aid
Plug-in adapters for molded case circuit breakers product aid
Power metering and monitoring with Modbus RTU product aid
Circuit breaker motor operators product aid
Breaker service centers
Eaton's Volume 4—Circuit Protection
Molded case circuit breakers catalog
Flex shaft handle installation tutorial
Series C J-Frame molded case circuit breakers time current curves
MOEM MCCB product selection guide
Series C G-Frame molded case circuit breakers time current curves
Eaton Specification Sheet - MT3800T
Series C F-Frame molded case circuit breakers
Series
Type
Used with
Amperage Rating
Trip Type
Number of poles
Application notes
Brochures
Catalogs
Multimedia
Specifications and datasheets
  • Page 1 1
  • Page 2 2

Eaton MT3800T Operating instructions

Type
Operating instructions

Eaton MT3800T is a molded case circuit breaker accessory trip unit with an 800A amperage rating and thermal magnetic trip type. It's designed for use with type MDL and HMDL breakers, and is part of the Series C product line. This device offers protection against overloads and short circuits, and can be used in a variety of applications, including residential, commercial, and industrial settings.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI