Brodit 654712 Datasheet

Hello! I am an AI chatbot trained to assist you with the Brodit 654712 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Product 654712

654712 ProClip

Angled mount

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for

your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is

car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required

and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

EAN: 7320286547123

Item no 654712 fits:

Volkswagen Beetle 12-15 (For all countries)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read all of the instructions and look at the pictures before attaching the ProClip.

1. Use the enclosed alcohol-pad to clean the area where the ProClip is to be installed. Press the thin end of the

enclosed gap opener into the gap between the center console panel frame and the console edge, to widen the

gap. Peel off the cover of adhesive tape on the ProClip. Press the angled edge on the right side of the ProClip

into the gap below the gap opener. Pull out the gap opener.

2. Press the gap opener into the gap in the console sidewall. Press forward on the left side of the ProClip face

plate so the ProClip flexes forward and the angled edge hooks into the gap next to the gap opener. Pull out the

gap opener.

3. Press the left part of the ProClip firmly toward the console so the angled edge goes all the way into the gap.

4. The ProClip is in place.

2(2)