AVM ISDN-Controller B1 PCI v4.0 Owner's manual

ISDN-Controller B1 PCI v4.0
AVM
Brand
AVM
Model
ISDN-Controller B1 PCI v4.0
Category
ISDN access devices
Type
Owner's manual
2 ISDN-Controller B1 PCI v4.0
AVM ISDN-Controller B1 PCI v4.0
This documentation and the software it describes are protected by copyright. AVM grants the
non-exclusive right to use the software, which is supplied exclusively in what is known as ob-
ject code format. The licensee may create only one copy of the software, which may be used ex-
clusively for backup use.
AVM reserves all rights that are not expressly granted to the licensee. Without previous approv-
al in writing, and except for in cases permitted by law, it is particularly prohibited to
copy, propagate or in any other manner make this documentation or this software publicly
accessible, or
process, disassemble, reverse engineer, translate, decompile or in any other manner open
the software and subsequently copy, propagate or make the software publicly accessible in
any other manner.
Please consult the LICENSE.TXT file on the product CD included in the package for specifics
about the licensing conditions.
This documentation and software have been produced with all due care and checked for cor-
rectness in accordance with the best available technology. AVM GmbH disclaims all liability
and warranties, whether express or implied, relating to the AVM product‘s quality, performance
or suitability for any given purpose which deviates from the performance specifications con-
tained in the product description. The licensee bears all risk in regard to hazards and impair-
ments of quality which may arise in connection with the use of this product.
AVM will not be liable for damages arising directly or indirectly from the use of the manual or
the software, nor for incidental or consequential damages, except in case of intent or gross
negligence. AVM expressly disclaims all liability for the loss of or damage to hardware or soft-
ware or data as a result of direct or indirect errors or destruction and for any costs (including
connection charges) related to the documentation and the software and due to incorrect instal-
lations not performed by AVM itself.
The information in this documentation and the software are subject to change without notice
for the purpose of technical improvement.
We offer a manufacturer’s warranty for this original product. The conditions of this warranty are
contained in the WARRANTY.PDF file in the SOFTWARE\INFO folder on the product CD included
with delivery.
© AVM GmbH 2003 - 2011. All rights reserved. Documentation release 02/2011
AVM in the Internet: www.avm.de/en
Trademarks: Unless otherwise indicated, all trademarks mentioned are legally protected trade-
marks owned by AVM GmbH, especially product names and logos. Microsoft, Windows and the
Windows logo are trademarks owned by Microsoft Corporation in the USA and/or other coun-
tries. Bluetooth is a trademark of Bluetooth SIG, Inc. licensed to AVM GmbH. All other product
and company names are trademarks of their respective owners.
AVM Audiovisuelles Marketing
und Computersysteme GmbH
Alt-Moabit 95
AVM Computersysteme
Vertriebs GmbH
Alt-Moabit 95
D 10559 Berlin D 10559 Berlin
ISDN-Controller B1 PCI v4.0 – Table of Contents 3
Table of Contents
1 The AVM ISDN-Controller B1 PCI v4.0 7
1.1 The Driver Software of the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . .8
1.2 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2 Installing the ISDN-Controller B1 PCI v4.0 12
3 Installation in Windows 7 / Server 2008 13
3.1 Installing the Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.2 Changing the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.3 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.4 Removing the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . . . . . . . . . . 15
4 Installation in Windows Vista 16
4.1 Installing the Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.2 Changing the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.3 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.4 Removing the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . . . . . . . . . . 18
5 Installation in Windows XP / Server 2003 19
5.1 Installing the Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.2 Changing the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.3 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.4 Removing the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . . . . . . . . . . 23
6 Installation in Windows 2000 24
6.1 Installing the Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6.2 Changing the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.3 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.4 Removing the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . . . . . . . . . . 28
7 Installation in Windows NT 29
7.1 Installing the Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7.2 Changing the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7.3 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
7.4 Removing the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . . . . . . . . . . 32
4 ISDN-Controller B1 PCI v4.0 – Table of Contents
8 Installation in Windows Me 33
8.1 Installing the Driver Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
8.2 Changing the Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
8.3 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
8.4 Removing the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . . . . . . . . . . 37
9 Installation in Windows 98 38
9.1 Installing the Driver Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
9.2 Changing the Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
9.3 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
9.4 Removing the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . . . . . . . . . . 42
10 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12 43
10.1 Installing the Driver Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
10.2 Configuring the ISDN-Controller B1 PCI v4.0 with
Stand-Alone CAPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
10.3 Operation of the ISDN-Controller B1 PCI v4.0 with
Stand-Alone CAPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
10.4 Operation of the ISDN-Controller B1 PCI v4.0 with
CAPI for the CAPI Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
10.5 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
10.6 Removing the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . . . . . . . . . . 48
11 Installation in Linux 49
11.1 Installation in Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
11.2 Testing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
11.3 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
12 Installation in OS/2 56
12.1 Installing the Driver Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
12.2 Starting Operation of the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . 58
12.3 Changing the Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
12.4 Installing Additional Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
12.5 Removing the ISDN-Controller B1 PCI v4.0 . . . . . . . . . . . . . . . . . . . . 59
13 Special Types of Lines 60
13.1 The ISDN-Controller B1 PCI v4.0 on Point-to-Point Lines . . . . . . . . . 60
13.2 Connecting to an Internal PBX Bus . . . . . . . . . . . . . . . . . . . . . . . . . . 64
ISDN-Controller B1 PCI v4.0 – Table of Contents 5
14 AVM System Architecture 66
14.1 The CAPI 2.0 Application Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 66
14.2 IDM Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
14.3 The AVM System Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
14.4 CAPI SoftCompression X75/V42bis. . . . . . . . . . . . . . . . . . . . . . . . . . 71
14.5 CAPI SoftFax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
15 Technical Specifications 73
15.1 Connector Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
15.2 Features at a Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
15.3 Technical Specifications at a Glance. . . . . . . . . . . . . . . . . . . . . . . . . 75
16 Troubleshooting 76
16.1 General Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
16.2 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
17 Customer Service Guide 82
17.1 Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
17.2 Information in the Internet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
17.3 Updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Index 84
Declaration of CE Conformity 87
6 ISDN-Controller B1 PCI v4.0 – Symbols and Highlighting
Symbols and Highlighting
The following highlighting and icons are used to designate
important information:
Highlighting
The following highlighting is used in this manual.
Symbols
The following icons are used in the manual:
This symbol designates sections which contain important
information.
This symbol indicates useful tips and information.
Highlighting Function Example
Quotation marks Keys, buttons, icons,
tabs, menus, commands
“Start / Programs”
or “Enter”
Capital letters Path and file names in
running text
SOFTWARE\INFO.PDF
or README.DOC
Pointed brackets Variables <CD-ROM drive>
Typewriter font Information to be typed
in using the keyboard
a:\setup
Gray italics Tips, instructions and
warnings
... for more informa-
tion, see ...
The AVM ISDN-Controller B1 PCI v4.0
ISDN-Controller B1 PCI v4.0 – 1 The AVM ISDN-Controller B1 PCI v4.0 7
1The AVM ISDN-Controller B1PCIv4.0
The AVM ISDN-Controller B1 PCI v4.0 is an active ISDN-Con-
troller, which means that the controller is equipped with its
own processor. It processes both B channels of an ISDN ba-
sic rate interface at the same time (2 x 64,000 Bit/s). It
owes this extraordinary power to the Strong T Multitasking
RISC Processor (50 MIPS), which makes this ISDN-Control-
ler the ideal platform for software applications with high
demands on system stability and data throughput. No addi-
tional burdens are placed on the main memory and proces-
sor of your computer by ISDN-based communication tasks.
Computer with AVM ISDN-Controller B1 PCI v4.0
As the above figure shows, the ISDN-Controller is simply
plugged into a free slot on the PCI bus. The ISDN-Controller
is connected to the ISDN line over the S
0
interface on the
controller. This interface is connected to the ISDN line using
the cable included in the product package.
Controller
Software
S
0
Interface
ISDN Telephone,
ISDN Fax or
PBX
The Driver Software of the ISDN-Controller B1 PCI v4.0
8 ISDN-Controller B1 PCI v4.0 – 1 The AVM ISDN-Controller B1 PCI v4.0
1.1 The Driver Software of the ISDN-Controller
B1 PCI v4.0
The driver software takes control of the communications
processes and data transmission.
The driver software is loaded to the ISDN-Controller from
the hard disk. This procedure ensures that the driver soft-
ware can be updated quickly and easily at any time.
The driver software can compress data according to the
V.42bis standard. For more information about automatic
data compression, see the section “CAPI
SoftCompression X75/V42bis” from page 71.
The driver software also supports the analog Fax G3 ser-
vice. For details, see the section “CAPI SoftFax” from
page 72.
CAPI (COMMON-ISDN-API)
The driver software for the ISDN-Controller B1 PCI v4.0 pro-
vides the industry standard CAPI 2.0 applications interface
on your computer. This interface specified by the interna-
tional standardization organization ETSI guarantees the
universal exchangeability of ISDN applications for the use
of data, fax and speech transmission. This interface allows
the ISDN-Controller B1 PCI v4.0 to be used with a wide
range of CAPI 2.0-based ISDN applications.
For more information about CAPI 2.0, see the section “The
CAPI 2.0 Application Interface” from page 66.
Protocols Supported
The driver software supports the international D-channel
protocol DSS1 (Euro ISDN) as well as the national protocols
5ESS, NI1 and 1TR6.
The drivers for the various D-channel protocols are included
in the software package. Current drivers may be download-
ed from the AVM Data Call Center (ADC) or from the Internet.
See the section “Product Documentation” from page 82 for
information about how to reach the ADC or AVM’s Internet
site.
The Driver Software of the ISDN-Controller B1 PCI v4.0
ISDN-Controller B1 PCI v4.0 – 1 The AVM ISDN-Controller B1 PCI v4.0 9
Operating Systems Supported
The driver software for the ISDN-Controller B1 PCI v4.0 is
available for all operating systems for which a CAPI 2.0
standard is defined at the time this manual was printed:
Windows 7 x64, Windows Server 2008, Windows Vista
x64, Windows XP x64, Windows Server 2003 x64
Windows 7 / Vista / XP / Server 2003 / Windows 2000
/ NT / Me / 98 / 95 / 3.x
DOS
NetWare 6.x, 5.x, 4.x and 3.12
OS/2
Linux
The instructions for installing the driver software in
Windows 3.x and DOS is documented in Readme files.
These Readme files are located in the folders CARDWARE\
B1_PCI\WINDOWS.3.XX\<LANGUAGE> and CARDWARE\B1_
PCI\DOS\<LANGUAGE> on the ISDN-Controller B1 PCI v4.0
installation CD.
Applications without CAPI Support
The controller package includes three AVM system drivers:
the AVM ISDN CAPI Port Driver, the AVM NDIS WAN Driver
and the TAPI Services for CAPI. These system drivers allow
you to use CAPI-based ISDN applications alongside
communications programs that do not have built-in CAPI
support. For example, you can use Microsoft’s Dial-Up Net-
working to connect your computer to the Internet or to ac-
cess remote servers.
For detailed information about the AVM system drivers, see
the section “The AVM System Drivers” from page 69.
