80V STRING TRIMMER
Depending on the model purchased, packaging will contain
different accessories and parts.
Refer to the package for more details.
KNOW YOUR MACHINE 1
1. Battery release
button
2. Rear handle
3. Lock-out button
4. Trigger
5. Speed switch
6. Upper shaft
7. Auxiliary handle
8. Coupler
9. Lower shaft
10. Motor housing
11. Trimmer head
12. Cut-off blade
13. Guard
Attach the edge guide
INSTALLATION
P0804566-00 Rev B
Start the machine
Canada
www.greenworkstools.ca
USA
www.greenworkstools.com
Europe
www.greenworkstools.eu
Attach the guard
Attach the auxiliary handle Install the battery
OPERATION
Quick Start Guide
23
456
4
1
2
3
5
6
7
8
9
10
12
11
13
1
2
Low speed
High speed
Operation tips
Keep a firm hold with
both hands on the machine.
Cut tall grass
from the top down.
MAINTENANCE
Install the cutting line
78910
11 12 13 14
Spool
cover
Bump
head
Slots
Push and rotate the bump head to align the slots as below.
Hole
3.5 m
(11.48 ft.)
= 2/2.4 mm
(0.08/0.095 in.)
New bump head
New spool
MAINTENANCE
Replace the spool and bump head
Adjust the length of the cutting line Adjust the cutting diameter (14”-16”)
14in.(35.6cm)
16in.(40.6cm)
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
EGO ST1500E User manual
-
Ryobi PLT-3043YA Owner's Operation Manual
-
Craftsman 74544 - 12 in. Electric Line Trimmer Owner's manual
-
Kobalt KOC 0140-06 Operating instructions
-
Rockwell RS8020 User manual
-
-
Toro Flex-Force Power System 11in or 13in 60V MAX String Trimmer User manual
-
Challenge Xtreme SGT26N Original Instructions Manual
-
Simplicity STRING TRIMMER, 48 V, SNP User manual
-
