Euro-35
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
Table of Contents
Control Door Assembly .......................................................................................................................... 2
Phase 6 OPL Microprocessor Control Panel Assembly ........................................................................... 3
Phase 6 OPL Microprocessor Control Box Assembly ............................................................................. 4
Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 5
Coin Vault Assembly ............................................................................................................................... 6
Dual Timer Control Panel Assembly ........................................................................................................ 7
Coin and Dual Timer Control Box Assembly ............................................................................................ 8
Front Panel Assembly ............................................................................................................................. 9
Main Door “Steel” Assembly ................................................................................................................ 10
Main Door Switch Assembly ................................................................................................................. 11
Basket (Tumbler)/Support Assemblies ................................................................................................... 12
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. as of August 10, 2000 ......................................................................................... 13
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. prior to August 10, 2000 ..................................................................................... 14
Idler Bearing Assembly ......................................................................................................................... 15
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of January 7, 2000 .................................................................................... 16, 17
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to January 7, 2000 ................................................................................ 18, 19
Non-Reversing T.E.F.C. Motor Mount Assembly ............................................................................ 20, 21
Reversing T.E.F.C. Motor Mount Assembly .................................................................................... 22, 23
Sensor Bracket Assemblies ............................................................................................................. 24, 25
Hot Surface Ignition (HSI) Burner Assembly ................................................................................... 26, 27
Electric Oven Assembly .................................................................................................................. 28, 29
Electric Oven Component Application Chart ......................................................................................... 30
Sail Switch Assembly ............................................................................................................................ 31
Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 32
3-Phase (3ø) Motor, Electric Relay Panel Assembly .............................................................................. 33
Reversing Electric Relay Panel Assembly ......................................................................................... 34, 35
Air Operated Steam Damper Assembly........................................................................................... 36, 37
Outer Top/Back Guard Assemblies ....................................................................................................... 38
Microprocessor Coin Acceptors Listing ................................................................................................ 39
Additional Parts Available ..................................................................................................................... 40
2
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Control Door Assembly
Illus. No. Part No. Qty. Description
1 160015 1 High Security MK-100 Lock Assembly with Key
(for coin models Only)
160017 1 Special Dummy Lock ONLY
(for non-coin models Only)
160104 1 MK-100 Key ONLY
2 160052 1 Lock Cam ONLY
3 112367 1 Euro Logo with Tape
4 882751 1 White High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
882749 1 Coral Blue High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
882761 1 Ivory High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
5 117603 4 Noise Suppressor Tape (sold by the foot)
6 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 102603 1 Control Door Rod Support Catch
8 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
9 102502 1 Control Door Support Rod
10 102601 1 Control Door Rod Retainer Clip
3
Telephone: (508) 678-9000 Fax: (508) 678-9447
Phase 6 OPL Microprocessor Control Panel Assembly
Illus. No. Part No. Qty. Description
1 112537 1 Phase 6 OPL Keyboard
112276 1 OPL Stick-On Labels
(English Only)...Not Illustrated
112275 1 3-Language OPL Stick-On Labels
(Spanish, Italian, and Hebrew)...Not Illustrated
112277 1 3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew)...Not Illustrated
112278 1 5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese)...Not Illustrated
2 881745 1 Phase 6 Microprocessor Controller (computer) Panel ONLY
881747 1 Phase 6 OPL Non-Reversing Computer Panel Assembly Complete
(includes illus. nos. 1 through 5 and 7 through 9)
881746 1 Phase 6 OPL Reversing Computer Panel Assembly Complete
(includes illus. nos. 1 through 5 and 7 through 9)
3 137123 1 Phase 6 OPL Non-Reversing Microprocessor Controller (computer) ONLY
137122 1 Phase 6 OPL Reversing Microprocessor Controller (computer) ONLY
4 150005 3 #6-32 x 3/4” Phillips Round Head Machine Screw
5 153010 3 #6 Star Washer
6 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 136048 1 1/8-Amp (slo blo) Fuse
8 136017 1 3.15-Amp (fast acting) Fuse
9 136019 1 1-Amp (fast acting) Fuse
4
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty. Description
1 122648 1 4-Pin Connector
2 122646 1 2-Pin Connector
3 122640 1 9-Pin Connector
4 122644 1 6-Pin Terminal
5 122706 * Socket Terminal ONLY
-- 122801 1 Pin/Socket Extraction Tool
* As needed.
