ALDI 709610 is a 20V Li-Ion Cordless Blower Skin that offers powerful performance for clearing leaves and debris from your yard. Its lightweight design ensures easy handling, while the variable speed control allows you to adjust the airflow to suit your needs. The blower comes with a blow tube for directing the airflow, and it's compatible with the FERREX® 20V Li-Ion battery system.
ALDI 709610 is a 20V Li-Ion Cordless Blower Skin that offers powerful performance for clearing leaves and debris from your yard. Its lightweight design ensures easy handling, while the variable speed control allows you to adjust the airflow to suit your needs. The blower comes with a blow tube for directing the airflow, and it's compatible with the FERREX® 20V Li-Ion battery system.
User Manual
709610
20V LIION CORDLESS BLOWER SKIN
Read all safety warnings and all instructions
thoroughly before operating this product.
Ensure you keep your manual in a
safe place for future reference.
IM ed 2; 10/2022
Product
Info
MODEL No.: TGT2001, PRODUCT No.: 700069
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or accessories,
details on warranties or after sales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
nd out more about the Aldi product you have
purchased*.
* Depending on your tari you may be charged
for the connection.
Product
Info
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION.
The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. The benets conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty details
MODEL No.: CBV18F.9 • 10/2022 • 709610
20V Li-Ion Cordless Blower Skin
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]1800 909 909
5
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
Contents
Pack contents / parts 2
Description of symbols 3
General Safety Warnings 5
Additional safety warnings for cordless Blower 8
Parts List 10
Assembly 11
Unpacking 11
Removing or installing the battery pack 11
Operation 12
Starting & stopping 12
Using the blower 12
Adjusting the blowing speed 13
Residual risk 13
Maintenance 14
Clean and Storage 14
Cleaning the blower 14
Storage 14
Warranty 15
Environmental Protection 15
What your 3 year warranty means 16
Service Support 16
Accessories and After Sales Parts 16
Troubleshooting 17
Technical Specications 17
MODEL No.: TGT2001, PRODUCT No.: 700069 3
Congratulations on the purchase of your FERREX® 20V Li-Ion Cordless Blower
Skin. When you open your packaging, rst remove all items and check there are
no parts damaged or missing. If you nd anything wrong, do not operate the
product until the parts have been replaced or the fault has been rectied. Failure
to do so could result in serious personal injury.
Application
First time users or inexperienced operators pay particular attention to the
operation of the 20V Li-Ion Cordless Blower Skin, including details of starting and
stopping and correct use of the 20V Li-Ion Cordless Blower Skin on pages 12-13,
as well as the maintenance instructions on page 14.
Intended use of the 20V Li-Ion Cordless Blower Skin
It is exclusively intended for home use. It is not designed for trade or commercial
use.
This 20V Li-Ion Cordless Blower Skin is intended for residential use only. Use the
blower outdoors to move yard leaves and debris as needed.
Any other use or change to the appliance is deemed improper and poses a
signicant risk of accidents.
Contents of carton
1 x 20V Blower (skin)
1 x Blow tube
1 x Instruction Manual
1 x Warranty Card & details
Pack contents / parts
2
MODEL No.: CBV18F.9, PRODUCT No.: 709610
MODEL No.: TGT2001, PRODUCT No.: 70096
Description of symbols
The instruction manual, rating plate, or on the product itself, may show
these symbols. These represent important information about the product or
instructions on its use.
To reduce the risk of injury, user must read instruction manual
Keep bystanders away.
Warning of hazard
Do not use in the rain or leave outdoors while it is raining.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear eye protection.
To reduce the risk of injury, user must read instruction manual
32 MODEL No.: CBV18F.9, PRODUCT No.: 709610
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
4
60
Box
Conforms to relevant standards for electrical safety and electromagnetic
compatibility.
Warning
60 Months Warranty
The box is recyclable at the kerbside.
The inserts are recyclable at the kerbside.
