Samsung LE32M61B User manual

Category
LCD TVs
Type
User manual
LCD TV
LE32M6
LE40M6
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
BN68-00956C-00
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a Class B digital apparatus.
Register your product at
www.samsung.com/global/register
LCD TV
LE32M6 / LE40M6
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle
it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
BN68-00956C-00Cover.qxd 10/18/05 4:33 PM Page 1
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Digital Ready TV: When you
select the regular screen (4:3)
mode to watch an SD-grade
digital broadcast (and the
Set-Top
Box
output is 480p).
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Digital Ready TV: When you
select the wide screen (16:9)
mode to watch an SD-grade
digital broadcast (and the
Set-Top
Box
output is 1080i).
Digital Ready TV: When the
TV receives HD-grade signals
(and the
Set-Top Box
output is 1080i).
When you watch a digital HD-grade
broadcast on a regular (4:3) TV with the
screen size "16:9" or "Panorama" selected,
you will be able to watch the program but the
top and bottom edges of the screen will be
cropped.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
Note : If the borders at the top, bottom and
the center of the screen remain fixed
for an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 2
• Integrated
Digital TV
(Wide-screen): When the TV
receives SD-grade (regular)
broadcasting signals (receives
480p regular signals).
Digital Ready TV
(wide-screen):
digital TV: When the TV receives
SD-grade (regular) broadcasting
signals (with a Set-Top Box).
When you watch an analog
(regular) broadcast on a
wide-screen TV (with the 4:3 screen
mode selected).
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
When you watch a DVD, CD or a
video in wide-screen (21:9) format
on a wide-screen (16:9) TV.
• When you connect a computer or a
game console to the TV and select
the 4:3 screen mode.
If you connect a DVD player, computer or a
game console to the wide-screen TV and
watch a movie or play a game in regular
(4:3) or wide (21:9) screen mode, the left
and right side edges, or the top and bottom
edges of the screen will be cropped.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 3
English-2
Contents
CONNECTING AND PREPARING YOUR TV
Viewing the Control Panel ......................................................................................... 4
Viewing the Connection Panel................................................................................... 5
- Connecting an Aerial or Cable Television Network ............................................... 6
- Connecting Component Devices (DTV/DVD) ....................................................... 6
- Connecting External A/V Devices .......................................................................... 6
- SERVICE ................................................................................................................ 6
- Connecting Set-Top Box, VCR or DVD ................................................................. 6
- Connecting HDMI/DVI ............................................................................................ 7
- Connecting Computer ............................................................................................ 7
- Connecting AUDIO ................................................................................................. 7
- Kensington Lock ..................................................................................................... 7
Viewing the Remote Control (All Functions Except Teletext) ................................... 8
Viewing the Remote Control (Teletext Functions)..................................................... 9
Installing Batteries in the Remote Control................................................................. 10
Switching On and Off................................................................................................. 11
Placing Your Television in Standby Mode ................................................................. 11
Becoming Familiar with the Remote Control ............................................................ 12
Plug and Play ............................................................................................................. 13
Choosing Your Language .......................................................................................... 14
SETTING THE CHANNELS
Storing Channels Automatically................................................................................. 15
Storing Channels Manually........................................................................................ 16
Editing the Channels.................................................................................................. 18
Sorting the Stored Channels ..................................................................................... 19
Assigning Channels Names ...................................................................................... 20
Fine Tuning Channel Reception ................................................................................ 21
SETTING THE PICTURE
Changing the Picture Standard ................................................................................. 22
Adjusting the Custom Picture .................................................................................... 23
Changing the Colour Tone......................................................................................... 24
Resetting the Picture Settings to the Factory Defaults............................................. 24
Changing the Picture Size ......................................................................................... 25
Freezing the Current Picture...................................................................................... 25
Using the Digital NR (Digital Noise Reduction) Feature........................................... 26
DNIe (Digital Natural Image engine) ......................................................................... 27
My Colour Control ...................................................................................................... 28
Dynamic Contrast....................................................................................................... 29
