Philips 32PFL4737 is a versatile TV that goes beyond watching your favorite shows, with a host of features that let you enjoy photos, music, and videos as well. You can connect your USB devices to the TV and browse through your media files using the remote control. The TV's Smart Picture feature optimizes the viewing experience by adjusting picture settings automatically based on the content being displayed.
Philips 32PFL4737 is a versatile TV that goes beyond watching your favorite shows, with a host of features that let you enjoy photos, music, and videos as well. You can connect your USB devices to the TV and browse through your media files using the remote control. The TV's Smart Picture feature optimizes the viewing experience by adjusting picture settings automatically based on the content being displayed.
Register your product and get support at
www.philips.com/welcome
EN User manual
32PFL4537/V7
32PFL4737/V7
40PFL4757/V7
EN 1
Contents
1 Notice 2
2 Important 3
Use your TV 5
4
Use more of your TV 10
5
Play photos, music and videos
13
7 Product information
17
6 Troubleshooting
15
3
on USB storage devices
Product disposal Guidelines 4
Consumer Guidelines
Warranty
19
20
8
9
2 EN
1 Notice
Pixel characteristics
This LCD/LED product has a high number of
color pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
Warranty
No components are user serviceable Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops.
Failure to do shall void any warranty, stated
or implied.
EN 3
Risk of injury or damage to the TV!
• Two people are required to lift and carry
a TV that weighs more than 25 kg or 55
lbs.
• When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat, level
surface that can support the combined
weight of the TV and the stand.
• When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount.PE Electronics
Ltd. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
• Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
• Ensure that no part of the TV hangs over
the edge of the surface.
• Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
• Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
• The product/remote control may
contain a coin-type battery, which can be
swallowed. Keep the battery out of reach
of children at all times!
Risk of overheating!
• Never install the TV in a confined space.
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
• Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
• Never place the TV, remote control or
batteries near naked flames or other
heat sources, including direct sunlight. To
prevent the spread of fire, keep candles
or other flames away from the TV, remote
control and batteries at all times.
• Never insert objects into the ventilation
slots or other openings on the TV.
• When the TV is swivelled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Risk of short circuit or fire!
• Never expose the remote control or
batteries to rain, water or excessive heat.
• Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
fire.
4 EN
alcohol, chemicals or household cleaners
on the TV.
• Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
• To avoid deformations and colour fading,
wipe off water drops as soon as possible.
Risk of damage to the TV!
• Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Risk of injury, fire or power cord damage!
• Never place the TV or any objects on the
power cord.
• To easily disconnect the TV power cord
from the power outlet, ensure that you
have full access to the power cord at all
times.
• When you disconnect the power cord,
always pull the plug, never the cable.
• Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
• Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
• If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting the
TV to the power outlet.
Screen care
• Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft,
damp cloth. Never use substances such as
Product disposal Guidelines:
Visit-
http://www.philips.com
OR Standard Call Rates Apply-1860 180 1111, Toll Free Number - 1800 102 2929
For the purpose of recycling to facilitate effective utilization of resources, please
return this product to a nearby authorized collection center, registered dismantler,
recycler, service center when disposing of this product.
In case of further assistance, you may contact nearest authorized service center.
Or Please see the Company website for further information on collection centers etc.
Visit-
http://www.philips.com
OR Standard Call Rates Apply-1860 180 1111, Toll Free Number - 1800 102 2929
( )
R
o
H
S
COMPLIANT
2) LED INDICATOR
A) TV controls and Indicators
Congratulations on your purchase, and
welcome to Philips To fully benefit from the
support that Philips offers, register your TV at
www.philips.com/welcome.
3.1 Name and Function of Control on Set
EN 5
3 Use your TV
1) IR SENSOR
3
1
2
4
(32PFL4537/V7 & 32PFL4737/V7)
3) POWER SWITCH
4) KEY BOARD
SOURCE
MENU
CH-/+ STANDBY
VOL-/+
VIDEO L R VIDEO L R
110-240V~ 50/60Hz
AC-INPUT
AV IN AV OUT
different as per model selection.
9) VGA IN
2) AV IN(YPbPr Audio IN)
3) AV OUT
10) RF IN
Note :
1) Above sketch and connectivity are just for representation actual product may look
1) AC POWER IN
5) HDMI
4) USB
6) YPbPr
7) HEADPHONE
8) PC/VGA AUDIO IN
B) Connectivity
3
2
1
10
9
8
7
6
5
4
6 EN
3.2 Name and Function of Control on Set
(40PFL4757/V7)
2) LED INDICATOR
A) TV controls and Indicators
1) IR SENSOR
3
1
2
4
3) POWER SWITCH
4) KEY BOARD
different as per model selection.
9) RF IN
2) AV IN(YPbPr Audio IN)
3) YPbPr
Note :
1) Above sketch and connectivity are just for representation actual product may look
1) AC POWER IN
5) USB
4) HDMI
6)
AV OUT/AV2 IN
7) PC/VGA AUDIO IN
8) VGA IN
B) Connectivity
3
2
1
9
8
7
6
5
4
110-240V~ 50/60Hz
AC-INPUT
Y Pb Pr
VIDEO
L R
AV1
HDMI2
HDMI1
USB
AV OUT/AV2 IN PC AUDIO
VGA
RF
SOURCE
MENU
CH-/+ STANDBY
VOL-/+
11
10
1
2
17
16
12
15
14
13
7
4
5
3
6
9
8
3.3 Name and Function of Control on Remote
EN 7
8 EN
2
3
4
1
Mute or restore audio.
16
17
3.4 Remote control usage
(Standby-On)
• Switches the TV ON or OFF.
Multimedia Control buttons
• Control video or music.
FIND
• Access the Channel Edit.
(Home )
• Access the home menu.
CH - / CH +
(
Previous/Next)
•
Switch channels or navigate through
menu pages, tracks, albums or
folders.
SOURCE
• Selects connected devices.
•
+/-
• Adjust volume.
0-9 Numeric buttons
• Select channels.
SUBTITLE
• Depending on model.
TEXT
• Depending on model.
OPTIONS
• Access options for the current
activity or selection.
• Return to the previous menu or exit
a function.
OK
• Confirm an entry or selection.
(Navigation buttons)
• Navigate through menus and select
items. (Also in USB mode).
ADJUST
• Access the menu to adjust settings.
Color buttons
• Select tasks or options
When you use the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight between
the remote control and TV is not blocked by
furniture, walls or other objects.
5
6
7
8
9
10
11
12
13
14
15
The TV is not powered off completely
unless it is physically unplugged
~5m
~30º
3.5 Battery Installation
3. Refix the battery compartment door.
1. Remove the battery compartment door.
2. Install 2 “AAA” or UM-4 (1.5V) batteries or equivalent with the correct polarity
as indicated.
EN 9
[Setup]
: Access menus to change
picture, sound and other settings.
4.2 Manually adjust picture setting
1
2
3
• [Smart picture]
: Access predefined smart
picture settings.
• [Contrast]
: Adjust the intensity of
backlight areas, while the video contents
are kept unchanged.
• [Brightness]
: Adjust the intensity and
details of dark areas.
•
[Color]
: Adjust color saturation.
•
[Hue]
: Compensate for color variations.
(Available only for NTSC channels).
•
[Sharpness]
: Adjust sharpness in the
image.
10 EN
4 Use more of
your TV
4.1 Main Menu
Menus help you to install channels, change
picture and sound settings and access other
TV features.
1
Press
2 Select one of the following, then press
OK
•
[Watch TV]
: If a source other than
antenna is selected, switch back to
the antenna source
•
• [Device List]
: Access menus to
change other source by pressing key.
•
[Browse USB]:
View photos and
play music and movies contained in
USB storage devices.
Press to move, and press to adjust.
Press .
Select then press OK[Setup]
Select one of the following settings, then
» The menu screen appears.
Watch TV Device List
Browse USB Setup
Picture
Sound
Features
Installation
Smart Picture
Contrast
Brightness
Color
Hue
Sharpness
Digital Crystal Clear +
Format
: Select picture format.
•
[ ]Format
•
[Noise Reduction]: Filter and reduce noise
in an Image, you can switch this feature
•
[Dynamic contrast]
: Enhance
contrast, you can switch this feature
•
[Color enhancement]
: Make
colors more vivid and improve the
details in bright colors. You can
switch this feature ON or OFF.
[Digital Crystal Clear +] :
To enhance the picture quality
•
Picture
Sound
Features
Installation
Dynamic Contrast
Noise Reduction
High
High
Color Enhancement
On
Low,Middle and High.
Low,Middle and High.
> [Picture]Select .
EN 11
2 Select one of the following settings, by
•
[Personal]
: Apply your customised
•
[Vivid]
: Rich and dynamic settings,
ideal for daytime.
[Cinema]
: Ideal settings for movies.
•
[Bright]
: Ideal settings for night time.
•
4.3 Use Smart Picture
Use smart picture to apply pre-defined
picture settings.
picture settings.
1
Press ADJUST.
Smart Picture
Vivid
[Color Temp.]
: Adjust the color balance
in an image.
[Freeze]
: Select option as ON to freeze the
picture.
Note
• Depending on the format of the picture
source, some picture settings may not be available.
•
•
Picture
Sound
Features
Installation
Color Temp.
Freeze
4.4 Manually adjust sound setting
1
Press
.
2
•
[Equalizer]
: Adjust the equalizer ON
various frequencies.
Press to move, and press to adjust.
3 Select one of the following settings, then
• [Smart Sound]
: Access predefined smart
sound settings.
•
•
•
Auto volume leveler
• [AVL] :
automatically reduces sudden
volume changes, for example when
switching channels.
[Bass] :
[Treble] :
[Balance]
: Adjust the balance of the right
and left speakers.
Adjust the bass level.
Adjust the treble level.
Picture
Sound
Features
Installation
Smart Sound
Balance
Treble
Bass
AVL
Equalizer
Incredible Surround
Select then press OK[Setup]
> [Sound]Select .
[Incredible Surround ] :
Enable Incredible Surround for stereo
Sources
•
4.5 Use Smart Sound
Use smart sound to apply pre-defined
Sound settings.
2 Select one of the following settings, by
1
Press ADJUST.
Smart Sound
Standard
• [Standard]
: Settings that suit most
environments and types of audio.
• [Movie]
: Ideal settings for spoken audio,
such as news.
• [Music]
: Ideal settings for listening to music.
• [Personal]
: Apply the settings that were
customised in the sound menu.
[Channel Edit]:
You can Delete, Rename,
Move or Skip any programmes.
•
[Fine Tune]:
You can Fine tune the program,
•
In case poor reception.
12 EN
4.6 Features Menu
1
Press
2 Select [Setup]
>
Select [Features]
then press
OK
3 Select one of the following settings then
Press to move, and press to adjust.
•
[Factory Settings]
:This function is used for
•
[OSD Duration] :This function is used to OSD
timeout in step of 15,30,45,60 secs.
[Features in VGA Mode] :
• [Auto Adjust]:This automatically adjust
H & V-position,Phase and Clock for VGA
mode.
•
[V-Position]:
Adjust the vertical
position of image [Only in VGA].
•
[H-Position]:
Adjust the horizontal
position of image [Only in VGA].
•
[Clock]:Adjust the picture if not in sync
•
with TV screen.
•
[Phase]:Adjust the picture if there is any
•
blurring or shimmer in text.
[Only in VGA].
•
Picture
Sound
Features
Installation
OSD Duration
Blueback
Sleep Time
Factory Settings
•
[Blueback] :This function is used to ON/OFF
the blue screen at no signal condition.
•
[Sleep Time] :This function is used to ON/OFF
step of 10,20,30,60,90,120,180,240 mins.
Reset to factory default settings.
is not reproduced properly.
Note: For India color system is Auto or
PAL.
•
[Sound System]
: Change the sound
•
[Manual ]Search
:Select this for manually
channels.
•
[Auto Search]
:Select the function TV
set will start auto tuning for all available
4.7 Installation Menu
1
Press
.
2
Select [Setup]
> Select
[Installation]
then press
OK
3 Select one of the following settings, then
•
[Color System] : Change the color system
(AUTO/PAL/NTSC) setting if the picture
sound system (BG/M/DK/I) setting if sound
is not reproduced properly.
Note: For India sound system is BG.
searching the channels, select the function
from which tuning will start.
Press to move, and press to adjust.
[Skip]:
This function is used to Skip any
•
program.
EN 13
Program Edit
48.25MHZ
83.25MHZ
105.25MHZ
169.25MHZ
175.25MHZ
203.25MHZ
224.25MHZ
463.25MHZ
545.75MHZ
1
2
3
4
5
6
7
8
9
and press to move the program.
Delete
Select Delete option by Pressing Red color
button,the program will be deleted.
Rename
Move the cursor to the program, Select
Rename option by pressing Green color button
to rename the program. Press to choose
Press to move the cursor.the character.
Press OK button to Enter ,
Press Menu button to Return the Edit Menu.
Move
Move the cursor to the program, Select
Move option by pressing Yellow color button
Skip
Select Skip option by pressing Blue color
button to skip this program.
1
While you watch TV, press
OPTIONS.
The TV options menu appears for
2 Select one of the following options,switch to
ON/OFF by .
• [Freeze ]:
Freeze the moving picture
[ ]:Incredible Surround
4.8 Use the Options menu
Select program no on which you want move
the current program, then press ok key.
2 62.25MHz ----- Off
3 69.25MHz ----- Off
4 76.25MHz ----- Off
5 97.25MHz ----- Off
6 112.25MHz ----- Off
7 119.25MHz ----- Off
8 126.25MHz ----- Off
9 147.25MHz ----- Off
10 161.25MHz ----- Off
1 55.25MHz ----- On
Rename
Freeze
Off
Incredible Surround
Off
Freeze and Incredible Surround by pressing
options key cyclic.
Enable Incredible Surround for stereo
Sources
5 Play photos, music and videos
on USB storage devices
5.1 Connect a USB storage device to play
photos, music or videos stored on it.
1 Switch on the TV.
2 Connect the USB device to the USB port
on the side of your TV.
3 Press
4 Select , then press OK[Browse USB]
The USB browser appears.
5.2 View photos
1 In the USB browser, select , then[Photo]
press OK.
2 Select a photo or a photo album by pressing
5.3 View a slide show of your photos
Press the following buttons to control
play of selected photos.:
•
to play.
• to pause.
•
or to play the previous or next
photo.
5.4 Listen to music
1
In the USB browser, select , then[Music]
press OK.
2 Select a music track or album by pressing
Select photos by pressing OK key :
•
to play.
•
to pause.
•
or to play the previous or next
OK key,then press to view the photo.
OK key.
14 EN
5.5 Watch video
1 In the USB browser, select ,then[Movie]
press OK.
2
3
To control play, press the play buttons:
•
to play/pause.
•
or to play the previous or next
video.
5.6 Text
1 In the USB browser, select , then[Text]
press OK.
2 Select a Text File, then Press to play.
Select video files by pressing OK key.
5.7 Music, Photo, Movie, Text
mode control menu bars
You can select the multimedia functions
like play, Pause, FF, FB, Next, Previous.
Stop etc.
To use above functions press OK key
while playing files on TV screen.
Picture mode menu bar:
Press to select the function icon, press
OK button to confirm the function.
Press to select the function icon, press
OK button to confirm the function.
Text mode menu bar:
5.9 Disconnect a USB storage device
Caution
•
Follow this procedure to avoid damage to your
USB storage device.
1 Press to exit the USB browser.
2 Wait for five seconds, then disconnect
the USB storage device.
Music mode menu bar:
Movie mode menu bar:
Press to select the function icon, press
OK button to confirm the function.
Press to select the function icon, press
OK button to confirm the function.
Step Forward
6.2 TV channel issues
Previously installed channels do not appear in
the channel list:
Check that the correct channel list is
selected.
6.3 Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly
connected to the TV.
Check that the correct device is selected
as the TV source.
There is sound but no picture:
Check that the picture settings are
correctly set.
There is poor TV reception from an antenna
connection:
Check that the antenna is properly
connected to the TV.
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor,
fine tune this channel.
There is poor picture quality from connected
devices:
Check that the devices are connected
properly.
Check that the picture settings are
correctly set.
The TV did not save your picture settings:
Check that the TV location is set to the
home setting. This mode offers you the
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
Try using a different picture format.
The picture position is incorrect:
Picture signals from some devices may
not fit the screen correctly. Check the
signal output of the device.
6 Troubleshooting
This section describes commonly encountered
issues and accompanying solutions.
6.1 General TV issues
The TV does not switch on:
Disconnect the power cable from the power
outlet. Wait for one minute then reconnect it.
Check that the power cable is securely
connected.
The remote control is not working properly:
Check that the remote control batteries
are correctly inserted according to the +/-
orientation.
Replace the remote control batteries if they are
flat or weak.
Clean the remote control and TV sensor lens.
The standby light on the TV blinks red:
Disconnect the power cable from the power
outlet. Wait until the TV cools down before
reconnecting the power cable. If the blinking
reoccurs, contact Philips Consumer Care.
When turning the TV on/off/to standby, you hear a
creaking sound from the TV chassis:
No action is required. The creaking sound is
normal expansion and contraction of the TV as it
cools down and warms up. This does not impact
performance.
EN 15
1. Press
2. Select [Setup] >[Features] >
[Auto Adjust].
6.4 Sound issues
There is a picture but sound quality is poor:
Note
If no audio signal is detected, the TV
automatically switches the audio output off
this does not indicate malfunction.
Check that all cables are properly connected.
Check that the volume is not set to 0.
Check that the sound is not muted.
There is a picture but the sound quality is poor:
Check that the sound settings are correctly
set.
There is a picture but sound comes from one
speaker only:
Verify that sound balance is set to the centre.
6.5 HDMI connection issues
There are problems with HDMI devices:
If the TV does not recognise the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
If there are intermittent sound disruptions,
check that output settings from the HDMI
device are correct.
If you use an HDMI-to-DVI adapter or
HDMI-to-DVI cable, check that an additional
audio cable is connected to AV IN.
6.6 Computer connection issues
The computer display on the TV is not stable:
Check that your PC uses the supported
resolution and refresh rate.
Select the “Auto Adjust” function.
6.7 Contact us
If you cannot resolve your problem, refer to the
FAQs for this product at www.philips.com/support.
or Contact Customer Service Center.
16 EN
Warning
Do not attempt to repair the product yourself.
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Note
Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
EN 17
7.2 Tuner/Reception/
Transmission
Antenna input: 75ohm coaxial (IEC75)
TV system: PAL, B/G
Video playback: NTSC,PAL
Tuner Bands: UHF, VHF
7.3 Remote control
Type: YKF293-001
Batteries: 2 x AAA (LR03 type)
7.5 Power
Mains power: 110-240V, 50Hz-60Hz
Ambient temperature: 5 to 40 degrees
Celsius
Power consumption
7 Product
information
Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.
7.1 Supported display resolutions
Resolution - refresh rate:
640 x 480 - 60Hz,72Hz,75Hz
800 x 600 - 56Hz,60Hz,72Hz,75Hz
1280 x 1024 - 60Hz
Resolution - refresh rate:
720 x 480i - 60Hz
720 x 480p - 60Hz
720 x 576i - 50Hz
720 x 576p - 50Hz
1280 x 720p - 50Hz, 60Hz
1920 x 1080i - 50Hz, 60Hz
Resolution - refresh rate:
Computer formats (HDMI)
Computer formats (VGA)
1024 x768 - 60Hz,70Hz,75Hz
Video Formats
720 x 480p - 60Hz
720 x 576p - 50Hz
1280 x 720p - 50Hz,60Hz
1920 x 1080p -50Hz,60Hz
7.4 Multimedia
Supported USB storage device:
(Only FAT 16 or FAT 32 USB storage
devices are supported)
Supported storage file formats:
Images : JPEG, BMP, PNG
Audio : MP3,WMA.
Note
USB
names must not exceed 128
characters.
file
1)
2) The USB features/functions may vary
from file to file depending on relative
information present in the file
Video :
Text : TEXT
Note
1080p support only for FHD model
1)
32PFL4737/V7: 50W
40PFL4757/V7: 70W
32PFL4537/V7: 50W
18 EN
7.6 Supported TV mounts
To mount the TV, purchase a Philips TV mount
or VESA - compatible TV mount.To Prevent
Warning
Follow all instructions provided with the TV
mount. PE Electronics Ltd. bears no
responsibility for improper TV
mounting that results in accident, injury or
damage.
damage to cables and connectors,be sure to
leave a clearance of at least 2.2 inches or 5.5 cm
from the back of the TV.
With TV stand
Dimension(WxDxH): 749 x 210 x
511(mm)
Weight: 6 kg
Without TV stand
Dimension(WxDxH): 749 x 74.5 x
459 (mm)
Weight: 5.6 kg
TV screen
size (inches)
Required
pitch (mm)
Required
mounting bolts
200 x 100
200 x 100
4 x M4
7.7 Product specification
Design and specifications are subject to change
without notice.
4 x M4
32PFL4537/V7
32PFL4737/V7
32PFL4537/V7 & 32PFL4737/V7
200 x 200
4 x M6
40PFL4757/V7
With TV stand
Dimension(WxDxH): 906 x 250 x
600 (mm)
Weight: 10 kg
Without TV stand
Dimension(WxDxH): 906 x 75 x
548(mm)
Weight: 8.5 kg
40PFL4757/V7
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Philips 32PFL4737 is a versatile TV that goes beyond watching your favorite shows, with a host of features that let you enjoy photos, music, and videos as well. You can connect your USB devices to the TV and browse through your media files using the remote control. The TV's Smart Picture feature optimizes the viewing experience by adjusting picture settings automatically based on the content being displayed.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Philips 32PFL5957 User manual
-
Philips 29PFL5937 User manual
-
Philips 24PFL5237 User manual
-
Philips 42PFL6357 User manual
-
Philips 40PFL4958 User manual
-
Philips 32PFL5637 User manual
-
Philips 22PFL5237/V7 User manual
-
Philips 29PFL4938/V7 User manual
-
-
Philips 24PFL2159 User manual