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, re
and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
5
General safety warnings
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
6
e) When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the o-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your nger
on the switch or energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
b) Do not use the power tool if the switch does not turn it on and o.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may aect the
power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specied by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of re
when used with another battery pack.
b) Use power tools only with specically designated battery packs. Use
of any other battery packs may create a risk of injury and re.
c) When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a re.
d) Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, ush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
7
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
6) Service
a) Have your power tool serviced by a qualied repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
Additional safety warnings for cordless Blower
- This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction con-
cerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the
appliance.
The appliance is designed only for blowing of dry leaves in private house-
holds and as a hobby appliance in the garden. Any other utilization, which is
not explicitly approved in these directions, can lead to damage to the
appliance and represent a serious danger to the user.
• The appliance is designed for use by adults. Young people over 16 years
may use the appliance under supervision only.
•
The use of the appliance in the rain or in a humid environment is forbidden.
• The manufacturer is not liable for damage which is caused through
inappropriate use or incorrect operation.
NOTE: Do not employ and low power machines for heavy work. DO NOT use
your device for purposes for which it has not been designed.
WARNING! To reduce the risk of injury, user must read and
understand instruction manual.
1) Training
a) Read the instructions carefully. Be familiar with the controls and the proper
use of the appliance.
b) Never allow children to use the appliance.
c) Never allow people unfamiliar with these instructions to use the appliance.
Local regulations may restrict the age of the operator.
d) Never operate the appliance while people, especially children, or pets are
nearby.
e) The operator or user is responsible for accidents or hazards occurring to
other people or their property.
8
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
2) Preparation
a) While operating the appliance, always wear substantial footwear and long
trousers. Do not operate the equipment when barefoot or wearing open
sandals.
b) Do not wear loose clothing or jewellery that can be drawn into the air
inlet. Keep long hair away from the air inlets.
c) Wear protective goggles while operating.
d) To prevent dust irritation the wearing of a face mask is recommended.
e) Never operate the appliance with defective guards or shields, or without
safety devices.
3) Operation
a) Take o the battery from the appliance,
- when not in use;
- before clearing a blockage;
- before checking, cleaning or working on the appliance;
- if the appliance starts to vibrate abnormally.
b) Operate the appliance only in daylight or in good articial light.
c) Do not overreach and keep your balance at all times.
d) Always be sure of your footing on slopes.
e) Walk, never run;
f) Keep all cooling air inlets clear of debris.
g) Never blow debris in the direction of bystanders.
h) Do not put hands or feet near or under rotating parts.
4) Maintenance and storage
a) Keep all nuts, bolts and screws tight to be sure the appliance is in safe
working condition;
b) Replace worn or damaged parts.
c) Use only genuine replacement parts and accessories.
d) Store the appliance only in a dry place.
9
10
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]1300 889 028
20V Li-Ion Cordless Blower Skin
11
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
20V Li-Ion Cordless Blower Skin
1800 909 909
1. On/o switch with variable speed control
2. Handle
3. Battery pack compartment
4. Motor housing
5. Blow tube
6. Tube release button
7. Battery pack release button*
8. Battery pack*
Parts List
2
6
13
4
8
7
5
* Battery is not included with this product
10
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]1300 889 028
20V Li-Ion Cordless Blower Skin
11
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
20V Li-Ion Cordless Blower Skin
1800 909 909
Assembly
WARNING: Before assembling and
disassembling the blower tube, be sure the
on/o switch is in ‘’0’’ O position and remove the
battery pack from the blower.
1. Unpacking (See Fig. A)
Unpack all parts and lay them on a at, stable
surface. You will nd a blower tube (5) is provided
with main machine. The blower tube (5) needs
to be tted to the blower housing before
proceeding to use.
2. Assembling and disassembling the blower tube
(See Fig. B1, B2)
To assemble, press the tube release button (6) and
slide the blower tube (5) into the motor housing (4).
Ensure the tube release button (6) on the blower
tube (5) aligns with the arrow (a) on the motor
housing (4).
To disassemble, press the tube release button (6),
and remove the blower tube (5) from the motor
housing (4).
NOTE: Do not try to separate the tubes by force or
by using tools.
3. Removing or installing the battery pack *
WARNING: Before inserting the battery
pack, make sure that the on/o switch (1) is
in OFF position.
