2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical supplies
  5. Electrical wallplates
  6. Aria
  7. Flush No-See Niche

Aria Flush No-See Niche Installation guide

  • I have reviewed the Installation Guide for the ARIA Flush No-See Niche [Luxe]. This document outlines the step-by-step process for installing the niche, including mounting the body, keypad, and customizing the finish. I'm ready to answer your questions about the installation process and product specifics.
  • What materials are needed to install the Flush No-See Niche?
    Can this niche be installed on floors?
    What is the first step in the installation process?
    How should the mounting body be fastened?
Flush No-See Niche
[Luxe]
Installation Guide
Door
www.ariavent.com/pages/patents
Mounting Plate
Body
Materials Needed
▪Screws and a screwdriver
▪Drywall compund and sanding material
*IMPORTANT*
▪For wall and ceiling surfaces ONLY
▪DO NOT Install on floors!
Remove Door and Mounting Plate.
Dry fit Body into place. Ensure wiring
is run through the hole.
Fasten Body in place with screws.
Mud and tape drywall compound
to cover flange.
Once dry, sand mud until
the surface transitions smoothly.
Repeat steps 2 & 3 as needed.
Mount keypad to Mounting Plate.
Run wire through the hole
in the center of the Mounting Plate.
Slide Mounting Plate and Door
back into place.
Customize the Niche and surrounding
surface with paint/wallpaper.
Patent Information
1
Made in Canada
Stud
2
34
56
/