184-pin 1mm pin spacing
512MB Direct RDRAM storage
Gold plated contacts
RDRAMs use Chip Scale Package (CSP)
Serial Presence Detect support
Operates on 2.5 volt supply (+/- 5%)
Low power and powerdown self-refresh modes
Document No. VALUERAM0242-001.A00 05/08/02 Page 1
Separate Row and Column buses for higher efficiency
DESCRIPTION
FEATURES
Direct Rambus™ RIMM™ Modules
512MB 256M x 16-Bit 800MHz
(Based on 256 Megabit RDRAM 40ns (-40) Components)
Direct Rambus RIMM Module Assembly
KVR800A16-16/512
512MB, 16-Bit non/ECC, 800MHz
Part Numbers Description
Part Number Configuration
Components
256Mb x 16 pcs.
This document describes the ValueRAM by Kingston® 256M x 16-Bit (512MB non/ECC) Direct Rambus RIMM Modules.
The components on these modules include sixteen 40ns 256Mb Direct Rambus DRAM (Direct RDRAM). Direct RDRAM
devices are capable of sustained data transfers at 1.25ns per two bytes (10ns per sixteen bytes). I/O frequency is 800MHz.
See the part number scheme below.
Memory Module Specification
TECHNOLOGY
T
E
C
H
N
O
L
O
G
Y
Heat Spreaders
256Mb x 16-Bit
Direct Rambus RIMM Module
Sixteen 256Mb RDRAM
Components, eight on the front
and eight on the back.