Phase 6 OPL Microprocessor Control Box Assembly
5
Telephone: (508) 678-9000 Fax: (508) 678-9447
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No. Part No. Qty. Description
1 112526 1 Coin Keyboard Label Assembly
2 801213 1 Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, and 6)
801229 1 Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 5, and 6)
801259 1 Coin Control Panel ONLY
801258 1 Coin Control Panel ONLY with Battery Bracket
3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 137213 1 Phase 5 Coin Controller ONLY
824998 1 Phase 5 Battery Clip
5 153010 2 #6 Star Washer
6 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
7 -------- 1 Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 39)
8 -------- 1 Optic Switch ONLY
(refer to Microprocessor Coin Acceptors Listing on page 39)
9 137023 1 Optic Switch Connector ONLY
10 137021 3 Microprocessor Socket ONLY
880772 1 Single Coin Optical Switch Harness
122800 1 Microprocessor (female) Pin Extraction Tool
11 136048 1 1/8-Amp (slo blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).
6
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty. Description
1 802112 1 Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
802117 1 Microprocessor Coin Vault ONLY
2 160028 1 Cam for 1/4 Turn Lock ONLY
3 875061 1 1/4 Turn Lock with Key and Cam
160105* 1 1/4 Turn Mer-Pel Key ONLY
4 802020 1 1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 5)
802019 1 1/4 Turn Coin Box ONLY without Faceplate
125915 1 High Security (Greenwald) Coin Box ONLY with Key
5 802018 1 1/4 Turn Coin Box Faceplate ONLY
6 152014 4 1/4-20 Free Spin Wash Nut
7 102502 1 Control Door Support Rod
8 102601 1 Control Door Rod Retainer Clip
9 102603 1 Control Door Rod Support Catch
* Specify key number when ordering.
Coin Vault Assembly
7
Telephone: (508) 678-9000 Fax: (508) 678-9447
Dual Timer Control Panel Assembly
Illus. No. Part No. Qty. Description
1 123005 1 Red Indicator Light - 24 VAC
2 122400 1 Rocker Heat Selector Switch
3 818051 1 Non-Reversing Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 16)
--------* 1 Reversing Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 17)
850456 1 Dual Timer Control Panel ONLY
4 131917 1 Push-to-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2” Round Head Machine Screw
6 154001 2 #10-24 Speed Nut
7 152000 2 #6-32 Hex Nut
8 153010 2 #6 Star Washer
9 120730 1 30-Position Terminal Block
10 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
11 131932 1 Dual Timer Relay - 24 VAC
12 151000 2 #6-32 Pal Nut
13 112050 1 Dual Timer Label ONLY
14 124103 2 Arrow Timer Knob
15 124025 1 60-Minute Timer - 24 VAC
16 124030 1 15-Minute Timer - 24 VAC
17 132198 1 Reversing Timer - 24 VAC (reversing models Only)
* Not available at time of printing. Contact factory for information.
8
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Coin and Dual Timer Control Box Assembly
Illus. No. Part No. Qty. Description
1 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
2 131931 1 Heat Relay - 24 VAC
(for dual timer models Only)
3 122641 1 15-Pin Microprocessor Controller (computer) Connector
4 122706 * Socket Terminal ONLY
-- 122801 1 Pin/Socket Extraction Tool
5 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
6 132198 1 Reversing Timer 24v
(for reversing dual timer models Only)
* As required.
