2. Greenworks Pro
  3. 2101102VT

Greenworks Pro 2101102VT User guide

  • Hello! I have analyzed the user manual for the 80V String Trimmer. The document covers all the basics, from installation and setup to operation and basic maintenance. I'm ready to answer any questions you have about the device or the instructions in the manual.
  • How do I attach the guard?
    How do I start the machine?
    What size is the cutting line for this trimmer?
80V STRING TRIMMER
Depending on the model purchased, packaging will contain
different accessories and parts.
Refer to the package for more details.
KNOW YOUR MACHINE 1
1. Battery release
button
2. Rear handle
3. Lock-out button
4. Trigger
5. Speed switch
6. Upper shaft
7. Auxiliary handle
8. Coupler
9. Lower shaft
10. Motor housing
11. Trimmer head
12. Cut-off blade
13. Guard
Attach the edge guide
INSTALLATION
P0804566-00 Rev B
Start the machine
Canada
www.greenworkstools.ca
USA
www.greenworkstools.com
Europe
www.greenworkstools.eu
Attach the guard
Attach the auxiliary handle Install the battery
OPERATION
Quick Start Guide
23
456
4
1
2
3
5
6
7
8
9
10
12
11
13
1
2
Low speed
High speed
Operation tips
Keep a firm hold with
both hands on the machine.
Cut tall grass
from the top down.
MAINTENANCE
Install the cutting line
78910
11 12 13 14
Spool
cover
Bump
head
Slots
Push and rotate the bump head to align the slots as below.
Hole
3.5 m
(11.48 ft.)
= 2/2.4 mm
(0.08/0.095 in.)
New bump head
New spool
MAINTENANCE
Replace the spool and bump head
Adjust the length of the cutting line Adjust the cutting diameter (14”-16”)
14in.(35.6cm)
16in.(40.6cm)
/