Gigabyte G-MAX FB Install Manual

Brand: Gigabyte

Model: G-MAX FB

Type: Install Manual

This manual is also suitable for

FB series

GIGABYTE FB Series Quick Insatllation Guide / GIGABYTE FB

GIGABYTE FB

Thank you for purchasing and adopting the GIGABYTE FB Series as your favorite

computer product. To assure the safe application of this product, please carefully read

the following:

♦ Strictly follow the labeled warnings and instructions given.

♦ Before disassembling or cleaning this product, make sure the power connector is

unplugged.

♦ Never wipe the interior of the system with water or dip the system in water.

♦ Before connecting to any peripheral, please turn off the power of the system.

♦ The type of power should be used according to the power specified on the label of

this product. If you are not sure what type of power supply should be used, contact

your distributor.

For Users in the USA

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of FCC Rules. These rules are

designed to provide reasonable protection against harmful interference

when the equipment is operated in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy, and if not installed and used in

accordance with the installation, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, you are encouraged to try to

correct the interference by one or more of the following measures:

♦ Reorient the receiving antenna.

♦ Increase the separation between the equipment and receiver.

♦ Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

♦ Consult the dealer or an experienced radio/TV technician for help.

Notes:

 Unauthorized changes or modifications may void the user’s right to operate the

equipment.

 Only equipment certified to comply with Class B (computer input/output devices,

terminals, printers, etc.) should be attached to this equipment and all such equip-

ment must be connected with shielded interface cable.

December/2004

GIGABYTE FB Series Quick Installation Guide / GIGABYTE FB

GIGABYTE FB

n Specifications/ /

• Book size chassis/ /

• Gigabyte Micro or Flex ATX

motherboard (Option)/

• Power supply/ /

• DVD-ROM / CD-ROM / CD-RW

(Option)/DVD-ROM / CD-ROM / CD-

RW / DVD-ROM / CD-ROM /

CD-RW

• Card Reader (Option)/

• 1.44-MB floppy/ MB /

• Power cord/ /

• Keyboard (Option)/ /

• Multi I/O card (Option)/

• Front decorative panel/ /

n Accessory Box Content/

• Motherboard User's Manual/

• System Installation Guide/

• Driver CD/ /

• HDD Cable/ /HDD

• Screwbag/ /

• Mouse (Option)/ /

• Foot Stand (option)/ /

•

GIGABYTE FB Series Quick Insatllation Guide / GIGABYTE FB

GIGABYTE FB

n Chassis/ /

Dimensions: 430 (D) mm x 92 (W) mm x 326 (H) mm

The casing of this computer adopts UL certified materials and bases with the convenient

design of saving space and screws for installing two 5.25-inch and three 3.5-inch storage

devices. It is very easy to remove the upper casing by loosening one screw and removing the

lower panel and upper casing with one movement for the purpose of attaining an easy and

convenient maintenance. The design of the computer casing allows for the function of

electromagnetic interference (EMI) control, and meets the requirements of the computer safety

specifications.

n Motherboard/ /

Refer to the Motherboard User's Guide for the specifications and related introduction of the

motherboard equipment in this system.

n Power Supply/ /

This computer adopts a T.F.X. power supply, and supports the functions of turning off the

system by software. The factory default voltage is 230V.

 Confirm the default voltage of the country before turning on the computer.

GIGABYTE FB Series Quick Installation Guide / GIGABYTE FB

GIGABYTE FB



 Items included in the package/ /

Software and Manuals/

Ⱇ㋥⎟༇Ҫ/࠰ࡈ࠻࠙ࠚࠕߣࡑ࠾ࡘࠕ࡞

Cables/࿣ℭ/

ࠤ࡯ࡉ࡞

Foot Stand/⌴ಛ/

ࡈ࠶࠻ࠬ࠲ࡦ࠼

*Mouse (Option)/

*ᝲ㔱!(ⴇᮣ*/!

*ࡑ࠙ࠬ㧔ࠝࡊ࡚ࠪࡦ㧕

*Keyboard (Option)/

*⼬Ჸ!)ⴇᮣ*/

*ࠠ࡯ࡏ࡯࠼ࠝࡊ࡚ࠪࡦ

Power Cord/テ᜻ℭ/㔚Ḯࠦ࡯࠼

P C

 Specifications marked with “Option” are subject to change without notice.

ᐼ⥇ᣆȶⴇᮣȷ≜ʡ⣴ጂ␶ሸ⩑ሪඵʄס⠘ⳈᵨȰ!

!!!ޟࠝࡊ࡚ࠪࡦޠߢࡑ࡯ࠢߐࠇߚ઀᭽ߪޔ዁᧪੍๔ߥߒߦᄌᦝߔࠆߎߣ߇޽ࠅ߹ߔޕ

GIGABYTE FB Series Quick Insatllation Guide / GIGABYTE FB

GIGABYTE FB

Installing the System/ /

Installing the Hard Disk Drive/ /

1. Remove the screw from the rear casing, and slide the upper casing toward the front panel as

shown.

2. After loosening the 3 front screws and pulling out the optical disk drive, loosen the

screws of the hard disk drive rack and then remove the hard disk drive rack.

3. Put the hard disk drive into the rack, and align the screws at the screw holes.

Remove/

Pull and lift the optical

disk drive rack./

Loosen the screws, and

remove the hard disk drive

rack.

GIGABYTE FB Series Quick Installation Guide / GIGABYTE FB

GIGABYTE FB

Installing the CPU/ /

The FB Series accommodates two types of CPU and heatsinks, depending upon which

motherboard is installed.

 If you need to set up the frequency of the CPU, please do so in the BIOS SETUP. Refer to

the Motherboard User's Manual for the setup.

Type A (Intel Pentium

4 LGA775 CPU)

A (Intel Pentium

4 LGA775 CPU)

A(Intel Pentium

4 LGA775 CPU)

1. Unhook the CPU socket lever from the socket as shown

by the arrows.

CPU CPU

CPU

2. Rotate the security cover and lever up.

3. There is a gold triangle located at one corner of the

CPU. Align the indented corner of the CPU with the

triangle and gently insert the CPU into the socket in

a straight and downwards motion. Avoid twisting

or bending the CPU while inserting it; otherwise,

you may damage the CPU.

CPU

Gold triangle/

GIGABYTE FB Series Quick Insatllation Guide / GIGABYTE FB

GIGABYTE FB

4. Lower the security cover and return the CPU socket lever to its original position.

5. Spread heat dispersal paste evenly on the top of the CPU.

6. Pull the pins up on the heatsink as shown.

7. Place the heatsink over the CPU and insert the heatsink pegs

into the motherboard. After the pegs are inserted, rotate them

clockwise to lock them in place.

8. Plug the heatsink fan power cable into the CPU fan power

connector on the motherboard.

GIGABYTE FB Series Quick Installation Guide / GIGABYTE FB

GIGABYTE FB

Type B (Intel Pentium

4 Socket 478 CPU)/

B (Intel Pentium

4 Socket 478 CPU)/

B (Intel Pentium

4 Socket 478 CPU)

1. Raise the CPU socket lever as shown by the arrows.

2. Place the CPU into the CPU socket, aligning the pin 1 of the CPU

with pin 1 of the socket.

3. Lower the CPU socket lever to secure the CPU.

4. Apply heat dispersion paste evenly to the top of the CPU.

5. Place the heatsink on the CPU and secure it with the locking

levers.

6. Plug the heatsink fan power cable into the CPU fan power

connector on the motherboard.

CPU

GIGABYTE FB Series Quick Insatllation Guide / GIGABYTE FB

GIGABYTE FB

Installing Memory/ /

When installing the memory, align the notch on the bottom with the memory

slot on the motherboard. For successful installation, the hooks on both sides must be latched

completely into the grooves.

Notch/ /

Hooks/ /

Grooves on both sides/ /

DDR Memory/

DDR /

DDR

GIGABYTE FB Series Quick Installation Guide / GIGABYTE FB

GIGABYTE FB

Power Supply Socket/

IDE Hard Disk Drive/IDE /

IDE

Connect to hard

disk drive/

2. Connect the connector of the power supply to the power supply socket of the hard disk drive.

3. After the above steps are completed, reinstall the hard disk drive rack back to the casing

and tighten the screws.

SATA Hard Disk Drive/SATA /

SATA

Tighten the screws on the hard

disk drive rack./

Connecting Cables/ /

 The FB series accommodates two types of

hard disk drive: SATA or IDE.

FB SATA IDE

GIGABYTE FB Series Quick Insatllation Guide / GIGABYTE FB

GIGABYTE FB

4. Connect the other end of the IDE bus cable to the data bus slot labeled as IDE-1 on the

motherboard. Connect the other end of the SATA cable to the SATA-1 connector.

IDE IDE-1

SATA SATA-1

IDE IDE-1

SATA SATA-1

5. Reinstall the optical disk drive back into position on the casing, and tighten the screws.

6. Reconfirm that all connections are properly made.

7. Install the upper casing and tighten the screws back into place.

Connect to the data bus slot labeled as IDE-1

on the motherboard./

IDE-1

Connect to the data bus slot labeled as

SATA-1 on the motherboard.

SATA-1

GIGABYTE FB Series Quick Installation Guide / GIGABYTE FB

GIGABYTE FB

CD-ROM Tray/

CD-ROM

Power Button/

HDD LED/

USB Ports/

CD-ROM Tray/

CD-ROM

Power Button/

HDD LED/

LED

USB Ports/

USB

*CF/MD

*SM

*USB

*Card Reader LED/

* LED /

* LED

*MS/MS PRO

*SD/MMC

* Items are factory optional./



 Front Panel Components/ /

FB Series Components/FB /FB

CD-ROM Eject Button/

CD-ROM

Audio Output/

CD-ROM Eject Button/

CD-ROM

Power LED/

LED

Audio Output/

*IEEE1394 Port/

*IEEE1394 /

*IEEE1394

Power LED/

MIC Port/

*SPDIF Port/

*SPDIF /

*SPDIF

MIC Port/

GIGABYTE FB Series Quick Insatllation Guide / GIGABYTE FB

GIGABYTE FB

Power Socket/ /

SPDIF in/SPDIF /SPDIF

USB Ports/USB /USB

Keyboard Port (PS/2)/ (PS/2)/

(PS/2)

SPDIF out/SPDIF /SPDIF

VGA Port/VGA

MIC In/ /

Side speaker out/ /

*IEEE1394 Ports/*IEEE1394 /

*IEEE1394

Center/Subwoofer speaker out/

Rear speaker out/ /

Audio In/ /

Audio Out (Front Speaker Out)/

LAN Port/

LAN /

LAN

LPT Port/LPT /

LPT

Mouse Port (PS/2)/

(PS/2)/ (PS/2)

Voltage Switch/ /

Version 3.0/3.0 / 3.0

* Items are factory optional.

USB Ports/

USB

Voltage Switch/

VGA

Voltage Switch/

VGA



 Rear Panel Components/ /

Version 1.0/1.0 / 1.0

Version 2.0/2.0 / 2.0

*IEEE1394 Ports/

*IEEE1394 /

*IEEE1394

Mouse Port (PS/2)/

(PS/2)/

(PS/2)

Audio Out

Audio In/ /

LAN Port/LAN /

LAN

LPT Port/ /

LPT

MIC In/

USB Ports/

USB

COM Port/ /

COM

Keyboard Port(PS/2)/

(PS/2)

Power Socket/

Audio Out/ /

Audio In

LAN Port/LAN

LAN

LPT Port/ /

LPT

Mouse Port

(PS/2)/

(PS/2)

MIC In/ /

Power Socket/ /

Keyboard Port(PS/2)/

(PS/2)/

(PS/2)

COM Port/COM /

COM

USB Ports/USB /

USB

GIGABYTE FB Series Quick Installation Guide / GIGABYTE FB

GIGABYTE FB

 

 Cautions for Safety/ /

1. There is a risk of explosion if the Lithium battery of the system is not instaleld properly.

Therefore, make sure you are using the same branded battery or equivalent one

recommended by the manufacturer when replacing the batteries. Follow the instructions given

by the manufacturer to handle the disposed batteries.

2. When the users install a modem card on their own, please pay attention to the following:

i. Please avoid using the telephone wire smaller than that of the No. 26 AWG to prevent

fire accidents.

ii.When the modem card is installed or uninstalled, please unplug the telephone line from

the socket.

 

 Remarks/

1. It is recommended to use a high-quality optical disk to avoid the risk of broken disks during the

operation of the high-speed optical disk drive.

2. Some of the items labeled with “*” may be different from the hardware specifications listed in

this manual, and such items are based on the actual shipment.

3. If you want to obtain the most updated information of the drivers, please link to the following

website:

http://www.gigabyte.com.tw/products/plat_index.htm

Gigabyte G-MAX FB Install Manual

Brand: Gigabyte

Model: G-MAX FB

Type: Install Manual

This manual is also suitable for

FB series

Download PDF

report

in other languages

日本語: Gigabyte G-MAX FB

Gigabyte G-MAX FB Install Manual

This manual is also suitable for

Gigabyte G-MAX FB Install Manual

in other languages

Related papers

Other documents