Page is loading ...
18in Upward Right Angle SATA Cable with LP4 Adapter
StarTech ID: SATA18POWRAU
This 18in 'upward' right angle SATA cable features an upward right-angled (90°) combination SATA data and
power connector, that breaks out into one LP4 power (male) connector and one SATA female data connector -
allowing you to connect a Serial ATA drive to a power supply that may not offer a SATA power connector, as
well as to the motherboard SATA controller.
The data segment of the cable uses the 7-pin SATA architecture to keep the cable ultra-thin, narrow and
flexible, giving you more room and better airflow inside your case. The keyed contacts of the Serial ATA
connector prevent broken or bent pins and allow a firmly seated connection with minimal pressure.
Designed and constructed to provide a dependable and convenient SATA connection, the right angled Serial
ATA Data Cable is backed by StarTech.com's Lifetime Warranty.
Applications
ATA Drive Arrays
Compatible with all Serial ATA Hard Drives
For use in servers and storage subsystems
Mini tower computers
Features
Designed to meet/exceed SATA standards
Molded 90° connector
Supports data transfers of up to 6 Gbps
Compliant with Serial ATA III Specifications
www.startech.com
1 800 265 1844
Technical Specifications
Warranty Lifetime
Cable Jacket Type PVC - Polyvinyl Chloride
Connector A 1 - LP4 (4 pin; Molex Large Drive Power) Male
Connector A 1 - SATA (7 pin; Data) Receptacle
Connector B 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Type and Rate SATA III (6 Gbps)
Color Red
Connector Style Right Angled
Cable Length 18 in [457.2 mm]
Shipping (Package) Weight 0.1 lb [0 kg]
Included in Package 1 - Right upward angled SATA Cable with LP4 adapter
Certifications, Reports and Compatibility
www.startech.com
1 800 265 1844
/
