TD10
TD10
TD10-16345-700
INSTRUCTION MANUAL
INDUSTRIAL BLENDER - TD10-16345-700
* Please read these instructions carefully before operation this appliance.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be observed
including the following:
- Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.
- To protect against risk of electrical shock, do not put cord, plug, base or
motor in water or other liquids.
- Never connect two or more appliances in the same power outlet.
- When not in use, unplug the blender.
- Avoid starting blender empty.
- Avoid contact with moving parts because blades are sharp. Handle carefully.
- Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and or damage to blender. A plastic spatula may be
used but only when blender is "NOT RUNNING".
- Only remove the container when blender "COMPLETELY STOPPED".
INSTRUCTIONS FOR USE
- Blender control is made by switch ( ON - OFF)
- It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.
- To start blender place small quantity of food before connecting it, and afterwards complete
container.
- When blender is running do not remove the lid.
- If blender action stops, turn blender off. Remove lid and use a plastic spatula
to push mixture toward blades. Replace lid and continue.
CLEANING PROCEDURE
- Clean container (cup) with liquid soap and water filling to half capacity.
- Turn on blender for some seconds.
- Turn off blender, empty the container and rinse it.
- Unplug blender clean body and external cup with a wet cloth.
- Do not use harsh detergent or chemical products for cleaning.
- Never use water jet or immerse appliance in water.
- Wipe off appliance switch using a dry cloth and wait at least half an hour before re-
conneting to the main power outlet.
The pictures/drawings are illustrations. All data can be changed without notification.
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari
Duque de Caxias - RJ / Brasil - CEP 25243-150
Phone: 55 21 2777- 8100 / 55 21 2777-8106
e-mail: [email protected] - www.croydon.com.br
INDUSTRIAL BLENDER 10 LITERS (TD10)
INDUSTRIAL BLENDER 10 LITERS (TD10)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
37.339-3
37.033-3
37.570-3
37.063-3
37.511-3
37.154-3
37.062-3
37.335-3
37.371-3
642
635
37.058-3
37.155-3
37.158-3
37.023-3
37.370-3
37.156-3
534
332
643
9.410-3
37.355-3
37.201-3
4.109-3
37.116-3
37.312-3
4.056-3
14.033-3
3.000-3
359
604
Lid
Knife’s Nut
Knife
Retainer
Underfriction Washer
Bushing
O’Ring
Container
Base
Washer 1/4”
Nut M6
Nut
Shaft
Elastic Pin
Rubber Ring
Elastic Pin
Shaft Adapter
Screw 1/4”
Screw 1/4”
Washer 3/16”
Retainer
Flange of Coupling
Body
Bottom Cover
Switch
60HZ Motor
Container’s Base
Cord Connection
Foot
Screw 3/16”
Nut 3/16”
Item Code Description
17
18
Shaft Adapter
37.336-4
16
15
1
8
9
10
11
Container 10Lt
Assy. without socket
37.375-4
Container 10Lt
Assy.
37.335-5
Socket Assy.
37.371-4
12
5
2
5
4
6
7
3
14
13
20
31
30
22
27
23
26
Base Assembly
37.342-5
10
21
19
25
28
24
20
31
29
Power (HP)
Amperage (A)
Speed (rpm)
Capacity (l)
Weight (Kg/lbs)
Dimension WxHxD (cm/in)
7.6
½
3500
10
Voltage (V)
110 (60 Hz)
9.3/20.5
28/11.1 x 80/31.5 x 22.5/8.9
TD10-16345-700
Technical Data
/