System Requirements
10 ISDN-Controller B1 PCI v4.0 – 1 The AVM ISDN-Controller B1 PCI v4.0
Combining Multiple ISDN-Controllers
Combining multiple active AVM ISDN-Controllers in one
computer presents no problems. Up to four active AVM
ISDN-Controllers can be operated at the same time. It is al-
so possible to equip the computer with a combination of
B1 ISDN-Controllers for the PCI, ISA and PCMCIA buses and
the USB, or to combine the B1 with the AVM ISDN-
Controller C4 or C2. Such configurations make it simple to
meet growing ISDN communication needs.
Downward Compatibility with the AVM B1 Family
The Multitask RISC processor StrongT developed by AVM
makes the ISDN-Controller B1 PCI v4.0 fully compatible
with all earlier controller versions from the AVM B1 family.
New features such as ECM (Error Correction Mode), support
for new ISDN protocols and new operating systems thus are
generally available for older controllers as well, depending
on the capabilities of the hardware used.
1.2 System Requirements
The following hardware and software requirements must be
met in order to use the ISDN-Controller B1 PCI v4.0:
a computer with a Pentium or Pentium-compatible pro-
cessor (CPU) or higher
operating system Windows 7, Server 2008,
Windows Vista, Server 2003, Windows XP, 2000, NT,
Me, 98, 95, 3.x, DOS, NetWare 6.x, 5.x, 4.x und 3.12,
OS/2 or Linux
CD-ROM drive for installation of the driver software
free PCI slot compliant with specification 2.1 or higher
(5-V slot)
Package Contents
ISDN-Controller B1 PCI v4.0 – 1 The AVM ISDN-Controller B1 PCI v4.0 11
1.3 Package Contents
The package contains:
AVM ISDN-Controller B1 PCI v4.0 (plug-in card for the
PCI bus)
1 ISDN cable (6 m)
“AVM ISDN-Controller B1 PCI v4.0” manual
1 compact disk (CD-ROM) with all installation pro-
grams and the AVM ISDN-Tools
The AVM ISDN-Tools are a collection of ISDN applica-
tions based on CAPI 2.0. They include such programs
as “Connect32” for convenient data transfer in ISDN.
“AVM ISDN-Tools” manual in PDF format in the INFO\
MANUAL folder on the installation CD
Additional CAPI applications may be acquired separately
from your vendor.
Installing the ISDN-Controller B1 PCI v4.0
12 ISDN-Controller B1 PCI v4.0 – 2 Installing the ISDN-Controller B1 PCI v4.0
2 Installing the ISDN-Controller
B1 PCI v4.0
First install the ISDN-Controller B1 PCI v4.0 hardware in the
computer, before you install the driver software.
Proceed as follows to install the ISDN-Controller
B1 PCI v4.0:
1. Switch off your computer and any connected devices.
Disconnect their power supply.
2. Open the cover of the computer. Touch the metal of the
housing to discharge any static electricity.
3. Choose a PCI slot, unscrew and remove the slot blank-
ing plate at the back of the computer, and insert the
ISDN-Controller B1 PCI v4.0 in the slot.
For installation in Novell NetWare: Note the number of
the slot in which you have inserted the ISDN-Controller
B1 PCI v4.0 for subsequent configuration.
4. Screw the back plate of the ISDN-Controller
B1 PCI v4.0 on to the back panel of the computer.
5. Close the computer housing and plug the power cord
back in to the socket.
6. Connect the ISDN-Controller B1 PCI v4.0 to your ISDN
supply. The ISDN cable has an RJ45 plug at each end.
Insert one end into your ISDN NT and the other end in-
to the S
0
socket on the back plate of your ISDN-Con-
troller B1 PCI v4.0.
This completes the hardware installation.
The individual steps taken to install the driver software dif-
fer among the operating systems. Read the section that
describes the driver installation for your operating system.
