CDM 7
F l o o r -standing loudspeaker system
Product Summary
●
The CDM 7 is an imposing floorstander which not only makes the best of the real wood
veneer finish, but also means extra volume. The 165mm Kevlar® mid/bass combined with
the additional 165mm Cobex® low-frequency driver, delivers a bass response as tactile as
the beautifully crafted cabinets themselves.
Technical highlights
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
D e s c r i p t i o n
Drive Units
F requency Response
S e n s i t i v i t y
Nominal Impedance
3-way 4th-order vented-box system
1 x 25mm (1in) alloy dome - high
f re q u e n c y
1 x 165mm (6.5in) kevlar® -
b a s s / m i d r a n g e
1 x 165mm (6.5in) Cobex bass
40Hz - 20kHz ± 3dB on re f e rence axis
90dB spl (2.83V 1m)
8 ohms (minimum 4 ohms)
Power Handling
D i m e n s i o n s
N e t We i g h t
F i n i s h
30 - 150W into 8 ohms on unclipped
p rogramme
Height: 950mm Width: 220mm
Depth: 290mm
1 8 . 5 k g
Cabinet: Real Wod Veneers, Black Ash,
C h e rry, Red Ash
Grille: Black Cloth
Kevlar®: B&W developed and patented the method of using Kevlar® for
loudspeaker cones to reduce unwanted standing waves. DuPont originally
created Kevlar® for use in bulletproof vests.
●
B&W's Tweeter on top technology ensures that the sound remains focused
and time-sensitive and that the stereo image is presented with unparalleled
three dimensional accuracy.
/
