ASSEMBLY INSTRUCTION MODEL #HAY-1403-AG
LIGHTING THE WAY FOR SIXTY YEARS
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
WARNING:
Electrical Danger Turn Power Off
R
CUL
You will need 8-Candelabra Base Bulb
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
How to Install
Crystal Sets
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
DETAILED ILLUSTRATION
The fixture is dry rated
1. Attach the mounting plate onto the outlet box using two
outlet screws.
2. Hang the frame onto the mounting plate by hooking the
cable wire into the slots as shown.
3. Install bulbs (not included) and proceed to connecting the
power.
4. Insert the pin into the crystal and then insert the crystal
onto the band ring.
5. After all the crystal are installed, raise the fixture up to
the ceiling and secure with the finial.
B. 24Sets. (1)30x150mm
A. 12Sets. (1)30x200mm
Pin
C
8"
18"
20 20
200
150
AB
20
100
C
C. 36Sets. (1)30x100mm
B
A
LIGHTING THE WAY FOR SIXTY YEARS
PART NUMBER MODEL #HAY-1403-AG
Part Number
Part Numbers
B.(1)-Mounting Plate
C.(2)-Outlet Box Screws
D.(2)-Ground Wire
E.
F.(1)-Frame
A.(2)-Wire Connector
G.(1)-Washer
PART BAGⅠ: Includes Parts A, C
(2)-Cable Wire
H.(1)-Nut
I.(1)-Check Ring
J.(1)-Finial (XFB1400AGFIN)
PART BAG Ⅱ: Includes Parts B, G, H, I, J
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Crystorama HAY-1403-PN User manual
-
Crystorama HAY-1400-PN User manual
-
Crystorama 724-OB-CL-S Installation guide
-
Crystorama 718-CH-CL-SAQ User manual
-
Crystorama 1061-PB-CL-MWP User manual
-
-
Crystorama 1155-CH-CL-MWP User manual
-
Crystorama 5085-PB-CL-MWP User manual
-
-
Crystorama 5086-PB-CL-MWP User manual