Depress the battery pack release button (7) to
release and slide the battery pack (8) out from the
battery pack compartment (3). After recharging the
battery, slide the battery pack back into battery pack
compartment (3). A simple push and slight pressure
will be sucient. (See Fig. C)
* Battery is not included with this product
12
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]1300 889 028
20V Li-Ion Cordless Blower Skin
13
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
20V Li-Ion Cordless Blower Skin
1800 909 909
1. Starting & stopping (See Fig. D)
- Starting
Move the on/o switch (1) to the "1", "2", "3", "4"
or "MAX“ to start the blower.
Speed "1" is the lower speed. Speed "MAX" is the
highest speed.
- Stopping
Move the on/o switch (1) to the “0” O position.
WARNING! The blower runs for a few seconds after it has been
switched o.
NOTE: Let the motor come to a complete standstill before setting the
blower down.
2. Using the blower
WARNING: During operation of the blower it is recommended to
wear eye protection, a dust mask, and full hearing protection.
Ensure you are wearing suitable clothing.
User tips
- Adjust the blowing speed according to the desired working condition.
- Hold the blow tube approximately 20 cm above the ground when
operating the blower.
- Use a sweeping motion from side to side. Advance slowly keeping the
accumulated debris/leaves in front of you.
- After blowing the debris/leaves into a pile, it is easy to dispose of the
pile.
Caution!
- Do not blow hard objects such as nails, bolts, or rocks. It is
recommended to inspect the area you are blowing before starting use
Operation
D
12
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]1300 889 028
20V Li-Ion Cordless Blower Skin
13
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
20V Li-Ion Cordless Blower Skin
1800 909 909
to ensure this does not occur.
- Do not operate the blower near bystanders or
pets.
- Use extra care when cleaning debris from stairs
or other tight areas.
- Wear safety goggles or other suitable eye
protection, long pants, and shoes.
3. Adjusting the blowing speed (See Fig. E1, E2)
Move the on/o switch (1) to "1" position, and the
blower will run at a lower speed. (See Fig. E1)
Move the on/o switch (1) to "MAX" position, and
the blower will run at the highest speed.
(See Fig. E2)
E1
E2
Residual risk
Even if you use the 20V Li-Ion Cordless Blower properly per the instructions
provided and following all safety notes, there are always residual risks. The
following risk may occur:
- Accidental Starting: Always remove the battery pack from the blower before
carrying out any adjustment, servicing or maintenance. When not in use,
store the blower in a safe, dry, clean environment.
- Risk of blowing: Do not direct the output of the blower tube at any person,
the operator, or any animals. Never place hands in front of nozzle, direct
blowing away from self or others, and always operate in an area clear of all
persons, pets and obstacles. Do not operate the product when fatigued or
under the inuence of alcohol or drugs, stay alert at all times.
Reduce residual risks by using the 20V Li-Ion Cordless Blower with care and fol-
lowing all safety notes as well as other instructions.
14
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]1300 889 028
20V Li-Ion Cordless Blower Skin
15
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
20V Li-Ion Cordless Blower Skin
1800 909 909
Cleaning and Storage
1. Cleaning the blower
Clean the blower regularly after each use.
Warning!
- Keep your blower dry. Under no circumstances spray with water.
- To clean the blower, use only mild soap and a damp cloth.
- Do not use any type of detergent, cleaner or solvent which may
contain chemicals that could seriously damage the plastic.
- Self lubricating bearings are used in your product, therefore
lubrication is not required.
2. Storage
• Dry all parts thoroughly before using the device again or store it. Always
keep the openings clean and dry.
• Store the blower indoors, in a cool dry location, that is protected from
dust, moisture and direct sunlight and that is also out of the reach of
children and animals.
Maintenance
Remove the battery pack from the tool before carrying out any
adjustment, servicing or maintenance.
There are no user serviceable parts in your blower. Never use water or
chemical cleaners to clean your blower. Wipe clean with a dry cloth. Keep
the motor ventilation slots clean. Keep all working controls free of dust.