Brightness Sensor...................................................................................................... 30
Viewing the Picture In Picture (PIP) .......................................................................... 31
SETTING THE SOUND
Adjusting the Volume ................................................................................................. 33
Switching the Sound Off Temporarily ........................................................................ 34
Selecting the Sound Mode ........................................................................................ 34
Changing the Sound Standard .................................................................................. 35
Adjusting the Sound Settings .................................................................................... 35
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 2
English-3
Contents
SETTING THE SOUND
Setting the TruSurround XT (SRS TSXT) .......................................................... 36
Adjusting the Volume Automatically.................................................................... 37
Connecting Headphones .................................................................................... 38
Selecting the Internal Mute ................................................................................ .38
Listening to the Sound of the Sub Picture.......................................................... 39
SETTING THE TIME
Setting and Displaying the Current Time............................................................ 40
Setting the Sleep Timer ...................................................................................... 41
Switching the Television On and Off Automatically ............................................ 42
Activating the Child Lock .................................................................................... 43
SETTING THE OTHERS
Setting the Blue Screen Mode ............................................................................ 44
Selecting the Melody .......................................................................................... 44
Selecting a Device from External Sources ........................................................ 45
Viewing Pictures from External Sources ............................................................ 46
SETTING THE PC
Setting up Your PC Software (Based on Windows XP) .................................... 47
Adjusting the PC Screen Automatically .............................................................. 48
Coarse and Fine Tuning of the Image................................................................ 49
Changing the Image Position.............................................................................. 50
Initializing the Image Settings ............................................................................ 51
USING THE TELETEXT FEATURE
Teletext Decoder.................................................................................................. 52
Displaying the Teletext Information .................................................................... 52
Selecting a Specific Teletext Page...................................................................... 53
Using Fastext to Select a Teletext Page ............................................................ 54
Setting Up Your Remote Control ........................................................................ 55
RECOMMENDATIONS FOR USE
Troubleshooting: Before Contacting Service Personnel .................................... 59
Installing the Wall Mount Kit................................................................................ 60
Installing the Stand .............................................................................................. 62
Using the Anti-Theft Kensington Lock ................................................................ 63
Technical and Environmental Specifications .................................................... 64
Display Mode (PC) .............................................................................................. 65
Pin Configurations .............................................................................................. 66
Press Important Note
Symbols
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 3
English-4
Viewing the Control Panel
SOURCE
Displays a menu of all of the available input
sources ( TV, Ext. 1, Ext. 2, AV, S-Video,
Component, PC, HDMI).
Also used to confirm your choice on the
on-screen menu.
MENU
Press to see an on-screen menu of
your TV’s features.
-
+
Press to decrease or increase the volume.
Also used to select items on the
on-screen menu.
Press to change channels.
Also press to highlight various items
on the on-screen menu.
(Without the Remote Control, You can
turn on TV by using the Channel buttons.)
(Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights
up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Light Detecting Sensor
Adjusts brightness of screen automatically by
detecting brightness of surrounding environment.
This sensor works when Brightness Sensor is on.
Speakers
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 4
English-5
Viewing the Connection Panel
Power Input
Whenever you connect an audio or video system to your set, ensure that all elements are
switched of
f.
When connecting an external device, match the colour of the connection terminal to the cable.
[Side Panel Jacks]
[Rear Panel Jacks]
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 5
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
-Acable television network
-Asatellite network
Connecting Component Devices (DTV/DVD)
- Connect component video cables to component connector (“PR”, “PB”, “Y”) on the rear of your set and
the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to
the DTV (or DVD) and connect the DTV (or DVD) to component connector (
“PR”, “PB”, “Y”) on your set.
- The Y, P
B and PR connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y
and R-Y or Y, Cb and Cr.
- Connect RCA audio cables to “
R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “
R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output ( ) on the rear of your set. While the
headphone is connected, the sound from the built-in speakers will be disabled.
SERVICE
- Connector for engineer.
