Quick Start
Guide
XBee-PRO® 900HP RF
Module
1Verify the components
XBee 900HP
RFModem
Mini USB cable
(RS-232 and
RS-485
variants only)
USB cable
(USB variant
only)
DB9 cable (RS-
232 variant
only)
RPSMAantenna
Power supply
Phoenix connector (RS-485 variant only)
2Symbols on the RFmodem
RSSI LEDs Reset button RS-232 Serial port
I/O LEDs
Red - Association
Green - Transmit from host
Yellow - Receive from host
Switch 1 - termination for 2-wire configuration
Switch 2 - termination for 4-wire configuration
RS-485 Serial port
Commissioning button Power supply (7-30 VDC)
Antenna port USB port
3Next steps
To get started with your kit go to:
www.digi.com/products/xbee-rf-solutions/modems/xbee-pro-900hp-rf-modems
Digi Technical Support: Digi offers multiple technical support plans and service packages to help our customers get the most out of their Digi
product. For information on Technical Support plans and pricing, contact us at 877.912.3444 or visit us at www.digi.com/support.
Documentation feedback: To provide feedback on this document, send your comments to techcomm@digi.com.
© 2016 Digi International Inc.
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other countries worldwide. All other trademarks mentioned in this
document are the property of their respective owners.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Digi ConnectPort X4 - DigiMesh 900 - Ethernet Important information
-
Digi XBee / XBee-PRO S2C 802.15.4 Module User guide
-
-
Digi XBee-PRO 868 Adapter User guide
-
-
Digi XBee XTender User manual
-
Digi ConnectPort X4 ZNet 2.5 2G GSM Intl Installation guide
-
Digi Thing Plus - XBee3 Micro (U.FL) User manual
-
Digi BL4S200 User manual
-
