Page is loading ...
TECHNICAL SUPPORT
Tel: 0191 224 3174
Fax: 0191 224 4938
Email: [email protected]
Web: www.videxuk.com
SERIES
3000
3002
Smart Series Audiophone
QUICK GUIDE
ART. 3002
3000 Smart Series audiophone incorporating both AC buzzer call input
and an adjustable electronic call tone input, "door open" push button and
additional service button for intercommunicating call.
For use on the audio IK8K 2 way intercommunicating kit.
Can also be used on traditional "3+1" audio systems that require an
electronic call tone including the following audio kits: 4K series, 8K series
and VR120DK series kits or on traditional "4+1" audio and video systems
that require an AC buzzer call.
Call tone adjustment: 3 level (low, medium and high) call tone switch.
QG_3002_V.1.0_03/17
Door Open button
Handset speaker
Handset
microphone
Audiophone
Handset
Handset cord
Front cover
retaining screw
3 level (low,
medium and high)
call tone volume
adjustment
OVERVIEW
Intercommunicating call
button/Spare Service
button
ANSWERING A CALL
TO OPEN THE DOOR
To answer an incoming call
pick up the handset.
With the handset lifted a
conversation with the caller
can begin.
To end the call replace the
handset back on the cradle.
During a call
(call tone or AC buzzer call)
With the handset lifted, press the lock button
to operate the lock.
To end the call replace the
handset back on the cradle.
During a
conversation
12 3
12
CALL TONE VOLUME ADJUSTMENT (CALL TONE ONLY)
In every situation
Move the volume switch to the lower
position to set the call tone volume
to low, to the middle position to set
the call tone volume to medium and
to the upper position to set the call
tone volume to high.
TECHNICAL ADVICE
For further technical advice and assistance on the
installation of this product please contact Videx technical on
tel: 0191 224 3174.
For any sales advice and assistance please contact Videx
sales on tel: 0191 238 8324.
To download a copy of this quick guide visit the Videx
website: www.videxuk.com
MAKING AN INTERCOMMUNICATING CALL (BETWEEN AUDIOPHONES)
In standby Pick up the handset. Press the
additional service button to call the
other intercommunicating phone.
When the phone which is called
rings, it can be answered and a 2 way
conversation between the caller and
receiver can begin.
To end the call/conversation
between the phones replace the
handsets back on the cradle.
12 3
/