14
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]1300 889 028
20V Li-Ion Cordless Blower Skin
15
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
20V Li-Ion Cordless Blower Skin
1800 909 909
Warranty
Environmental protection
Recycle unwanted materials instead of disposing of them as waste. All
tools, hoses and packaging should be sorted, taken to the local recycling
centre and disposed of in an environmentally safe way. Dispose of used
motor oil in a manner that is compatible with the environment. We suggest you
take it in a sealed container to your local service station for reclamation. Do not
throw it in the trash or pour it into the earth.
Your new FERREX®
20V Li-Ion Cordless Blower Skin
will more than satisfy your
expectations.
It has been manufactured under stringent FERREX® Quality Standards to
meet superior performance criteria.
You will nd your new
20V Li-Ion Cordless Blower Skin
easy and safe to
operate, and, with proper care, it will give you many years of dependable
service.
CAUTION. Carefully read through this entire instruction manual before
using your new FERREX®
20V Li-Ion Cordless Blower Skin
.
Take special care to heed the Cautions and Warnings.
Your FERREX®
20V Li-Ion Cordless Blower Skin
has many features that will
make your job faster and easier. Safety, performance, and dependability
have been given top priority in the development of this
20V Li-Ion Cordless
Blower Skin
, making it easy to maintain and operate.
Use only FERREX® replacement parts for your product.
Non-conforming parts or modications made to parts will void your warranty.
Disposing of the packaging
Please make sure that the packaging is disposed of in an environmentally
friendly way.
Disposing of the product
If the product should no longer work at all, please make sure that it is
disposed of in an environmentally friendly way and according to local
regulations.
16
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]1300 889 028
20V Li-Ion Cordless Blower Skin
17
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
20V Li-Ion Cordless Blower Skin
1800 909 909
What your 5 year warranty means?
Service Support
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In the
event of product failure within its intended use over the course of the rst
5 years after the date of purchase, we will remedy the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product
please contact us via our after sales support services, details of which can be
found in this manual and on the product itself.
After Sales Support TEL: 1800 909 909
If you have any issues with the operation of your product, please call us
1800 909 909 for advice, or email us at info.aldi@positecgroup.com.
1. CBV18F.9-BT:
Replacement Blower
Tube
Accessories and after sales parts are available for purchase by visiting
https://help.tools/ or calling our customer service hotline on: 1800 909 909
Accessories and After Sales Parts
16
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]1300 889 028
20V Li-Ion Cordless Blower Skin
17
MODEL No.: CBV18F.9 • 10/2022 • 709610
AFTER SALES SUPPORT
(toll free)
20V Li-Ion Cordless Blower Skin
1800 909 909
Symptom Possible causes Solution
Product does not
start
1.1 Battery pack is not
installed correctly.
1.2 Battery capacity is low.
1.3 Battery pack is too hot/
cold.
1.1 Install the battery
pack per the instructions
provided.
1.2 Charge the battery pack.
1.3 Allow to cool/warm.
For further inquiries or issues associated with your
20V Cordless Blower Skin
,
call our Customer Service on 1800 909 909 or email us at
info.aldi@positecgroup.com
Troubleshooting
Technical Specications
Rated voltage 20 V d.c.
No-load speed 17000RPM
Blower speed 138km/h
Air volume 590m³/h
Product dimensions 820*280*170 mm
Machine weight 1.96 kg
This 20V Li-Ion Cordless Blower Skin is compatible only with the ALDI range
of 20V Xnity Plus Batteries and Chargers, which can be purchased at your
local ALDI store.
This 20 V Li-ion Cordless Blower complies with the following
standards:
Safety: AS/NZS 60335.1
AS/NZS 60335.2.100
EMC: CISPR 14-1
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
ALDI 709610 is a 20V Li-Ion Cordless Blower Skin that offers powerful performance for clearing leaves and debris from your yard. Its lightweight design ensures easy handling, while the variable speed control allows you to adjust the airflow to suit your needs. The blower comes with a blow tube for directing the airflow, and it's compatible with the FERREX® 20V Li-Ion battery system.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Workzone Titanium+ AG36 User manual
-
-
-
-
-
Gardenline SLM462 User manual
-
-
Ferrex 701256 User manual
-
Ferrex GFP1101 Owner's manual
-
ToolPro CBV18G.9 User manual