9
Telephone: (508) 678-9000 Fax: (508) 678-9447
Front Panel Assembly
Illus. No. Part No. Qty. Description
1 882905 1 White Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
882901 1 Coral Blue Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
882902 1 Ivory Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
2 150313 11 #10-16 x 1/2” TORX Plus BTN Type 1
150318 1 25 IP TORX Plus Bit 1/4 Hex (for removal of TORX head screw)
3 -------- 1 Main Door Hinge
(refer to Main Door “Steel” Assembly on page 10)
4 -------- 1 Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assemblies on page 13)
5 881987 1 Friction Door Latch
(includes illus. nos. 5 and 6)
6 154215 2 5/32” Pop Rivet
10
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Main Door “Steel” Assembly
Illus. No. Part No. Qty. Description
1 881150 1 Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
2 102354 1 Door Gasket
170730 1 Clear Glass Adhesive (10.3 oz. cartridge)
170731 1 Black Glass Adhesive (10.3 oz. cartridge)
3 881152 1 Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
5 153031 1 1/4” Nylon Washer
6 881151 1 Black Bottom Hinge Block Assembly
(includes illus. nos. 5, 6, and 7)
7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
9 152014 3 1/2-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
11 150120 1 Door Latch Screw
12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
13 152014 3 1/2-20 Free Spin Wash Nut
14 881210 1 Black Main Door Handle ONLY
15 102211 1 20-7/16” Door Glass
102218 1 20-7/16” Door Glass with 4 Holes
(for models mfd. between February 2, 2001 and September 6, 2001)
170730 1 Clear Glass Adhesive (10.3 oz. cartridge)
170731 1 Black Glass Adhesive (10.3 oz. cartridge)
11
Telephone: (508) 678-9000 Fax: (508) 678-9447
Main Door Switch Assembly
Illus. No. Part No. Qty. Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Door Switch
5 122636 2 Flag Terminal
6 881211 1 Black Main Door Switch Housing ONLY
881153 1 Black Main Door Switch Housing Complete
(includes illus. nos. 1, 2, 3, 4, and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
12
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler)/Support Assemblies
Illus. No. Part No. Qty. Description
1* 800708 1 Basket (tumbler) ONLY without Felt Collar
800734 1 Stainless Steel Basket (tumbler) ONLY without Felt Collar
800816 1 Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
800873 1 Stainless Steel Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
2 150413 40 #10-16 x 1/2” TORX Head Crimptite Screw
150429 1 TORX Hand Driver
(for removal of TORX head screw)
3 301308 4 Basket (tumbler) Rib ONLY
301423 4 Stainless Steel Basket (tumbler) Rib ONLY
4 150500 1 5/16-18 x 3/4” Socket Button Head Screw
5 100905 4 3/8-16 x 37” Tie Rod
6 153004 4 3/8” Flat Washer
7 800613 1 Basket (tumbler) Support ONLY
8 152005 4 3/8-16 Hex Nut
9 153005 4 3/8” Lock Washer
10 153004 4 3/8” Flat Washer
11 116000 1 Felt Collar ONLY
--- 401010 1 #847 Adhesive For Felt Collar
* Felt collar is not included and must be ordered separately.
13
Telephone: (508) 678-9000 Fax: (508) 678-9447
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. as of August 10, 2000
Illus. No. Part No. Qty. Description
1 883155 1 White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
883156 1 Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
883157 1 Ivory Lint Drawer Assembly
(includes illus. nos. 1 and 2)
2 117605 5 Gasket (sold by the foot)
3 122116 1 Lint Drawer Switch
4 122605 1 or 2 4-Pin Socket Connector ONLY
5 122701 * Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool
6 883229 1 Lint Drawer Switch Box Assembly (for coin models Only)
(includes illus. nos. 4 through 7)
818087 1 Lint Drawer Switch Box Assembly (for OPL models Only)
(includes illus. nos. 4 through 7)
304136 1 Lint Drawer Switch Box ONLY
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
8 122700 * Pin Terminal ONLY
9 122604 1 or 2 4-Pin Connector ONLY
* As required.
14
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. prior to August 10, 2000
Illus. No. Part No. Qty. Description
1 882514 1 White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
882515 1 Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
882516 1 Almond B Lint Drawer Assembly
(includes illus. nos. 1 and 2)
2 117605 5 Neoprene Sponge tape (sold by the foot)
3 108224 1 Lint Screen Assembly
4 122116 1 Lint Drawer Switch
5 122605 1 or 2 4-Pin Socket Connector
6 122701 * Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool
7 883229 1 Lint Drawer Switch Box Assembly
(includes illus. nos. 4 through 7)
(for coins models Only)
818087 1 Lint Drawer Switch Box Assembly
(includes illus. nos. 4 through 7)
(for OPL models Only)
304136 1 Lint Drawer Switch Box ONLY
8 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
9 122700 * Pin Terminal ONLY
10 122604 1 or 2 4-Pin Connector ONLY
* As required.
15
Telephone: (508) 678-9000 Fax: (508) 678-9447
Idler Bearing Assembly
Illus. No. Part No. Qty. Description
1 100106 1 5L-690 V-Belt (basket [tumbler] to idler)
2 101140 1 14” x 3” Compound Pulley
3 100194 1 4L-720 V-Belt (idler to motor)
For Non-Reversing Models ONLY
100109 1 4L-650 V-Belt (idler to motor)
For Reversing Models ONLY
4 154301 2 5/16-18 x 1” Allen Setscrew
5 100705 1 3/16” x 3/16” x 1-3/8” Key
6 882576 1 Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
7 150617 2 3/8-16 x 1” Hex Head Machine Bolt
8 153005 2 3/8” Lock Washer
9 153004 2 3/8” Flat Washer
10 801009 1 Idler Square Washer
11 152004 1 5/16-18 Hex Nut
12 150509 1 5/16-18 x 3” Hex Head Machine Bolt
16
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of January 7, 2000
17
Telephone: (508) 678-9000 Fax: (508) 678-9447
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of January 7, 2000
Illus. No. Part No. Qty. Description
1 880220 1 1-3/4” Flange Bearing
2 153025 4 9/16” Lock Washer
3 152050 4 9/16-12 Hex Nut
4 882544 1 Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 17, 23, and 24)
882545 1 Pillow Block Bearing Assembly Complete with Rotational Sensor
(includes illus. nos. 4 through 18, 23, and 24)
882542 1 Pillow Block Bearing Platform ONLY
882543 1 Pillow Block Bearing Platform ONLY
(for models with rotational sensor)
5 880202 1 1-3/8” Pillow Block Bearing
880779 1 1-3/8” Pillow Block Bearing
(for reversing models Only)
6 150601 2 3/8-16 x 2” Hex Bolt
7 153004 2 3/8” Flat Washer
8 153004 2 3/8” Flat Washer
9 153005 2 3/8” Lock Washer
10 152005 2 3/8-16 Hex Nut
11 154326 2 5/16-24 x 3/8” Setscrew
12 152004 2 5/16-18 Hex Nut
13 150621 2 5/16-18 x 1-1/2” Tap Bolt
14 153002 4 5/16” Lock Washer
15 153004 6 3/8” Flat Washer
16 150501 4 5/16-18 x 3/4” Tap Bolt
17 102120 1 Sintered 8 Magnet
(for reversing models Only)
18 824807 1 Rotational Sensor Assembly
19 100724 1 Shaft Key
(for non-reversing models mfd. as of July 9, 2001)
100713 1 Shaft Key
(for non-reversing models mfd. prior to July 9, 2001)
100735 1 Shaft Key
(for reversing models Only)
20 101100 1 18” Pulley
(for non-reversing models Only)
101118 1 18-3/4” Pulley
(for reversing models Only)
21 101110 1 1” Taper Lock Bushing
(for reversing models Only)
22 100106 1 5L-660 V-Belt (basket [tumbler] to idler)
23 150610 2 5/16-18 x 1-1/2 Allen Setscrew
24 152004 2 5/16-18 Hex Nut
18
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to January 7, 2000
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/