NovoConnect NC-X700 Installation guide

2.1 Hardware Installation

Installing X700 or X900 is very simple and straight-forward.

The following two figures summarize the key peripheral ports

available. (You may refer to the Quick Start Guide for

details.)

X700 Key Peripheral Ports

X900 Key Peripheral Ports

Typically,

users just need to attach the following four ports

Attach the WiFi antenna1.

Connect the HDMI cable2.

Plug in the Ethernet port3.

Apply the DC power with the AC-DC adaptor provided4.

The AC-DC power adaptor comes with several types of plugs, one

of which should be suitable to the power outlets used in your

country or region.

AC-DC Adaptor with Changeable Plug

In addition, a simple mounting kit is also available in the

package, with which you could mount the X700/X900 main unit in

your settings, like on the wall, beneath a conference table,

etc.

Mounting Kit for X700 and X900

This manual is also suitable for