Olympus FE-5050 User manual

Instruction Manual

FE-5050/FE-4050

DIGITAL CAMERA

● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these

instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for

future reference.

● We recommend that you take test shots to get accustomed to your camera before taking important photographs.

● In the interest of continually improving our products, Olympus reserves the right to update or modify information

contained in this manual.

● The screen and camera illustrations shown in this manual were produced during the development stages and may

differ from the actual product. Unless otherwise speciﬁ ed, the explanation about these illustrations is provided for

FE-5050.

2

EN

Step

1

Other accessories not shown: warranty card

Contents may vary depending on purchase location.

Checking the contents of the box

LI-42B Lithium

Ion Battery

USB cable OLYMPUS

Setup

CD-ROM

F-2AC

USB-AC adapter

or

Step

2

Preparing the Camera

“Preparing the Camera” (p. 12)

Step

3

Shooting and Playing Back Images

“Shooting, Viewing, and Erasing” (p. 19)

Step

4

How to Use the Camera

“Camera Settings” (p. 3)

Step

5

Printing

“Direct printing (PictBridge)” (p. 46)

“Print Reservations (DPOF)” (p. 50)

Contents

Names of Parts ............................................... 8

Preparing the Camera .................................. 12

Shooting, Viewing, and Erasing ................. 19

Using Shooting Modes ................................ 26

Using Shooting Functions .......................... 30

Menus for Shooting Functions ................... 34

¾

Menus for Playback, Editing, and Printing

Functions ...................................................... 37

Menus for Other Camera Settings .............. 40

Printing .......................................................... 46

Usage Tips .................................................... 53

Appendix ....................................................... 58

¾

AV cableDigital camera Strap

3

EN

Camera Settings

Using the Direct Buttons

Frequently used functions can be accessed using the direct buttons.

Shutter button (p. 20)

Zoom buttons (p. 21)

q button (switch between shooting and

playback) (p. 20, 22)

m button (p. 5)

E button (menu guide) (p. 25)

Arrow pad

H (left)

G (down) /

D button (erase) (p. 24)

F (up) /

INFO button (change information

display) (p. 22, 25)

I (right)

H button

(p. 4, 17)

The symbols FGHI displayed for image

selections and settings indicate that the arrow pad

is to be used.

N

ORM

OK

SINGLE PRINT

PRINT

4/304/30

MORE

12:30’10/10/26’10/10/26 12:30

N

ORM

14M

FILE

100 0004100 0004

10 26 12 30:..2010

OK

SET

X

YMDTIME

MENU

CANCEL

Y/M/DY/M/D

4

EN

Using the Menu

Use the menu to change camera settings such as the shooting mode.

There may be menus that are unavailable depending on other related settings or the s mode (p. 26).

Function menu

Press the H button during shooting to display the function menu. The function menu is used to choose the

shooting mode and provides access to frequently used shooting settings.

To select the shooting mode

Use HI to select a shooting mode and press the H button.

To select the function menu

Use FG to select a menu and use HI to select a menu option. Press the H

button to set the function menu.

44

PP

0.00.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

14

M

PROGRAM AUTOPROGRAM AUTO

Shooting

Function menu

Shooting mode

PP

Selected option

Setup menu (p. 5)

5

EN

1 Press the m button.

The setup menu is displayed.

DIGITAL ZOOM OFF

AF MODE FACE/iESP

MENU

OK

SETEXIT

1

2

DATE STAMP

ICON GUIDE ON

OFF

RESETRESET

COMPRESSION NORMAL

2 Press H to highlight the page tabs. Use

FG to select the desired page tab and

press I.

1

MENU

OK

SETEXIT

POWER SAVE OFF

VIDEO OUT

WORLD TIME

NTSC

BRIGHT

ENGLISH

2

Page tab

1

MENU

OK

SETEXIT

2

POWER SAVE OFF

VIDEO OUT

WORLD TIME

NTSC

ENGLISH

BRIGHTBRIGHT

Submenu 1

3 Use FG to select the desired submenu 1

and then press the H button.

1

2

MENU

OK

SETEXIT

POWER SAVEPOWER SAVE OFFOFF

VIDEO OUT

WORLD TIME

NTSC

BRIGHT

ENGLISH

1

OK

SET

MENU

BACK

2

POWER SAVEPOWER SAVE OFFOFF

VIDEO OUT

WORLD TIME

NTSC

BRIGHT

ENGLISH

POWER SAVE

ON

OFFOFF

Submenu 2

●

4 Use FG to select the desired submenu 2

and then press the H button.

Once a setting is selected, the display returns to

the previous screen.

There may be additional operations.

“Menu Settings” (p. 34 to 45)

1

2

MENU

OK

SETEXIT

POWER SAVEPOWER SAVE ONON

VIDEO OUT

WORLD TIME

NTSC

BRIGHT

ENGLISH

5 Press the m button to complete the

setting.

●

Setup menu

Press the m button during shooting or playback to display the setup menu. The setup menu provides access

to a variety of camera settings, including options not listed in the function menu, display options, and the time and

date.

6

EN

Menu Index

Menus for Shooting Functions

1 Shooting mode

P (PROGRAM AUTO) ......p. 19

M (iAUTO) ...................p. 26

N (DIS MODE) ..............p. 26

s (SCENE MODE) .....p. 26

P (MAGIC FILTER) ....p. 28

~ (PANORAMA) ..............p. 29

A (MOVIE) ......................p. 20

2 Flash .................................p. 30

3 Macro ...............................p. 30

4 Self-timer ..........................p. 31

5 Exposure compensation ...p. 31

6 White balance ...................p. 32

7 ISO ...................................p. 32

8 Image size (Still images) ..p. 33

9 # (Setup) X

z (Shooting) / A (Movie)

RESET..............................p. 34

IMAGE SIZE (Movies) ......p. 34

COMPRESSION

(Still images) ...................p. 34

FRAME RATE (Movies) ....p. 34

AF MODE .........................p. 35

DIGITAL ZOOM ................p. 35

IS MOVIE MODE

(Movies) ..........................p. 35

R (Movies) ........................p. 36

ICON GUIDE ....................p. 36

DATE STAMP ...................p. 36

44

PP

0.00.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

14

M

PROGRAM AUTOPROGRAM AUTO

4

8

5

1

2

3

7

6

9

1

2

MENU

OK

SETEXIT

DIGITAL ZOOM OFF

AF MODE FACE/iESP

DATE STAMP

ICON GUIDE ON

OFF

RESET

COMPRESSION NORMAL

1

2

IMAGE SIZE VGA

IS MOVIE MODE

OFF

ON

FRAME RATE 30fps

MENU

OK

SETEXIT

R

7

EN

Menus for Playback, Editing, and Printing Functions

1 r (Settings 1)

MEMORY FORMAT/

FORMAT .......................p. 40

BACKUP .......................p. 40

q POWER ON ...........p. 40

KEEP

K

SETTINGS ...p. 40

PW ON SETUP ............p. 41

SOUND SETTINGS

*1

...p. 41

BEEP

*2

..........................p. 42

PIXEL MAPPING ..........p. 42

2 s (Settings 2)

s (Monitor) ................p. 42

VIDEO OUT ..................p. 43

POWER SAVE..............p. 44

W (Language) ............p. 44

X (Date/time) .............p. 44

WORLD TIME...............p. 45

1

2

PIXEL MAPPING

MENU

OK

SETEXIT

BACKUP

PW ON SETUP ON

SOUND SETTINGS

KEEP

K

SETTINGS

YES

q POWER ON YES

FORMAT

1

2

Menus for Other Camera Settings

1

2

MENU

OK

SETEXIT

SLIDESHOW

EDIT

ERASE

PRINT ORDER

y

0

1

1 q (Playback)

SLIDESHOW ................p. 37

EDIT .......................p. 37, 38

ERASE ......................... p. 38

PRINT ORDER .............p. 39

0 (Protect) ................p. 39

y (Rotate)....................p. 39

*1

Available in the FE-5050 only.

*2

Available in the FE-4050 only.

8

EN

Names of Parts

Camera unit

1

3

7

6

5

4

8

9

2

8

7

4

5

6

1

2

3

FE-4050

1 Strap eyelet ....................p. 9

2 Multi-connector

..................p. 14, 16, 43, 46

3 Battery/card compartment

cover ...........................p. 12

4 Self-timer lamp .............p. 31

5 Flash ............................. p. 30

6 Microphone ............. p. 36, 37

7 Lens ........................ p. 58, 72

8

Tripod socket

9

Speaker

9

EN

4

3

6

8

2

1

5

7

9

10

1 3

FE-4050

1 n button ........p. 17, 19

2 Indicator lamp ...p. 13, 14, 16

3 Shutter button ...............p. 20

4 Monitor ...................p. 19, 53

5 m button ..................p. 5

6 Zoom buttons ...............p. 21

7 q button

(switch between shooting

and playback) .......p. 20, 22

8 H button (OK) .........p. 4, 17

9 Arrow pad .......................p. 3

INFO button

(change information

display) .................p. 22, 25

D button (erase) ..........p. 24

10

E button (menu guide)

....................................p. 25

Attaching the camera strap

FE-4050FE-5050

Pull the strap tight so that it does not come loose.

10

EN

Monitor

Shooting mode display

1/100 F2.8F2.8

PP

1/100

44

zz

N

ORM

PP

0.00.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

14

M

DATE

ONON

##

1 2

3

4

5

6

7

8

9

10

141516 11

17

18

19

2021

13

Still image

Movie

0:340:34

ONON

0.00.0

AUTO

WB

AUTO

WB

VGA

zz

1 2

4

5

6

7

1314916 12

17

18

##

10

1 Battery check ................p. 16

2 Shooting mode .......p. 19, 26

3 Flash ............................. p. 30

Flash standby/ﬂ ash charge

....................................p. 53

4 Macro ...........................p. 30

5 Self-timer ......................p. 31

6 Exposure compensation

....................................p. 31

7 White balance ...............p. 32

8 ISO ...............................p. 32

9 Image size ..............p. 33, 34

10

Setup menu ....................p. 5

11

Date stamp ...................p. 36

12

Recording with sound

(movies) ......................p. 36

13

World time ....................p. 45

14

Digital image stabilization

(movies) ......................p. 35

15

Compression

(still images)................p. 34

16

Number of storable pictures

(still images)................p. 19

Continuous recording length

(movies) ......................p. 21

17

Current memory ...........p. 60

18

AF target mark .............. p. 20

19

Camera shake warning

20

Aperture value ..............p. 20

21

Shutter speed ...............p. 20

11

EN

Playback mode display

Normal display●

1 Battery check ................p. 16

2 Print reservation/number of

prints ...................p. 50/p. 49

3 Protect .......................... p. 39

4 Adding sound .........p. 36, 37

5 Current memory ...........p. 60

6 Frame number/

total number of images

(still images)................p. 22

Elapsed time/

total recording time

(movies) ......................p. 23

7 Shooting mode .......p. 19, 26

8 Shutter speed ...............p. 20

9 Aperture value ..............p. 20

10

ISO ............................... p. 32

11

Exposure compensation

....................................p. 31

12

White balance ............... p. 32

13

Image size ..............p. 33, 34

14

File number

15

Date and time ...............p. 17

16

Compression

(still images)................p. 34

Frame rate

(movies) ......................p. 34

17

Volume

*1

.......................p. 41

*1

Available in the FE-5050 only.

1010

12:30’10/10/26’10/10/26 12:30

4/30

1 65432

15

Still image Movie

00:12/00:3400:12/00:34

1

7

4 6

Detailed display●

1010

4/304/30

1/1000 F2.8 2.0

AUTO

WB

AUTO

ISO

P

N

ORM

14

M

FILE

100 0004

’10/10/26 12:30

1/1000 F2.8 2.0

AUTO

WB

AUTO

ISO

P

N

ORM

14M

FILE

100 0004

’10/10/26 12:30

1 6 87 9 11105432

12

13

14

15

16

12

EN

Preparing the Camera

Inserting the battery and the SD/SDHC

memory card (sold separately)

Always use SD/SDHC memory cards with this

camera. Do not insert any other types of memory

card.

1

2

11

FE-5050 FE-4050

Battery/card compartment cover

2

Write-protect switch

Battery lock knob

Insert the battery by putting in the ▼ marked side

ﬁ rst, with the C marks toward the battery lock knob.

Damage to the battery exterior (scratches, etc.) may

produce heat or an explosion.

Insert the battery while sliding the battery lock knob in

the direction of the arrow.

Slide the battery lock knob in the direction of the

arrow to unlock, and then remove the battery.

Turn off the camera before opening the battery/card

compartment cover.

When using the camera, be sure to close the battery/

card compartment cover.

Insert the card straight until it clicks into place.

Do not touch the contact area directly.

3

2

11

2

FE-5050 FE-4050

This camera allows the user to take pictures using the

internal memory even when no SD/SDHC memory

card (sold separately) is inserted.

“Using an SD/SDHC memory card” (p. 59)

“Number of storable pictures (still images)/Continuous

recording length (movies) in the internal memory and

SD/SDHC memory cards” (p. 61)

13

EN

To remove the SD/SDHC memory card

12

Press the card in until it clicks and comes out slightly,

then grab the card and pull it out.

Charging the battery and setting up

using the supplied CD

Connect the camera to the computer to charge the battery

and use the supplied CD for setup.

User registration using the supplied CD and

installation of ib computer software is available on

Windows computers only.

The camera battery can be charged while the camera is

connected to a computer.

The indicator lamp lights during charging and turns

off when charging is complete.

Charging takes up to 3 hours.

If the indicator lamp does not light, the camera is not

correctly connected or the battery, camera, computer,

or USB cable may not be functioning as expected.

We recommend that you use a computer equipped

with Windows XP (Service Pack 2 or later), Windows

Vista, or Windows 7. See “Charging the battery with

the supplied USB-AC adapter” (p. 15) if you are using

a different computer or wish to charge the battery

without using a computer.

●

Windows

1

Insert the supplied CD in a CD-ROM drive.

Windows XP

A “Setup” dialog will be displayed.

Windows Vista/Windows 7

An Autorun dialog will be displayed. Click

“OLYMPUS Setup” to display the “Setup” dialog.

If the “Setup” dialog is not displayed, select “My

Computer” (Windows XP) or “Computer” (Windows

Vista/Windows 7) from the start menu. Double-click

the CD-ROM (OLYMPUS Setup) icon to open the

“OLYMPUS Setup” window and then double-click

“SETUP.EXE”.

If a “User Account Control” dialog is displayed, click

“Yes” or “Continue”.

2

Follow the on-screen instructions on your

computer.

If nothing is displayed on the camera screen even

after connecting the camera to the computer, the

battery may be exhausted. Leave the camera

connected to the computer until the battery has

charged, then disconnect and reconnect the camera.

●

14

EN

Connecting the camera

FE-5050 FE-4050

Multi-connector

USB cable (supplied)

Computer (on and running)

Indicator lamp

When the camera is connected to another device via

USB, a message will be displayed prompting you to

choose a connection type. Select [STORAGE].

3

Register your Olympus product.

Click the “Registration” button and follow the on-

screen instructions.

4

Install OLYMPUS Viewer 2 and ib computer

software.

Check the system requirements before beginning

installation.

Click the “OLYMPUS Viewer 2” or “ib” button and

follow the on-screen instructions to install the

software.

●

OLYMPUS Viewer 2

Operating

System

Windows XP (Service Pack 2 or later) /

Windows Vista / Windows 7

Processor Pentium 4 1.3 GHz or better

RAM

1 GB or more (2 GB or more

recommended)

Free Hard

Drive Space

1 GB or more

Monitor

Settings

1024 × 768 pixels or more

Minimum 65,536 colors

(16,770,000 colors recommended)

ib

Operating

System

Windows XP (Service Pack 2 or later) /

Windows Vista / Windows 7

Processor

Pentium 4 1.3 GHz or better

(Pentium D 3.0 GHz or better required

for movies)

RAM

512 MB or more (1 GB or more

recommended)

(1 GB or more required for movies — 2 GB

or more recommended)

Free Hard

Drive Space

1 GB or more

Monitor

Settings

1024 × 768 pixels or more

Minimum 65,536 colors (16,770,000

colors recommended)

Graphics

A minimum of 64 MB video RAM with

DirectX 9 or later.

* See online help for information on using the software.

5

Install the camera manual.

Click the “Camera Instruction Manual” button and

follow the on-screen instructions.

●

15

EN

Macintosh

1

Insert the supplied CD in a CD-ROM drive.

Double-click the CD (OLYMPUS Setup) icon on

the desktop.

Double-click the “Setup” icon to display the “Setup”

dialog.

●

2

Install OLYMPUS Viewer 2.

Check the system requirements before beginning

installation.

Click the “OLYMPUS Viewer 2” button and follow

the on-screen instructions to install the software.

OLYMPUS Viewer 2

Operating

System

Mac OS X v10.4.11–v10.6

Processor Intel Core Solo/Duo 1.5 GHz or better

RAM

1 GB or more (2 GB or more

recommended)

Free Hard

Drive Space

1 GB or more

Monitor

Settings

1024 × 768 pixels or more

Minimum 32,000 colors (16,770,000

colors recommended)

* Other languages can be selected from the language

combo box. For information on using the software, see

online help.

3

Copy the camera manual.

Click the “Camera Instruction Manual” button to

open the folder containing the camera manuals.

Copy the manual for your language to the

computer.

Charging the battery with the supplied

USB-AC adapter

The included F-2AC USB-AC adapter (with an AC

cable or plug-in type; hereafter referred to as USB-AC

adapter) differs depending on the region where you

purchased the camera. If you received a plug-in type

USB-AC adapter, plug it directly into an AC outlet.

●

16

EN

The included USB-AC adapter has been designed to

be used only for charging. Make sure that operations

such as shooting, viewing images and so on are not

being used while the USB-AC adapter is connected

to the camera.

Example: USB-AC adapter with an AC

cable

1

2

3

1

AC outlet

USB cable (supplied)

Multi-connector

When the camera is connected to another device via

USB, a message will be displayed prompting you to

choose a connection type. Select [CHARGE].

2

Indicator lamp

On: Charging

Off: Charged

FE-4050FE-5050

The battery is not fully charged at the time of

purchase. Before use, be sure to charge the battery

until the indicator lamp turns off (up to 3 hours).

If the indicator lamp does not light, the camera is not

correctly connected or the battery, camera, or USB-

AC adapter may not be functioning as expected.

For details on the battery and the USB-AC adapter,

see “The battery and USB-AC adapter” (p. 58).

The battery can be charged while the camera is

connected to the computer. Charging time varies

depending on the performance of a computer. (There

may be cases in which it takes approx. 10 hours.)

When to charge the batteries

Charge the battery when the error message shown below

appears.

Monitor top left Error message

Flashes in red

44

BATTERY EMPTY

17

EN

Operation guide

Operation guides displayed at the bottom of the screen

indicate that the m button, H button, or zoom buttons

should be used.

MENU

OK

SEL. IMAGE

ERASE/CANCEL

Operation guide

OK

SET

1

2

MENU

OK

SETEXIT

DIGITAL ZOOM OFF

AF MODE FACE/iESP

DATE STAMP

ICON GUIDE ON

OFF

RESET

COMPRESSION NORMAL

Date, time, time zone, and language

The date and time set here are saved to image ﬁ le names,

date prints, and other data. You can also choose the

language for the menus and messages displayed in the

monitor.

1

Press the n button to turn on the

camera.

The date and time setting screen is displayed when

the date and time are not set.

X

-- -- -- --

:..

Y/M/D

MENU

Y M D TIME

CANCEL

--------

Date and time setting screen

2

Use FG to select the year for [Y].

X

:..

Y/M/D

MENU

Y M D TIME

CANCEL

20102010

-- -- -- --

●

18

EN

3

Press I to save the setting for [Y].

:..2010

X

Y/M/D

MENU

Y M D TIME

CANCEL

-- -- ------

4

As in Steps 2 and 3, use FGHI and the

H button to set [M] (month), [D] (day), [TIME]

(hours and minutes), and [Y/M/D] (date order).

For a more accurate setting, press the H button

when the time signal hits 00 seconds while setting the

minutes.

To change the date and time, adjust the setting from

the menu. [X] (Date/time) (p. 44)

5

Use HI to select your home time zone and

press the H button.

Use FG to turn daylight saving time ([SUMMER])

on or off.

’10.10.26.12:30

SUMMER

OK

SET

Seoul

Tokyo

Seoul

Tokyo

The menus can be used to change the selected time

zone. [WORLD TIME] (p. 45)

6

Use FGHI to select your language and

press the H button.

●

19

EN

Shooting, Viewing, and Erasing

Shooting with the optimum aperture

value and shutter speed

[PROGRAM AUTO]

In this mode, automatic shooting settings are activated

while also allowing changes to a wide range of

other shooting menu functions, such as exposure

compensation, white balance, etc. as needed.

1

Press the n button to turn on the

camera.

[PROGRAM AUTO] indicator

44

PP

0.00.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

14

M

##

Number of storable still pictures (p. 61)

Monitor (standby mode screen)

If the [PROGRAM AUTO] indicator is not displayed,

press the H button to display the function menu and

then set the shooting mode to P.

“Using the Menu” (p. 4)

Current shooting mode display

44

PP

0.00.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

14

M

PROGRAM AUTOPROGRAM AUTO

Press the n button again to turn off the camera.

2

Hold the camera and compose the shot.

Horizontal grip

Vertical grip

Monitor

When holding the camera, take care not to cover the

ﬂ ash with your ﬁ ngers, etc.

20

EN

3

Press the shutter button halfway down to

focus on the subject.

When the camera focuses on the subject, the

exposure is locked (shutter speed and aperture

value are displayed), and the AF target mark

changes to green.

The camera was unable to focus if the AF target

mark ﬂ ashes red. Try focusing again.

PP

1/4001/400 F2.8F2.8

AF target mark

Press halfway

Shutter speed Aperture value

“Focusing” (p. 55)

4

To take the picture, gently press the shutter

button all the way down while being careful

not to shake the camera.

PP

1/4001/400 F2.8F2.8

Image review screen

Press fully

To view images during shooting

Pressing the q button enables playback of images. To

return to shooting, either press the q button or press the

shutter button halfway down.

●

Shooting movies [MOVIE]

1

Press the H button to display the function

menu screen.

44

0.00.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

14

M

PP

PROGRAM AUTOPROGRAM AUTO

2

Use HI to set the shooting mode to A and

then press the H button.

[MOVIE] indicator

0:340:34

0.00.0

AUTO

WB

AUTO

WB

VGA

##

Page is loading ...

Olympus FE-5050 User manual

This manual is also suitable for

Olympus FE-5050 User manual

Related papers

Other documents