Allied Brass M-10-PC Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Allied Brass M-10-PC Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MOUNTING
SCREW
Step 1:
Determine your desired location for installation and make a mark for the location.Make mark where mounting screw will be
placed as shown below. Drill hole at the mark.
Drill holes for the desired location.
Pull Mounting
Step 2:
Place Pull to the desired location and screw from behind.
SURFACE MOUNTED
PULL ASSY
M-10
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.
/