BLACK+DECKER BC15BD User guide

Type
User guide
032421
Charge
Engine
Start
Battery
Voltage
Alternator
Check
Battery
Recond
BATTERY CHARGE
BC15BD / BC25BD
QUICK START GUIDE
THIS QUICK START GUIDE IS NOT A SUBSTITUTE FOR THE INSTRUCTION MANUAL.
PLEASE REFER TO THE INSTRUCTION MANUAL AND YOUR VEHICLE’S USER’S MANUAL BEFORE USE.
IF YOU HAVE ANY QUESTIONS, CALL CUSTOMER SERVICE AT 1-877-571-2391
MODE SELECTION
CONTROL PANEL
OVERHEAT
ALARM
BATTERY RECONDITION
INDICATOR
SURROUNDINGS
LOW TEMP
SURROUNDINGS
HIGH TEMP
ALTERNATOR
CHECK
BATTERY
BATTERY RECONDITION
AMP/VOLTS/SEC
INDICATOR
DIGITAL
DISPLAY
Varies according to
selected function
BATTERY CLAMPS/FAULT
BATTERY
CHARGE GAUGE ENGINE
START ICON
© 2021 Baccus Global, LLC. BLACK+DECKER and the BLACK+DECKER Logo are trademarks of Stanley Black & Decker, Inc. or an aliate
thereof and are used under license. All rights reserved.
Press once to start
charging your battery
Shows status and function
info with easy to read Icons
To easily select
desired function
LCD SCREEN
ICON SOLID FLASHING
Unit is fully
charged
Ready to
Jump-start
Alternator
Check
Activated
Engine
Start
Activated
Alternator
Check
Completed
Unit is
charging
Reverse
Polarity
connection
Battery
Recondition
REVERSE POLARITY ALARM
When battery clamps are connected in reverse polarity, an audible alarm (continuous beep) will sound and the LCD screen will display the Reverse
Polarity Indicator icon (please see Instruction Manual for details).
DO NOT activate the unit. If this happens carefully disconnect the clamps and re-connect with the proper polarity. Ensure that the grounded
clamp has a firm and clean connection.
BATTERY CHARGE
Once clamps are correctly connected, press to start charging. NOTE: this unit is a high-frequency smart charger. It will need to sense baseline
voltage in your battery in order to engage charging mode. If it does not sense sucient voltage, it will enter reconditioning mode.
ENGINE START
This unit is equipped with an Engine Start function that delivers concentrated, high amperage charging for a 40-second period to start your vehicle.
This is NOT a jump-starting function. After engaging the unit will display a timer. Once the timer has elapsed, you may try to start your vehicle.
ALTERNATOR CHECK
Press to engage the alternator check process, which is designed to determine the functionality of your vehicle’s internal electrical system. Please
consult Instruction Manual for full details on how to complete this process.
BATTERY RECONDITION
Press to engage a 24-hour battery reconditioning cycle. This cycle will subject your battery to intermittent high-frequency pulses in order to reduce
the eects of corrosion and recondition your battery. This is NOT guaranteed to ensure charging. If your battery does not charge after one
reconditioning cycle, discontinue charging.
Consult the TROUBLESHOOTING section
of your manual for further info.
  • Page 1 1

BLACK+DECKER BC15BD User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI