Dynaudio Stand4 Assembly Instructions

Brand: Dynaudio

Model: Stand4

Type: Assembly Instructions

Dynaudio Stand4 is designed to provide exceptional support and acoustic performance for Dynaudio Contour S 1.4 and Confidence C1 loudspeakers. By securely attaching the loudspeaker to the stand, it creates a stable and rigid foundation that minimizes vibrations and ensures optimal sound reproduction. The Stand4 features a sturdy column design that can be filled with damping material to further reduce resonance and improve sound clarity. The base plate layers and adjustable spikes provide a stable and level platform for the loudspeaker, ensuring proper alignment and optimal sound dispersion.

Stand

Dynaudio Contour S 1.4 / Confidence C1

Sales & Marketing

Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone +49 - 4108 - 4180 - 0

0406. All text and image copyrights reserved. Subject to change without notice.

Assembly instructions

The compact Contour and Confidence models are designed to offer exceptional performan-

ce while taking up minimal space. The Contour S 1.4 and the Confidence C1 are intended

for use with the Dynaudio Stand

and offer a direct connection to the stand’s post via the

included bolts. Acoustically this serves as a great advantage while offering the most ele-

gant appearance.

Please take note of the instructions below in order to achieve a firm and solid assembly.

1. Ensure the drivers are protected with the original speaker grille.

2. Place the loudspeaker cabinet upside down on a clean, even surface. Normal floor

carpeting is ideal and helps to avoid surface damage to the cabinet.

3. Screw the thread-end (as supplied with the loudspeakers) into the threaded holes of

the cabinet’s black plinth.

4. Screw one column onto the thread-end and tighten by hand.

5. Screw the second column onto the other thread-end and tighten by hand.

6. At this stage, the columns can optionally be filled with damping material (sand, etc.).

7. Place the three base plate layers on top of the columns and align the holes.

8. Using the Allen bolts supplied with the Stand

, attach the base plates to both

columns.

9. Attach the spike-assembly to the four base plate nuts.

10. Carefully turn the completed assembly around and position on the floor. Please note

that the combined stand/loudspeaker is now quite heavy and unevenly balanced,

due to the cabinet weight.

Ensure the spikes will not cause any damage.

The loudspeaker cabinet is now firmly attached to the Stand

We wish you many years of enjoyment listening to music!

See step 1 to 3

See step 4

See step 7 to 9

Same instructions

apply for Contour S 1.4

Confidence C1See step 5

Dynaudio Stand4 Assembly Instructions

Dynaudio Stand4 Assembly Instructions

Dynaudio Stand4 Assembly Instructions

Related papers