Lefroy Brooks CB-1103 (BL1228) Installation guide

Type
Installation guide

This manual is also suitable for

INSTALLATION INSTRUCTIONS
C1-1103 (LB1228)
CROSS HANDLE MACKINTOSH 3-HOLE BASIN MIXER WITH POP-UP WASTE
CW-1103 (WL1228)
WHITE LEVER MACKINTOSH 3-HOLE BASIN MIXER WITH POP-UP WASTE
CB-1103 (BL1228)
BLACK LEVER MACKINTOSH 3-HOLE BASIN MIXER WITH POP-UP WASTE
CW-1103 (WL1228) CB-1103 (BL1228) C1-1103 (LB1228)
2
Dimensions in Inches (& Millimetres)
Whilst every effort is made to ensure accuracy, design and dimensions are subject to
change without notice as part of the company’s product development process.
C1-1103 (LB1228)
6 5/16”
3 1/2”
1/16”~1 11/16”
1/2-14NPSM-2A
3 9/16”
9/16-24UNEF-2A
G1/2
1/16”~1 11/16”
2 15/16”
4”
(101.1mm)
(75mm)
(91mm)
(1~43mm) (88.6mm)
(160mm)
(1mm~43mm)
8”
1 1/2”~2”
1/2”
2 1/8”
1 1/2-18UNEF
12”Max
1 1/4”
(12.7mm)
(54mm)
(305mmMax)
(31.75mm)
(38.1mm~50.8mm)
(203mm)
1’
(26mm)
2 3/16”
(55mm)
5 1/2”
(140mm)
Dimensions in Inches (& Millimetres)
Whilst every effort is made to ensure accuracy, design and dimensions are subject to
change without notice as part of the company’s product development process.
CW-1103 (WL1228)
3
3 5/16” 6 5/16”
1/16”~1 11/16”
2 7/8”1/16”~1 11/16”
1/2-14NPSM-2M
G1/2
9/16-24UNEF-2A
3 9/16”
2 15/16”
4”
(101.1mm)
(75mm)
(91mm)
(1mm~43mm) (72.7mm)
(1mm~43mm)
(160mm)(84mm)
8”
1 1/2”~2”
1/2”
2 1/8”
1 1/2-18UNEF
12”Max
1 1/4”
(12.7mm)
(54mm)
(305mmMax)
(31.75mm)
(38.1mm~50.8mm)
(203mm)
1”
5 1/2”
2 3/16”
(55mm)
(140mm)
(26mm)
4
Dimensions in Inches (& Millimetres)
Whilst every effort is made to ensure accuracy, design and dimensions are subject to
change without notice as part of the company’s product development process.
CB-1103 (BL1228)
3 5/16”
6 5/16”
2 7/8”
4”
1/16”~1 11/16”
9/16-24UNEF-2A
2-G1/2
1/2-14NPSM
4”
(101mm)
(1mm~43mm)
(1mm~43mm)
(101.1mm) (72.7mm)
1/16”~1 11/16”
(84mm) (160mm)
8”
1 1/2”~2”
1/2”
2 1/8”
1 1/2-18UNEF
12”Max
1 1/4”
(12.7mm)
(54mm)
(305mmMax)
(31.75mm)
(38.1mm~50.8mm)
(203mm)
1”
5 1/2”
2 3/16”
(55mm)
(140mm)
(26mm)
5
Standards Flow Rate
Please note :
Final achievable flow rate is dependent on the outlets fitted, see relevant outlets (spouts, roses, sprays) for fully
assembled product flow rate.
IAPMO/cUPC Listed
Meets NSF 61-9
Meets A112.18.1
0
1.2
1.4
20 40 60 80PSI
Please note:
When there is a difference in water pressure between
hot and cold supplies to the mixing valve, the pressures
should by equalized by a plumber in accordance with
best practice and legislation.
What you need to know
Prior to beginning installation. turn off the cold and
hot water lines and open the old faucet to release
built-up pressure.
Overtightening nuts may cause damage.
Wrap all threaded connections with pipe tape
available at your local plumbing supply store.
Always wrap in a clockwise direction. The fittings
should be installed by a state-licenced plumber.
Adjustable Wrench
Groove Joint Pliers
Hacksaw
Phillips Screwdriver
Pipe Tape
Spatula
Spirit Level
Your new bathroom faucet is designed for years
of trouble-free performance.
Keep it looking new by cleaning it periodically with
a soft cloth. Avoid abrasive cleaners, wire wool and
harsh chemicals as these will dull the finish and
void your warranty.
If you are soldering during faucet installation,
remove cartridges, seats, gaskets and washers
prior to applying flame, otherwise you will void
the warranty.
Cover drain openings to avoid losing small parts.
When cutting or soldering pipe, use safety glasses
to protect your eyes.
Correct installation may vary depending on previous faucet installation. All necessary supplies required for
faucet installation are not included, but may be found where plumbing supplies are sold. It is suggested that
IAPMO and/or CSA approved plumbing supplies are used during installation.
Tools: Maintenance
Safety Tips
Things You May Need
Important Points
6
Steps 1-2
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
1
2
Install the Hot and Cold side-body and
handle assembly.
Fix the spout.
1 2
Cold
Hot
7
Steps 3-4
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
3
4
Install the Pop-Up Waste.
Install the hose.
3 4
8
Steps 5
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
5
After installing faucet, open the hot and
cold supplies to check for leaks. Turn on
faucet handle for one minute to flush debris
from faucet. Turn off the handle.