Connecting Set-Top Box, VCR or DVD
- Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box
to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Input/Output Specification
Connector
SCART 1 (EXT 1)
SCART 2 (EXT 2)
Video Audio (R/L) S-Video RGB Video+Audio (R/L)
Only TV Out
Monitor Out
(TV/Ext. 1/Ext. 2/AV/S-VHS)
Input Output
English-6
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 6
English-7
Viewing the Connection Panel
Connecting HDMI/DVI
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players,
AV receivers and digital TVs).
- No sound connection is needed for an HDMI to HDMI connection.
What is HDMI?
- HDMI, or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.
- “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of
digital audio (5.1 channels).The difference between HDMI and DVI is that the HDMI device is smaller
in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi - channel digital audio.
- Use the HDMI/DVI terminal for DVI connection to an extended device.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
R - AUDIO - L” terminal on DVI for sound output.
Connecting Computer
- Connect the D- Sub cable to “PC (PC IN)” on the rear of your set and the other end to the Video Card of
your computer.
- Connect the stereo audio cable to “
AUDIO (PC IN)” on the rear of your set and the other end to
“Audio Out” of the sound card on your computer.
Connecting AUDIO
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding
audio in connectors on the Amplifier or DVD Home Theater.
Kensington Lock
- Refer to “Using the Anti-Theft Kensington Lock” on page 63.
- The place of the Kensington Lock may be different depending on its model.
Speaker SCART2 Out & Audio Out
RF Scart, AV, S-Video
Component, PC, HDMI
RF
Scart, AV, S-Video
Component, PC, HDMI
Internal Mute Off
Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output
Internal Mute On
Mute Mute Mute Sound Output Sound Output Sound Output
Video No Signal
Mute Mute Mute Mute Sound Output Sound Output
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 7
English-8
Viewing the Remote Control (All Functions Except Teletext)
Number buttons for
direct channel access
Automatic Power-off
(Refer to page 41)
When your remote does not work,
change the batteries and press the
“RESET” button for 2-3 seconds
before use.
Picture freeze
(Refer to page 25)
The performance of the remote control may be affected by bright light.
Picture-In-Picture On / Off
(Refer to pages 31-32)
Make the remote control works
for TV, VCR, CATV, DVD,
STB (Refer to pages 55~57)
Television Standby button
(Refer to page 11)
Selects the TV mode directly
(Refer to page 46)
Temporary sound switch-off
(Refer to page 34)
Displays the main on-screen menu.
(Refer to page 12)
DNIe Demo On/Off
(Refer to page 27)
Sound mode selection
(Refer to page 34)
Sound effect selection
(Refer to page 35)
-Volume increase
-Volume decrease
(Refer to page 33)
PIP FUNCTIONS
(Refer to pages 31~32)
SOURCE
: Input source selection
SWAP : Interchange the main
and sub picture
SIZE : PIP size selection
POSITION
:PIP position selection
Previous channel
Available source selection
(Refer to page 46)
Use to see information on the
current broadcast.
(Refer to page 40)
Control the cursor in the menu
(Refer to page 12)
Picture effect selection
(Refer to page 22)
Selects the PC mode directly
(Refer to pages 48~51)
Picture size selection
(Refer to page 25)
SRS TSXT selection
(Refer to page 36)
Exit the on-screen menu
(Refer to page 12)
-Next channel
-Previous channel
(Refer to page 12)
Display selected input source
and battery status
VCR/DVD FUNCTIONS;
:
REWIND
:
STOP
:
PLAY/PAUSE
:
FAST FORWARD
SET
(Refer to pages 55~57)
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 8
English-9
Viewing the Remote Control (Teletext Functions)
Exit from the teletext display
P: Teletext next page
P: Te letext previous page
Teletext Function : Refer to pages 52-54 for details
Teletext display/mix both
teletext information and the
normal broadcast
Teletext sub page
Teletext cancel
Tele text hold
Teletext mode selection
(LIST/FLOF)
Teletext reveal
Teletext index
Teletext size selection
Teletext store
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 9
English-10
Installing Batteries in the Remote Control
1 Slide the cover out completely.
2 Install two AAA size batteries.
Make
sure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.
