Gamber-Johnson In-Console Printer Mount Installation guide

Brand: Gamber-Johnson

Model: In-Console Printer Mount

Type: Installation guide

This manual is also suitable for

Gamber-Johnson In-Console Printer Mount is a device designed to mount a printer inside a vehicle's console. It allows for easy access to the printer while keeping it securely in place.

The mount is compatible with Brother printers and comes with a USB cable, but the power cable is not included.

The mount can be installed in a GJ console and features a lid that locks for added security.

The printer mount is easy to install and use, making it a valuable addition to any vehicle that requires printing on the go.

Gamber-Johnson In-Console Printer Mount is a device designed to mount a printer inside a vehicle's console. It allows for easy access to the printer while keeping it securely in place.

The mount is compatible with Brother printers and comes with a USB cable, but the power cable is not included.

The mount can be installed in a GJ console and features a lid that locks for added security.

The printer mount is easy to install and use, making it a valuable addition to any vehicle that requires printing on the go.

INST-1000

GJ 7170-0822

CONSOLE KIT

7160-1543 PRINTER MOUNT

OEM USB

RELOCATION

OEM 12V

RELOCATION

*NOTE:

IF A GJ MOTION DEVICE IS REQUIRED, A SIDE MOUNT MAYBE PRUCHASED AND

INSTALLED. PN 19416 OR DS-138

7160-1543

IN-CONSOLE PRINTER MOUNT FOR 7160-1477

Printing Spec:

PS-001

1/3

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Form

Revision

Product

INSTALLATION INSTRUCTIONS

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Install

#1 To install the printer mount, first install the Brother Printer in place slide it from left to right to make

sure the right side tucks under the right side tab and install the printer retainer with 2 philip screw on the

left side.

#2. Install the supplied USB cable first then the Power cable (not supplied) then route the cable as

desired for best funtction

2/3

#4. With printer installed in the mount, the mount can now be installed in the GJ console as shown.

*the Lid of the printer mount does not attached to the lower half.

After installed check the lid locking function and adjust as needed.

3/3

Gamber-Johnson In-Console Printer Mount Installation guide

Brand: Gamber-Johnson

Model: In-Console Printer Mount

Type: Installation guide

This manual is also suitable for

Gamber-Johnson In-Console Printer Mount is a device designed to mount a printer inside a vehicle's console. It allows for easy access to the printer while keeping it securely in place.

The mount is compatible with Brother printers and comes with a USB cable, but the power cable is not included.

The mount can be installed in a GJ console and features a lid that locks for added security.

The printer mount is easy to install and use, making it a valuable addition to any vehicle that requires printing on the go.

Download PDF

report