Signcomplex SC-SSE041028-128-WW-24 Installation guide

Brand
Signcomplex
Model
SC-SSE041028-128-WW-24
Category
Strip lights
Type
Installation guide

Signcomplex SC-SSE041028-128-WW-24 is an ultra-narrow neon light with a dimension of 4x10mm, suitable for tight spaces. It emits a soft, uniform light without visible dots, even at close range. With high flexibility and plasticity, it can be easily bent and shaped to fit various applications. The product is waterproof and has passed CE and RoHS certifications, ensuring safe usage. The SC-SSE041028-128-WW-24 finds wide use in decorative and direct/indirect lighting for hotels, shopping malls, furniture, cabinets, and bookshelves.

Signcomplex SC-SSE041028-128-WW-24 is an ultra-narrow neon light with a dimension of 4x10mm, suitable for tight spaces. It emits a soft, uniform light without visible dots, even at close range. With high flexibility and plasticity, it can be easily bent and shaped to fit various applications. The product is waterproof and has passed CE and RoHS certifications, ensuring safe usage. The SC-SSE041028-128-WW-24 finds wide use in decorative and direct/indirect lighting for hotels, shopping malls, furniture, cabinets, and bookshelves.

ULTRA-NARROW
NEON
SC-SSE041028-128-WW-24
3
W WW NW R G B
Available colors
RGB
RGB RGBIC
Dimension:4×10mm, suitable for ultra-narrow spaces
Ultra-narrow
4
10.3
+86-755-2760 8650 [email protected] www.signcomplex.com
01
High-end vapor phase silicone, strong weather
resistance, no yellowing, good softness and plasticity.
Good flexibility and plasticity
Various LEDs are available, more uniform luminescence.
No light dot can be seen even in close distance soft
light.
Soft Light
+86-755-2760 8650 [email protected] www.signcomplex.com
02
The product has passed CE, RoHS and other
certifications, good waterproof effect, safer
application.
Waterproof
and safer application
+86-755-2760 8650 [email protected] www.signcomplex.com
03
Widely used in hotels, shopping malls, furniture,
cabinets, bookshelves, as decorative lighting, direct
lighting or indirect lighting.
Application
+86-755-2760 8650 [email protected] www.signcomplex.com
04
Model Wave Length & CCT
Range(for LED only)
Luminous
Flux
(lm/M)
257
299
333
WW 2800-3200K
NW 3800-4500K
W6000-6500K
R620-630nm
G515-530nm
G460-470nm
SC-XX-128-XX-24
\ \
CRI LED Type LED Qty.
(PCS/M)
Rated Watt
(w/m)
DC Voltage
(V)
Max.Length
(M)
Min.Length
(mm) PCB Width IP Beam angle
(degree)
80
2835 128 7.7 24 562.5 665 120
PARAMETER
1000mm
ACCESSORIES
End cap with hole
2pcs/5M
End cap without hole
2pcs/5M
Mounting clip
20pcs/5M
Mounting Channel
optional
+86-755-2760 8650 [email protected] www.signcomplex.com
05
DIMENSIONS (unit: mm)
INSTALLATION DIAGRAM
Installation operation
1. Fix the clip in the place where the neon flex installed,
as shown in Figure 1.
2. Install the neon flex into the clip, the installation is complete, as shown in Figure 2.
Figure 1 Figure 2
16
13
10
6
5000 10
13
4
10.3
10.33
Ø6
10
6
150
+86-755-2760 8650 [email protected] www.signcomplex.com
06
Installation operation
1. Cut along the cutting line with scissors, as shown in Figure 3.
2. The plug will be filled with glue, and put the neon flex into the plug,
the installation is complete, as shown in Figure 4.
3. Cut off the adhesive on the back of the PCB to reveal the welding points, as shown
in Figure 5.
4. Use the soldering iron to solder the wire, as shown in Figure 6.
5. Put the plug encased into the line, and repeat Figure 4 gluing steps, and then insert
the neon flex into the plug, the installation is complete, as shown in Figure 7.
Figure 3
Figure 4
Figure 7
Figure 6
Figure 5
24VDC +
-
+86-755-2760 8650 [email protected] www.signcomplex.com
07
Bending direction and bending radius
Luminous surface
Minimum bending
radius
R≥30
90°
Luminous surface
Luminous surface
Luminous surface
Luminous surface
Luminous surface Luminous surface
Luminous surface
+86-755-2760 8650 [email protected] www.signcomplex.com
08
The LED strip and accessories can't be squeezed or folded.
PCB conductive parts can't be damaged when installation.
Installation must conform to electrical safety standard. The LED strip
can only be installed by professionals.
Ensure power supply transform operating load with transformer.
When install on metal or conductor surface, insulation protection
need to be provided to the contact area.
Observe positive and negative polarity, ensure correct connection to
avoid damaging LED strip.
When installation, please prevent static electricity.
The product need anti-corrosion environment, such as, avoiding
damp, water drop or other adverse elements.
INSTALLATION
REQUIREMENT
Packing box Anti-static bag
LED strip
L
W
H
PACKAGING INFORMATION
LED strip Anti-static bag Packing Box
Part Number Gross Weight per Reel QTY per Carton Size(cm/inch)
Gross Weight
SC-SSE041028-
128-WW-24
0.098KG 50 13.25KG
59cm*32.5cm*21.1cm
23.23"*12.79"*8.3"
+86-755-2760 8650 [email protected] www.signcomplex.com
09
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Signcomplex SC-SSE041028-128-WW-24 Installation guide

Brand
Signcomplex
Model
SC-SSE041028-128-WW-24
Category
Strip lights
Type
Installation guide

Signcomplex SC-SSE041028-128-WW-24 is an ultra-narrow neon light with a dimension of 4x10mm, suitable for tight spaces. It emits a soft, uniform light without visible dots, even at close range. With high flexibility and plasticity, it can be easily bent and shaped to fit various applications. The product is waterproof and has passed CE and RoHS certifications, ensuring safe usage. The SC-SSE041028-128-WW-24 finds wide use in decorative and direct/indirect lighting for hotels, shopping malls, furniture, cabinets, and bookshelves.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents