1-6
Rear Head Restraint Removal
To remove the rear head restraints, do the following:
1. Press the release button located under the right
rear side of the head restraint.
2. Lift the head restraint upward.
3. Secure the head restraints in the trunk using
the tie-down straps located on each side of the
trunk floor.
To reinstall the rear head restraints, do the following:
1. Remove the head restraints from the trunk.
2. Press and hold the release button on the seatback
while inserting the head restraint.
3. Push the head restraint down. After releasing the
button, pull on the head restraint to make sure it is
locked in place.
Rear Folding Seatback (If Equipped)
You can fold either side of the seatback down in
your vehicle for more cargo space. On vehicles with a
built
-in child restraint system, only the driver’s side rear
passenger seatback can be folded down. Make sure the
front seatback isn’t reclined. If it is, the rear seatback
won’t fold down all the way.
CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted won’t provide the
protection needed in a crash. The person wearing
the belt could be seriously injured. After raising
the rear seatback, always check to be sure that
the safety belts are properly routed and attached,
and are not twisted.