2. Home
  3. Home security & automation
  4. Motion detectors
  5. Abus
  6. BW8030

Abus BW8030 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Abus BW8030 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the detection range of the Abus BW8030 motion detector?
    What is the viewing angle of the Abus BW8030 motion detector?
    What type of sensors does the Abus BW8030 motion detector use?
    Is the Abus BW8030 motion detector immune to animals?
    What is the power consumption of the Abus BW8030 motion detector?
    What is the voltage supply for the Abus BW8030 motion detector?
    What is the temperature range for the Abus BW8030 motion detector?
    Does the Abus BW8030 motion detector have an alarm memory?
    Is the Abus BW8030 motion detector VdS-certified?
ABUS Security-Center
BW8030
Xevox Duplex MW VdS motion detector
Product highlights:
• PIR and microwave element
• VdS-certified
• Alarm memory and first-sensor recognition
• Detection range: 15 x 15m
• Aperture angle: 90°, ideal for corner mounting
The Xevox Duplex MW VdS motion detector is a motion sensor with
one PIR and one microwave sensor. An alarm is not triggered until
both sensors register movement.
The combination of passive infrared (PIR) and microwave (MW)
ensures very high protection against false alarms. The reason: An
alarm is not triggered until both sensors – which use technically
different detection methods – register movement. Whereas the PIR
sensor reacts to moving heat, the microwave sensor actively
monitors the surroundings for movement (similar to radar). The
transmission frequency is 9.35 GHz.
The best place to install the sensor is in a corner, between 2 and 3
metres above the floor. The intruder’s possible direction of
movement should be at right-angles to the sensor.
The viewing angle of the Xevox Duplex MW VdS motion detector
sensor is 90 degrees, and the detection range – depending on
installation height – up to 15 x 15 metres. You can vary its sensitivity
by means of a jumper. In this way, you can define the number of
pulses that have to be detected before the sensor opens the alarm
relay.
The Xevox Duplex MW VdS motion detector sensor has an alarm
memory. If the alarm centre is disarmed following an alarm, the LED on the sensor that triggered the alarm lights up. Depending on the
configuration, you can also see which sensor first triggered the alarm. Due to its reliability and high quality, the Xevox Duplex MW VdS
motion detector sensor is VdS-certified.
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
ABUS Security-Center
BW8030
Xevox Duplex MW VdS motion detector
Technical Data
Installation Wall
Detection method PIR / MW
Detection range (m) 15 x 15
Alarm memory Yes
Immune to animals No
Power consumption 13 mA
Voltage supply 9 -16 V
Alarm contact NC, 100 mA, 24 V DC
Tamper contact NC, 100 mA, 24 V DC
Temperature range -10° to 55 °C
VdS G106509
VSÖ GS-N060614/05E
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
/