2. HAVIT LIGHTNING
  3. HCP-602002-L
HCP-602002-L

HAVIT LIGHTNING HCP-602002-L User manual

  • Hello! I am an AI chatbot trained to assist you with the HAVIT LIGHTNING HCP-602002-L User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Product Specications
Model No. HCP-602002-L HCP-603002-L HCP-602002-T HCP-603002-T HCP-602002-X HCP-603002-X
Material Aluminium
Connector Type L-Shape T-Shape X-Shape
Colour Black White Black White Black White
IP Rating IP20
Input Voltage 240v AC
Lamp Base Built in LED
Lamp Wattage 1x 12w 1x 15w 1x 20w
Colour Temp TRI Colour - 3000k, 4000k, 5000k
Lumens 1080lm, 1140lm, 1200lm 1300lm, 1400lm, 1500lm 1800lm, 1900lm, 2000lm
CRI > 80
Wiring Parallel
Dimmable Yes - Triac or 0-1/10v
Warranty 5 Years Replacement*
Contact Details: Warranty Terms & Conditions*
Proline Pendant Connectors Installation Instructions
8/133 Beauchamp Road
Matraville NSW 2036
Australia
Tel: 02 9381 8383
Email: sales@havitcommercial.com.au
Web: www.havitcommercial.com.au
Important Safety Issues:
• This product must be installed by a qualied electrician according to AS/NZS 3000.
• Ensure all electrical mains are disconnected before any installation.
• Modication of this product will void any warranty.
• Havit Commercial does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
• Aluminium and 304SS ttings must not be installed within 2km of any salt water environments.
• This form may be updated at any time due to product improvements, please check online installation form for most current version.
Must be installed by a licensed electrician
L-Shape Dimensions
Additional Information
Steps for Installation for connecting lengths together:
1. Make sure that the electrical circuit is free of voltage (master switch o)
2. Remove end caps from pendant and or connector.
3. Insert Joiners into postions on top and inside aluminium prole and tighten allen screws with tools provided
4. Locate Connector cables on the inside of both ttings
5. Connect cables together, If both cables have same connection, Remove internal piece by pulling gently on end to allow for connection.
6. Slide ttings together and tighten allen screws on other tting.
7. All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
T-Shape Dimensions X-Shape Dimensions
/