Installation in Windows 7 / Server 2008
ISDN-Controller B1 PCI v4.0 – 3 Installation in Windows 7 / Server 2008 13
3 Installation in
Windows 7 / Server 2008
The AVM ISDN-Controller B1 PCI v4.0 is shipped with driv-
ers that are especially developed for use in Microsoft
Windows 7, which can also be used in Windows Server
2008. The CAPI 2.0 applications interface supplied sup-
ports both 32-bit and 64-bit applications (Windows 7
x64 Edition). Applications in DOS windows are not support-
ed. Information on CAPI can be found in the section “The
CAPI 2.0 Application Interface” from page 66.
Windows 7 itself includes a version of the driver software
for the ISDN-Controller B1 PCI v4.0. Windows 7 installs this
automatically. Once the automatic installation is complete,
install the current driver software from the installation CD.
US only: In addition to the D-channel protocol, ISDN
users in the USA must find out their SPID.
SPID stands for Service Profile IDentifier. A SPID is a num-
ber assigned by your ISDN service provider to each sub-
scriber interface. SPIDs let the ISDN switch know which
ISDN services a given logical terminal (ISDN device) can
access. This is particularly important for ISDN tele-
phones.
AVM continuously extends the functionality of the driver
software for your ISDN-Controller B1 PCI v4.0. If a more cur-
rent version of the driver software is available, it may be ob-
tained from the ADC under CARDWARE\B1_PCI\
WINDOWS.7\ENGLISH.
3.1 Installing the Driver Software
Once the ISDN-Controller B1 PCI v4.0 has been installed in
your computer, it will be recognized automatically as a Plug
& Play device.
The CAPI 2.0 interface and the AVM NDIS WAN CAPI Driver
are available on your system. For details about the AVM
ISDN NDIS WAN CAPI Driver and the other two AVM system
drivers, see the section “The AVM System Drivers” from
page 69.
Changing the Settings
14 ISDN-Controller B1 PCI v4.0 – 3 Installation in Windows 7 / Server 2008
3.2 Changing the Settings
After installation is concluded, you have the opportunity to
enter or change the MSNs.
1. Open “Start / Control Panel / Hardware and Sound /
Device Manager”.
2. Click the plus sign “+” next to “Network adapters” to
expand the node.
3. Click the entry “AVM ISDN-Controller B1 PCI” with the
right mouse button.
4. Select “Properties” and switch to the “ISDN” tab.
5. Click the “Configure” button. Enter the Multiple Sub-
scriber Number (MSN) for the ISDN NDIS WAN CAPI
Driver.
On the “Advanced” page you can enable support for opera-
tion on a point-to-point connection.
3.3 Installing Additional Controllers
Up to four active AVM ISDN-Controllers can be installed in
your computer.
To install an additional ISDN-Controller for the PCI bus, sim-
ply insert it in a suitable slot as described in “Installing the
ISDN-Controller B1 PCI v4.0” on page 12 and start Win-
dows. Make the entries described in the section “Installing
the Driver Software” on page 13. That’s all!
The driver software for all installed ISDN-Controllers is load-
ed automatically when Windows 7 starts.
Removing the ISDN-Controller B1 PCI v4.0
ISDN-Controller B1 PCI v4.0 – 3 Installation in Windows 7 / Server 2008 15
3.4 Removing the ISDN-Controller B1 PCI v4.0
To uninstall the ISDN-Controller B1 PCI v4.0 in Windows 7,
simply remove the controller. If you would like to uninstall
the driver software as well, proceed as follows:
1. Open “Start / Control Panel / Hardware and Sound /
Device Manager”.
2. Click the plus sign “+” next to “Network adapters” to
expand the node.
3. Click the entry “AVM ISDN-Controller B1 PCI” with the
right mouse button.
4. Select “Uninstall”.
5. Confirm the uninstallation in the following security
prompt. The ISDN-Controller B1 PCI v4.0 is then re-
moved from the system.
Only one ISDN-Controller can be removed at a time. If you
have installed several ISDN-Controllers and want to remove
them all, then perform the procedure described here sever-
al times, without restarting Windows between each opera-
tion.