5
Warning! When installing flexible hose, please notice:
1. There should be no torsion or deformation
2. Do not fold into a V or L shape.
3. Do not use if there is any crack or deformation.
9
Parts List
Exploded View
C1-1103 (LB1228)
1 Ceramic cap (129312C)
2 Set screw (292598)
3 Handle (029721)
4 O-ring (048085)
5 Canopy (018220)
6 Clip (012242)
7 Stem extension (110461)
8 Cartridge (507907W)
9 Escutcheon (215486)
10 O-ring (004627)
11 Oil-seal (010017)
12 Washer (013158)
13 Nut (009834)
14 Body (061893W)
15 Ceramic cap (129312-50)
16 Pop-up knob (124408)
17 O-ring (048027N)
18 Spout (002252W)
19 O-ring (004072N)
20 O-ring (004001N)
21 Brass tube (043412N)
22 O-ring (004043N)
23 Connection tube (014016W)
24 O-ring (004115N)
25 O-ring (004005N)
26 Washer (060041)
27 Washer (013202)
28 Nut (009009)
29 Connector (015001W)
30 Nut (009002)
31 Oil-seal (010095N)
32 Aerator insert (553648N)
33 Aerator housing (305800N-50)
34 Pop-up rod (125412)
35 Adaptor (077125)
36 Pop-up rod (110041)
37 Ceramic cap (129312H)
38 Flexible hose (105750W)
39 Pop-up sub-assembly (556781)
40 Coupling nut (504003)
41 Allen key (031000)
42 Wrench (031025)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
10
Parts List
Exploded View
CW-1103 (WL1228)
1 Screw (017094)
2 Lever cap (109376)
3 Handle sleeve (108924)
4 O-ring (048085)
5 Washer (013224)
6 Clip (012242)
7 Stem extension (110461)
8 Screw (008744)
9 Cartridge ( C ) (507176W)
10 Escutcheon (215486)
11 O-ring (004627)
12 Oil-seal (010017)
13 Washer (013158)
14 Nut (009834)
15 Body (061893W)
16 Ceramic cap (129313C)
17 Ceramic cap (129312-50)
18 Pop-up knob (124408)
19 Lever seat (205144)
20 O-ring (048027N)
21 Canopy (018220)
22 Spout (002252W)
23 O-ring (004072N)
24 O-ring (004001N)
25 Brass tube (043412N)
26 O-ring (004043N)
27 Connection tube (014016W)
28 O-ring (004115N)
29 O-ring (004005N)
30 Nut (009009)
31 Nut (009002)
32 Connector (015001W)
33 Washer (013202)
34 Washer (060041)
35 Pop-up rod (110041)
36 Adaptor (077125)
37 Aerator housing (305800N-50)
38 Aerator insert (553648N)
39 Oil-seal (010095N)
40 Ceramic cap (129313H)
41 Cartridge ( H ) (507175W)
42 Pop-up rod (125412)
43 Flexible hose (105750W)
44 Pop-up sub-assembly (556781)
45 Coupling nut (504003)
46 Allen key (031000)
47 Wrench (031025)
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
47
46
45
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
11
Parts List
Exploded View
CB-1103 (BL1228)
1 Handle sleeve (108924)
2 Screw (017094)
3 Lever cap (109376)
4 Washer (013224)
5 Clip (012242)
6 Stem extension (110461)
7 Screw (008486)
8 O-ring (048085)
9 Cartridge ( C ) (507176W)
10 Escutcheon (215486)
11 O-ring (004627)
12 Oil-seal (010017)
13 Washer (013158)
14 Nut (009834)
15 Body (061893W)
16 Connector (015001W)
17 O-ring (004115N)
18 Connection tube (014016W)
19 O-ring (004043N)
20 Brass tube (043412N)
21 O-ring (004001N)
22 O-ring (004072N)
23 Canopy (018220)
24 O-ring (048027N)
25 Lever seat ( C ) (205143C)
26 Pop-up knob (124409)
27 Lever seat ( H ) (205143H)
28 Cartridge ( H ) (507175W)
29 Spout (002252W)
30 Oil-seal (010095N)
31 Aerator insert (553648N)
32 Aerator housing (305800N-50)
33 Pop-up rod (125412)
34 Adaptor (077125)
35 O-ring (004005N)
36 Washer (060041)
37 Washer (013202)
38 Nut (009009)
39 Nut (009002)
40 Flexible hose (105750W)
41 Pop-up rod (110041)
42 Pop-up sub-assembly (556781)
43 Coupling nut (504003)
44 Allen key (031000)
45 Wrench (031025)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
21
20
19
18
17
16
23
22
26
25
24
38
39
36
37
35
34
32
33
30
31
28
29
27
43
44
41
42
40
45
For additional assistance or service call
718-302-5292
9am to 5pm EST Monday to Friday
LEFROY BROOKS INC, 1828 TROUTMAN STREET, RIDGEWOOD, NY, 11385
TELEPHONE: 718-302-5292. FAX: 718-302-4177
The use of trademarks, product design and artwork is subject to licence or agreement with LBIP Ltd. The design
registrations, trademark registrations and copyrights are protected by law and the use or reproduction outside the terms of an agreement is prohibited.
The right to modify designs and dimensions is reserved. Christo Lefroy Brooks is a member of ACID (Anti Copying in Design).
© LBIP LTD 2012
www.lefroybrooks.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Lefroy Brooks CB-1103 (BL1228) Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI