2. Computers & electronics
  3. Computer components
  4. System components
  5. Memory modules
  6. Dataram
  7. GRL667FB/16GB

Dataram GRL667FB/16GB, GRL667FB/4GB, GRL667FB/8GB, GRL667FBQ/16GB Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Dataram GRL667FB/16GB Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GRL667FB
DDR2-667, PC2-5300, Fully Buffered, ECC, 1.8V, 240-pin DIMMs
GRL667FB 27-Mar-09
Products in Family
GRL667FB/4GB (2 x 2GB 2R DIMMs)
GRL667FB/8GB (2 x 4GB 2R DIMMs)
GRL667FB/16GB (2 x 8GB 2R DIMMs)
GRL667FBQ/16GB (2 x 8GB 4R DIMMs)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 5.3 Gigabytes/sec
Operating Voltage: VDD = 1.8 V ±0.1; VCC = 1.5V ±0.1
Full DIMM Heat Spreader
Fully RoHS Compliant
Each GRL667FB upgrade consists of a matched set of
two DDR2-667 FB-DIMMs. One Advanced Memory
Buffer (AMB) is used as the interface between the system
memory bus and DIMM DRAMs. One 2K-bit EEPROM is
used for Serial Presence Detect. For improved thermal
performance, a Full DIMM Heat Spreader with thermal
interface material (TIM) is attached to the front and back
of the DIMM.
Dataram Product Dell Product Supported in these Dell systems:
GRL667FB/4GB
GRL667FB/8GB
GRL667FB/16GB
GRL667FBQ/16GB
A2026995, A2026998, A2026999,
A2027000, A2027005, A2027060,
A2027065, A2027066, A2027068,
A2027070, A2027072, A2027074
A2146192, A2257178, A2257179,
A2257180, A2257181, A2257182,
A2257183, A2257184, A2257185,
A2257232, A2257233
A2146205, A2257216, A2257217,
A2257245, A2257246, A2257247
Dell PowerEdge 1900, 1950, 1950 III, 1955, 2900, 2900
III, 2950, 2950 III, M600, R900
Dell Precision 490, 690, R5400, T5400, T7400
Front view
Notes
Copyright © 2009 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
30.00
[1.181]
47.00
[1.850]
71.00
[2.795]
5.00
[0.197]
5.125
[0.204]
123.00
[4.843]
133.35
[5.250]
Back view
Tolerances on all dimensions
except where otherwise
indicated are ±.13 (.005).
All dimensions are expressed
in millimeters [inches]
9.50
[0.374]
17.30
[0.681]
2.50
[0.098]
Side view
7.493 Max
[0.295] Max
1.27 ±.10
[0.0500 ±0.0040]
4.00 Min
[0.157] Min
w/heatspreader
/