Installation in Windows Vista
16 ISDN-Controller B1 PCI v4.0 – 4 Installation in Windows Vista
4 Installation in Windows Vista
The AVM ISDN-Controller B1 PCI v4.0 is shipped with driv-
ers that are especially developed for use in Microsoft
Windows Vista. The CAPI 2.0 applications interface sup-
plied supports both 32-bit and 64-bit applications (Vista
x64 Edition). Applications in DOS windows are not support-
ed. Information on CAPI can be found in the section “The
CAPI 2.0 Application Interface” from page 66.
Windows Vista itself includes a version of the driver soft-
ware for the ISDN-Controller B1 PCI v4.0. Windows Vista
installs this automatically. Once the automatic installation
is complete, install the current driver software from the in-
stallation CD.
US only: In addition to the D-channel protocol, ISDN
users in the USA must find out their SPID.
SPID stands for Service Profile IDentifier. A SPID is a num-
ber assigned by your ISDN service provider to each sub-
scriber interface. SPIDs let the ISDN switch know which
ISDN services a given logical terminal (ISDN device) can
access. This is particularly important for ISDN tele-
phones.
AVM continuously extends the functionality of the driver
software for your ISDN-Controller B1 PCI v4.0. If a more cur-
rent version of the driver software is available, it may be ob-
tained from the ADC under CARDWARE\B1_PCI\
WINDOWS.VISTA\ENGLISH.
4.1 Installing the Driver Software
Once the ISDN-Controller B1 PCI v4.0 has been installed in
your computer, it will be recognized automatically as a Plug
& Play device.
The CAPI 2.0 interface and the AVM NDIS WAN CAPI Driver
are available on your system. For details about the AVM
ISDN NDIS WAN CAPI Driver and the other two AVM system
drivers, see the section “The AVM System Drivers” from
page 69.
Changing the Settings
ISDN-Controller B1 PCI v4.0 – 4 Installation in Windows Vista 17
4.2 Changing the Settings
After installation is concluded, you have the opportunity to
enter or change the MSNs.
1. Open “Start / Control Panel / Hardware and Sound /
Device Manager / Show Hardware and Devices”.
2. Confirm the query from the “User Account Control” by
clicking “Continue”.
3. Click the plus sign “+” next to “Network adapters” to
expand the node.
4. Click the entry “AVM ISDN-Controller B1 PCI” with the
right mouse button.
5. Click the “Properties” command and select the “ISDN”
page.
6. On this settings page, click the “Configure” button. En-
ter the Multiple Subscriber Number (MSN) for the ISDN
NDIS WAN CAPI Driver.
If the current driver software from AVM is installed on your
system, the “Device Manager” includes an additional “Ad-
vanced” settings page which allows you to enable Direct
Dial-in.
4.3 Installing Additional Controllers
Up to four active AVM ISDN-Controllers can be installed in
your computer. Active AVM ISDN-Controllers for the PCI,
PCMCIA and USB buses can also be combined in the same
system.
To install an additional ISDN-Controller for the PCI bus, sim-
ply insert it in a suitable slot as described in “Installing the
ISDN-Controller B1 PCI v4.0” on page 12 and start Win-
dows. Make the entries described in the section “Installing
the Driver Software” on page 16. That’s all!
The driver software for all installed ISDN-Controllers is load-
ed automatically when Windows Vista starts.
Removing the ISDN-Controller B1 PCI v4.0
18 ISDN-Controller B1 PCI v4.0 – 4 Installation in Windows Vista
4.4 Removing the ISDN-Controller B1 PCI v4.0
To uninstall the ISDN-Controller B1 PCI v4.0 in
Windows Vista, simply remove the controller. If you would
like to uninstall the driver software as well, proceed as fol-
lows:
1. Open “Start / Control Panel / Hardware and Sound /
Device Manager / Show Hardware and Devices”.
2. Confirm the query from the “User Account Control” by
clicking “Continue”.
3. In the “Network adapters” section of the “Device Man-
ager”, select the “AVM ISDN-Controller B1 PCI” entry.
4. In the “Action” menu, select the “Uninstall” com-
mand.
5. Confirm the uninstallation in the following security
prompt. The ISDN-Controller B1 PCI v4.0 is then re-
moved from the system.
Only one ISDN-Controller can be removed at a time. If you
have installed several ISDN-Controllers and want to remove
them all, then perform the procedure described here sever-
al times, without restarting Windows between each opera-
tion.
Installation in Windows XP / Server 2003
ISDN-Controller B1 PCI v4.0 – 5 Installation in Windows XP / Server 2003 19
5 Installation in Windows XP /
Server 2003
The AVM ISDN-Controller B1 PCI v4.0 is shipped with driv-
ers that are especially developed for use in Microsoft
WindowsXP, which can also be used in Windows
Server 2003. The CAPI 2.0 interface supports both 32-bit
and 64-bit applications (Windows XP/Server 2003
x64 Edition). Information on CAPI can be found in the sec-
tion “The CAPI 2.0 Application Interface” from page 66.
Windows XP itself includes a version of the driver software
for the ISDN-Controller B1 PCI v4.0. Windows XP installs
this automatically. Once the automatic installation is com-
plete, install the current driver software from the installa-
tion CD.
US only: In addition to the D-channel protocol, ISDN
users in the USA must find out their SPID.
SPID stands for Service Profile IDentifier. A SPID is a num-
ber assigned by your ISDN service provider to each sub-
scriber interface. SPIDs let the ISDN switch know which
ISDN services a given logical terminal (ISDN device) can
access. This is particularly important for ISDN tele-
phones.
AVM continuously extends the functionality of the driver
software for your ISDN-Controller B1 PCI v4.0. If a more cur-
rent version of the driver software is available, it may be ob-
tained from the ADC under CARDWARE\B1_PCI\
WINDOWS.XP\ENGLISH.
Installing the Driver Software
20 ISDN-Controller B1 PCI v4.0 – 5 Installation in Windows XP / Server 2003
5.1 Installing the Driver Software
Once the ISDN-Controller B1 PCI v4.0 has been installed in
your computer, it will be recognized automatically as a Plug
& Play device. Use the “Found New Hardware Wizard” to
configure the ISDN-Controller for operation. To do so, pro-
ceed as follows:
The following dialogs are part of the Windows XP operating
system. Consult the Windows XP manual wherever neces-
sary.
1. Start Windows XP.
2. The Windows XP Plug & Play mechanism automatically
recognizes the ISDN-Controller as the “Network Con-
troller”.
3. The “Add/Remove Hardware Wizard” is started. Con-
firm with “Next”.
4. First specify the D-channel protocol to be used: DSS1
(Euro ISDN), NI1, 5ESS or 1TR6 (obsolete). Confirm
with “Continue”.
5. Enter the desired multiple subscriber numbers in the
“Phone Number and SPID Information” window.
The settings performed are relevant only for the NDIS
WAN CAPI Driver (Internet, RAS over Dial-Up Network-
ing).
6. Confirm with “Next” and finally with “Finish”.
A message appears stating that you may start operation of
the ISDN-Controller immediately. This completes the initial
driver software installation for the ISDN-Controller
B1 PCI v4.0 in Windows XP.
Once the driver installation is concluded, the second step
is to update the driver software from the installation CD.
We recommend installing the current driver software from
the installation CD or the ADC.
1. Run the SETUP.EXE file.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87

AVM ISDN-Controller B1 PCI v4.0 Owner's manual

ISDN-Controller B1 PCI v4.0
AVM
Brand
AVM
Model
ISDN-Controller B1 PCI v4.0
Category
ISDN access devices
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents