Abus BW8030 Datasheet

Abus
Brand
Abus
Model
BW8030
Category
Motion detectors
Type
Datasheet

Abus BW8030 is a motion detector that combines PIR and microwave sensors for reliable intrusion detection. Its dual technology minimizes false alarms and provides a detection range of up to 15 x 15 meters. Ideal for corner mounting, it has a 90-degree viewing angle. You can adjust its sensitivity to your needs. The alarm memory helps you identify which sensor triggered an alarm. VdS-certified for reliability and quality, it operates between -10°C and 55°C.

Abus BW8030 is a motion detector that combines PIR and microwave sensors for reliable intrusion detection. Its dual technology minimizes false alarms and provides a detection range of up to 15 x 15 meters. Ideal for corner mounting, it has a 90-degree viewing angle. You can adjust its sensitivity to your needs. The alarm memory helps you identify which sensor triggered an alarm. VdS-certified for reliability and quality, it operates between -10°C and 55°C.

ABUS Security-Center
BW8030
Xevox Duplex MW VdS motion detector
Product highlights:
• PIR and microwave element
• VdS-certified
• Alarm memory and first-sensor recognition
• Detection range: 15 x 15m
• Aperture angle: 90°, ideal for corner mounting
The Xevox Duplex MW VdS motion detector is a motion sensor with
one PIR and one microwave sensor. An alarm is not triggered until
both sensors register movement.
The combination of passive infrared (PIR) and microwave (MW)
ensures very high protection against false alarms. The reason: An
alarm is not triggered until both sensors – which use technically
different detection methods – register movement. Whereas the PIR
sensor reacts to moving heat, the microwave sensor actively
monitors the surroundings for movement (similar to radar). The
transmission frequency is 9.35 GHz.
The best place to install the sensor is in a corner, between 2 and 3
metres above the floor. The intruder’s possible direction of
movement should be at right-angles to the sensor.
The viewing angle of the Xevox Duplex MW VdS motion detector
sensor is 90 degrees, and the detection range – depending on
installation height – up to 15 x 15 metres. You can vary its sensitivity
by means of a jumper. In this way, you can define the number of
pulses that have to be detected before the sensor opens the alarm
relay.
The Xevox Duplex MW VdS motion detector sensor has an alarm
memory. If the alarm centre is disarmed following an alarm, the LED on the sensor that triggered the alarm lights up. Depending on the
configuration, you can also see which sensor first triggered the alarm. Due to its reliability and high quality, the Xevox Duplex MW VdS
motion detector sensor is VdS-certified.
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
ABUS Security-Center
BW8030
Xevox Duplex MW VdS motion detector
Technical Data
Installation Wall
Detection method PIR / MW
Detection range (m) 15 x 15
Alarm memory Yes
Immune to animals No
Power consumption 13 mA
Voltage supply 9 -16 V
Alarm contact NC, 100 mA, 24 V DC
Tamper contact NC, 100 mA, 24 V DC
Temperature range -10° to 55 °C
VdS G106509
VSÖ GS-N060614/05E
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
  • Page 1 1
  • Page 2 2

Abus BW8030 Datasheet

Abus
Brand
Abus
Model
BW8030
Category
Motion detectors
Type
Datasheet

Abus BW8030 is a motion detector that combines PIR and microwave sensors for reliable intrusion detection. Its dual technology minimizes false alarms and provides a detection range of up to 15 x 15 meters. Ideal for corner mounting, it has a 90-degree viewing angle. You can adjust its sensitivity to your needs. The alarm memory helps you identify which sensor triggered an alarm. VdS-certified for reliability and quality, it operates between -10°C and 55°C.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents