StarTech.com SATA - Slim Optical IDE Drive Adapter Installation guide

Category
Interface cards/adapters
Type
Installation guide
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. Dur-
ing this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of
the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws
apply, the limitations or exclusions contained in this statement may not apply to you.
OPT2SATA
SATA to Slim Optical IDE Drive Adapter
Installation Guide
Package Contents
1 x OPT2SATA adapter•
2 x Mounting Screws •
System Requirements
Available SATA port•
4-pin FDD power connector (SP4)•
Hardware Installation
Attach the 50-pin connector of the OPT2SATA to the corresponding 50-pin connector on 1.
the rear of the optical drive.
Attach an optional CD Audio cable to either the 4-pin 2.54 pitch CD Audio connector or 2.
the 4-pin 2.0 pitch CD Audio connector on the OPT2SATA.
Attach a SATA cable running from an available SATA port in your computer to the SATA 3.
port on the OPT2SATA.
Attach a 4-pin FDD power cable to the corresponding port on the OPT2SATA. 4.
Specications
Device Interface
50-pin fine-pitch connector
Host Interface
7-pin, SATA data connector
Chipset ID
Jmicron JM20330
Power Input
4-pin, FDD type power
connector
Audio Outputs
4-pin, 2.54mm and 2.0mm
pitch
Dimensions
103.0mm x 12.8m x 9.8mm
Operating Tempera-
ture
0ºC to 60ºC (32ºF to 140ºF)
Humidity
Max. 95 %, non condensing
  • Page 1 1

StarTech.com SATA - Slim Optical IDE Drive Adapter Installation guide

Category
Interface cards/adapters
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI