Dlogixs MEETUS-E400 Operating instructions

Brand
Dlogixs
Model
MEETUS-E400
Category
Car TFT monitors
Type
Operating instructions
Operation Manual
MEETUS - C400
w ww.meetns.com
MEETUS-C400 Wireless Network System
www.meetns.com
Installation
Features
Front Panel Information
Rear Panel Information
Specifications
1.
2.
3.
4.
5.
Contents
MEETUS-E400 Wireless Network System
www.meetns.com
01
1. Installation
This is for content to prevent damage of property and to protect user,
please read surely and use rightly.
Before Using
Caution
NO!
NO!
-10c
+40c
Install the goods to airy place.
Designation : Don’t disassemble
Meaning : Mark that is a risk etc when
disassembling.
Designation : Unplug Power Code.
Meaning : Mark that is asking End User
separate Power Code from AC outlet.
This installation(Caution for using safety) is including the content of variable equipment generally,
so there can be included a content not to accord with an equipment as customer had.
There is a part to be overlapped with manual in each clause.
Absolutely don’t separate, repair and
restructure.
Don’t install the place where has a lot
of humidity, dust and soot.
(It may be caused by fire and electric
shock)
Don’t put a container on goods like vase,
flowerpot, cup, cosmetics, chemicals and
water etc.
(It may be caused by fire, electric shock and
injury due to coming down)
Don’t install the place where is low
temperature of -10℃ below or high
temperature of +40℃ over.
(It may be caused by defect or degra-
dation of goods)
Softly wipe surface of goods with dried
washcloth. Absolutely don’t use chemi-
cals or abstergent and it may peel up its
paint or go bad with surface.
Take care not to come in water or not
to touch with water and don’t touch it
with wet hand.
(It may be caused by electric shock)
Immediately ask A/S repair when dam
a ging Power Code (It may have
unexpected safety accident like electric
shock, fire etc.
Firmly fix Power plug not to shake (It
may be caused by fire in case of having
unstable connection./
Stop using when happening smoke or
getting strange smell, unplug the power
code immediately and contact A/S center.
(If disregard this, it may be caused by fire
or electric shock)
Don’t drop goods or have shock and put
goods away from the place where is hard
vibration or a kind of magnet.
Firmly fix Power plug not to shake (It
may be caused by fire in case of having
unstable connection.
MEETUS-E400 Wireless Network System
www.meetns.com
02
1. Installation
Install the equipment away from Tuner if possible.
Don’t install the equipment on power amplifier.
Don’t lean when installing Rack.
Hereby guarantee our equipment in free A/S for 1 year from purchasing date. However if its trouble is caused
by consumer, or by natural disaster even though it is in free A/S period, its A/S charge should be requested.
Caution when installing Rack
Warranty Period
Caution
Keep using Power and Voltage to be indicated, otherwise there is the risk like electric shock, fire.
This equipment has limitation of power to supply from AC outlet, so use total power consumption not to exceed
power to be indicated. (This is caused by fire)
Take the space of 100mm from wall at least in case of installation this equipment and the interval for radiation with
other equipment. Carefully read each manual when installing at rack and take its interval according to manual. (It is
caused by fire)
In case of having a stroke of thunder, unplug power code and disconnect connected wire to be connected to equip-
ment like antenna wire, phone wire etc. (It is caused by electric shock)
Don’t block the ventilation of equipment. (Because of internal heat, it may be caused by fire)
Don’t turn equipment inside out and lay equipment on.
Don’t use at confined place where is not airy except exclusive rack and to push equipment in.
Don’t use equipment on rug or blanket.
Don’t put slopping and shaking place. (It is caused by injury when falling)
Be careful not to put children in front of cassette tape, disk.
Be careful not to play children with packing box and material. ( It is caused by injury)
Don’t close power code to heating equipment. (It is caused by melting the sheath of code or by fire, electric shock)
Unplug plug with holding surely, don’t hold power code when separating.
Unplug the plug after turn it off surely when moving.
Firstly Separate antenna wire, connection code and external code etc when moving.
Firstly Remove CD, Cassette tape and video cassette when moving.
Do clean after unplugging the plug. (It may be caused by electric shock)
Firmly unplug the power code for safety when not using for long time.
Speak to Custom Service or purchasing Agency for internal cleaning at one per 2~3 years. In case of having a lot of
dust, it may be caused by fire or not working. Specially, it will be very effective if you do it before coming rainy season.
Minimize Volume level before power on.
Use the AC outlet that has earth connection.
MEETUS-C400 Wireless Network System
www.meetns.com
2. Features
03
7 INCH WIDE TFT LCD PANEL WITH FULL TOUCH SCREEN.
NETWORK CONTROL FOR ALL FUNCTION.
(CONTROL POSSIBILITY FROM MASTER CONTROL ROOM)
INTERGRATED CONTROL SYSTEM,
MOVEMENT CONTROL (2CH),
LIGHTING CONTROL (2CH),
AUDIO MIXER CONTROL (4CH IN/OUT, 4x4 MIXING,
STEREO, 3BAND EQ),
VIDEO MATRIX (4x4 RGB SWITCHER),
POWER AMPLIFIER MONITOR (FEEDBACK FOR 4CH),
CUE RESERVATION/ CONTROL
EXTENSION USING USB SLOT FOR ADDING VOLUME, LIGHTING AND
MOVEMENT CONTROL CHANNEL.
USB FOR COMMUNICATION BETWEEN UNITS, NETWORK SYSTEM FOR
COMMUNICATIOIN WITH SEVER PC.
MEETUS-C400 Wireless Network System
www.meetns.com
3. Front Panel Information
7 INCH TOUCH LCD
Moving to SETUP menu and setting each function with touch screen.
1
CH(MUTE)
Muting sound.
3
UP/DOWN
Doing UP function for volume, lighting brightness and movement control.
Doing DOWN function for volume, lighting brightness and movement control.
2
04
1
3
2
MEETUS-C400 Wireless Network System
www.meetns.com
4. Rear Panel Information
AC POWER ON/OFF SWITCH
Switch for turn on/off.
1
EARTH TERMINAL
Terminal to connect ground wire.
2
MOVEMENT / DIMMER
・ Terminal for 2CH movement control.
・ Terminal for 2CH lighting control.
3
AMP IN
4CH power amplifier input terminal for monitoring.
4
VIDEO MATRIX
INPUT(4CH): Video input terminal.
INPUT(4CH): Video input terminal.
5
EX SIGNAL (EX1, EX2)
Terminal for external input.
6
RS-232 TERMINAL
Terminal for program update.
10
RESET SWITCH
Physical switch to return to setting mode.
11
LAN TERMINAL
Terminal to communicate with sever connecting network.
12
DDRY CONTACT TERMINAL
PD : Terminal supplying dry contact connecting with DPD-1307.
EX-1/2 : Terminal for dry contact of external device.
GND : COM terminal using when doing dry contact to each terminal.
7
PROJECTOR
Terminal to control projector.
8
USB TERMINAL
9
05
6 7 8 9
10 11 12
1 2 3 4 5
MEETUS-C400 Wireless Network System
www.dlogixs.com
06
5. Specifications
NOTE
Specifications and design subject to change without notice for improvements.
■ AUDIO MATRIX
INPUT CHANNEL : 4 CHANNELS STEREO
INPUT CHANNEL : 4 CHANNELS STEREO
INPUT EQ: BASS : -14dB ~ +14dB
MIDDLE : -14dB ~ +14dB
TREBLE : -14dB ~ +14dB
INPUT VOLUME : -79dB ~ 0dB
INPUT GAIN : 0 ~ 30Db
OUTPUT CHANNEL : 4 CHANNELS STEREO
OUTPUT VOLUME : -79dB ~ 0dB
S / N : OVER 80dB
THD : UNDER 0.5%
FREQUENCY RESPONSE : 20Hz ~ 20KHz(+/- 3dB)
■ RGB SWITCHER
INPUT : 4CH, RGB VIDEO 75Ω 1Vｐ-ｐ, HD, VD SYNC 1~4ｐ-ｐ, TTL
OUTPUT : 4CH, RGB VIDEO 75Ω 1Vｐ-ｐ, HD, VD SYNC 1~4ｐ-ｐ, TTL
■ DIMMER
CIRCUIT : 2 CIRCUITS
POWER : AC 220V/4A, 60Hz
■ MOVEMENT
CIRCUIT : 2 CIRCUIT
POWER : AC 220V/4A, 60Hz
■ GENERAL
COMMUNICATION : LAN
DIMENSION(WxHxD) : 482(W)x132(H)x277(D)mm
WEITGHT : 5kg
※This product specifications and specifications to improve performance, there may be some changes.
ZZZPHHWQVFRP
ą7(/ą)$;
ą$6ą(PDLOVDOHV#GORJL[VFRP

ą$''5(66'ORJL[V%OG$Q\DQJ0DQDQ*X$Q\DQJ6L
*\HRQJJL'R.RUHD
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Dlogixs MEETUS-E400 Operating instructions

Brand
Dlogixs
Model
MEETUS-E400
Category
Car TFT monitors
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents