2. Computers & electronics
  3. Data input devices
  4. KVM switches
  5. SYBA
  6. SY-KVM20051
SY-KVM20051

SYBA SY-KVM20051 User guide

  • Hello! I am an AI chatbot trained to assist you with the SYBA SY-KVM20051 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What computers are compatible with SY-KVM20051?
    What is included in the package of SY-KVM20051?
    How do I connect the SY-KVM20051 to my computer?
    How do I connect the SY-KVM20051 to my monitor, keyboard, and mouse?
    How do I select which computer to control with the SY-KVM20051?
    What is the default computer selection when powering on the SY-KVM20051?
    What are the specifications for the SY-KVM20051?
TM
Wired remote
switch
User Guide
SY-KVM20051
Specifications and products are subject to
change without prior notice
All trade name referenced are the registered
trademark of their respective owners
Package Contents
1 SY-KVM20051 2-Port USB Cable KVM Switch with 6 ft (1.8m) Remote
Selection Switch
1 User Guide
Hardware Requirements
Console
· A VGA, SVGA, XGA, SXGA, or multisync monitor
· A USB Keyboard
· A USB Mouse
Computers
The following must be installed on each computer that is connected to the
system:
· A VGA, SVGA, XGA, SXGA, or Multisync video port
· Two USB Type A port
Hardware Review
1. Console Monitor Port
2. Console USB Keyboard / Mouse Port
3. Port LEDs
4. KVM Cables
5. Remote Selection Switch
6. USB Keyboard and Mouse Connectors
7. Video Connector
Hardware Installation
· Before beginning the installation procedure, ensure that all equipment to
be connected is powered o.
· To prevent damage to your installation, make sure that all devices are
properly grounded
1. Plug your keyboard, monitor and mouse into their ports on the
SY-KVM20051. The USB keyboard and USB mouse ports are labeled
with an icon to distinguish them.
2. Plug the USB and video connectors of the attached KVM cables
into their respective ports on the computers you are installing.
3. Position the Remote Switch within reach on your desktop.
4. Turn on the power to the computers.
Note: The SY-KVM20051 power on default is to link to the rst computer
you power on.
Specifications
Function SY-KVM20051
Computer Connections 2
Port Selection Remote Selection Switch
Keyboard 1 x USB Type A Female (Black)
Video 1 x HDB-15 Female (Blue)
Console
Ports
Mouse 1 x USB Type A Female (Black)
Keyboard /
Mouse
2 x USB Type A Male (Black)
Connectors
KVM
Ports
Video 2 x HDB-15 Male (Blue)
LEDs Selected 2
Computers 3 ft (0.9 m) Cable Length
Remote Selection Switch 6 ft (1.8 m)
Video 2048 x 1536, DDC2B
Operating Temp. 32 ~ 122°F (0 ~ 50°C)
Storage Temp. -4 ~ 140°F (-20 ~ 60°C)
Environment
Humidity 0–80% RH, Non-condensing
Housing Plastic
Weight 0.68 lb (0.31 kg)
Physical
Properties
Dimensions
(L x W x H)
0.27 x 0.25 x 0.08 ft
(8.24 X 7.71 X 2.46 cm)
/