3 Replace the cover.
Remove the batteries and store them in a cool, dry place
if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work!
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 10
English-11
Switching On and Off
The mains lead is attached to the rear of your set.
1 Plug the mains lead into an appropriate socket.
Result
:
The standby indicator lights up on the front panel.
The main voltage is indicated on the rear of your set and the
frequency is 50 or 60Hz.
2 Press the
POWER
button on the front of the panel.
Result
:
The programme that you were watching last is reselected
automatically.
3 Press the numeric button (0~9) or channel up/down ( / ) button
on the remote control or button on the lower-right of
the panel.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).
4 To switch your set off, press the
POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power
consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1 Press the
POWER
button on the remote control.
Result
:
The screen is turned off and a red standby indicator
appears on the front of your set.
2 To switch your set back on, simply press the
POWER
, numeric
buttons (
0~9) or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time
(when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 11
English-12
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume.
Set up your set using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the
-
next stored channel.
Used to display the
-
previous stored channel.
to Used to display the corresponding channels.
For double digit channels, the second digit
must be pushed immediately after the first.
Failure to do this will result in a single digit
channel being displayed.
Used to increase the
-
volume.
Used to decrease the
-
volume.
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button
again, or press the / button.
MENU
Used to display the Used to return to the
on-screen menu system. previous menu or
normal viewing.
EXIT
Used to exit the on-screen menu system.
Used to move among the menu items.
Used to select a menu item or increase
the value of the selected item.
Used to return to the previous menu item or
decrease the value of the selected item.
-
Used to confirm your
ENTER
choice.
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 12
English-13
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1 If the set is in standby mode, press the
POWER
button on the
remote control.
Result
: The message
Start Plug & Play.
is displayed. It
appears for a little while, and then the
Language
menu
is automatically displayed.
2 Select the appropriate
language
by pressing the or button.
The available languages are listed
.
You can choose one of 21 languages.
3 Press the
ENTER
button to confirm your choice.
Result: The message
Check antenna input.
is displayed with
the
OK
selected.
4 Press the
ENTER
button.
Result
: The following areas are available:
Belgium - France - Germany - Italy -
Netherlands - Spain - Sweden - Switzerland -
United Kingdom - Eastern Europe- Others
5 Select your Country by pressing the or button.
Press the
ENTER
button.
Result
:
The
Auto Store
menu is displayed with the
Start selected.
6 Press the
ENTER
button.
Result
:
The channel search will start and end automatically.
7 Press the
ENTER
button.
Select the
hour
or
minute
by pressing the or button.
Set the
hour
or
minute
by pressing the or button.
(Refer to “
Setting and Displaying the Current Time” on page 40)
8 Press the
ENTER
button to confirm your setting.
Result
:
The
message
Enjoy your watching.
is displayed, and
then the channel which has been stored will be activated.
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 13
English-14
Plug and Play
If you want to reset this feature...
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Setup
.
Press the
ENTER
button
.
Result:
The options available in the
Setup
group are displayed.
3
The
Plug & Play
is selected.
4 Press the
ENTER
button
.
Result:
The message
Start Plug & Play.
is displayed.
5 For further details on how to set, refer to the previous page.
This function doesn't work when source is in PC mode.
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Setup
.
Result
:
The options available in the
Setup
group are displayed.
3 Press the
ENTER
button
.
4 Press the or button
to
select
Language
.
Press the
ENTER
button
.
Result:
The available
languages
are listed.
5 Select a particular language by pressing the or button
repeatedly.
Press the
ENTER
button
.
You can choose one of 21 languages.
6 When you are satisfied with your choice, press the
EXIT
button to
return to normal viewing.
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 14
English-15
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However,
you can sort numbers manually and clear any channels you do not wish
to watch.
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Channel
.
Result
:
The options available in the
Channel
group are displayed.
3 Press the
ENTER
button
.
Result
:
The
Country
is selected.
4 Press the
ENTER
button again
. Select your
Country
by pressing the
or
button repeatedly.
Result
:
The following countries are available:
Belgium - France - Germany - Italy -
Netherlands - Spain - Sweden - Switzerland -
United Kingdom - Eastern Europe- Others
5 Press the
ENTER
button
.
6 Press the or button to select
Auto Store
.
Press the
ENTER
button
.
Result: The Auto Store menu is displayed with the Start selected.
7 Press the
ENTER
button to search the channels. The sub menu
is changed from
Start
to
Stop
with channel search started.
Result
: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
To return to the previous menu, press the MENU button.
To stop the search before it has finished, press the
ENTER
button with
Stop
selected.
8 When the channels have been stored, you can:
Sort them in the order required (refer to page 19)
Assign names to the stored channels (refer to page 20)
Add or delete the channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 21)
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 15
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Channel
.
Result:
The options available in the
Channel
group are
displayed.
3 Press the
ENTER
button
.
4 Press the or button
to
select
Manual Store
.
Press the
ENTER
button.
Result
: The options available in the
Manual Store
menu are
displayed with
Programme
selected.
5 Press the
ENTER
button again.
To assign a programme number to a channel, find the correct
number by pressing the or button and then press the
ENTER
button
.
You can also set a programme number by pressing number
buttons on the remote control.
6 Press the or button to select
Colour System
and then press
the
ENTER
button.
Select the
colour
standard required by pressing the or button
repeatedly and then press the
ENTER
button.
Result
: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NTSC 4.43
7 Press the or button to select
Sound System
and then press
the
ENTER
button.
Select the sound standard required by pressing the or button
repeatedly and then press the
ENTER
button.
Result
: The sound standards are displayed in the following order:
BG - DK - I - L
English-16
Storing Channels Manually
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 16
8 If you know the number of the channel to be stored,
Press the or button to select
Channel
and then press the
ENTER
button.
Select
C (Air channel) or S (Cable channel) by pressing the
or button.
Press the button to select channel.
Select the required number by pressing the or button and
then press the
ENTER
button.
If there is an abnormal sound or no sound, re-select the sound
system required.
You can also set a
channel
by pressing number buttons on the
remote control.
9 If you do not know the channel numbers, press the or button
to select
Search
and then press the
ENTER
button.
Search
by pressing
the
or button and then press the
ENTER
button.
Result
: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
10 Press the or button to select
Store
.
Select
OK
by pressing the
ENTER
button.
Result
: The channel and associated programme number are
stored.
11 Repeat steps 8 to 10 for each channel to be stored.
Channel mode
P (Programme mode): When tuning is completed, the
broadcasting stations in your area will have been assigned
to position numbers from P00 to P99. You can select a
channel by entering the position number in this mode.
C (Real channel mode): You can select a channel by
entering the assigned number to each broadcast station in
this mode.
S (Cable channel mode): You can select a channel by
entering the assigned number to each cable channel in this
mode.
English-17
Programme : P 1
Colour System : AUTO
Sound System : BG
Channel : C 2
Search : 48 MHz
Store : ?
Storing Channels Manually
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 17
You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Channel
.
Press the
ENTER
button
.
Result:
The options available in the
Channel
group are
displayed.
3 Press the or button to select
Add/Delete
.
Press the
ENTER
button.
Result
:
The state of the current
channel
is displayed.
4 Press the / button to select
channel
that you wish to
add
or
delete
.
Result
:
If the channel that you wish to edit is not in memory, the
Add
is selected and displayed.
Otherwise, if the channel that you wish to edit is in
memory, the
Delete
is selected and displayed.
5 Press the
ENTER
button to
add
or
delete
channel.
6 Press the
MENU
button to return to the previous menu or press
the
EXIT
button to return to normal viewing.
7 Repeat steps 4 and 5 for each channel to be added or deleted.
You can also add or delete channel by simply pressing the
ADD/DEL button under the remote’s cover.
English-18
Editing the Channels
01 BN68-00956C-00Eng.qxd 10/18/05 5:00 PM Page 18
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70

Samsung LE32M61B User manual

Category
LCD TVs
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI