Oricom BT9500 User manual

Brand: Oricom

Model: BT9500

Category: Telephones

Type: User manual

This manual is also suitable for

DECT BT9500

USER MANUAL

Keep this user guide for future reference.

BT9500

Digital Cordless Telephone equipped with Bluetooth

wireless technology

1Contents

Contents

Getting started ...............................................2

Getting to know your phone ...........................6

Introducing Bluetooth

wireless technology .12

Calls ............................................................16

Intercom .....................................................20

Phonebook ..................................................22

Caller ID .......................................................24

Redial list .....................................................26

Personal settings .........................................27

Registration .................................................31

Using your answering machine ...................32

Troubleshooting ...........................................37

Warranty Information (Australia) ...................40

Important

• Avoidexposureofthistelephonetomoistureorliquid.

• Topreventelectricshock,donotopenthehandsetorbasecabinet.

• Avoidmetalliccontact(e.g.metalclips,keys)betweenthe

battery contacts and charging conductors.

• Thereisaslightchancethatthetelephonecouldbedamagedby

an electrical storm. It is recommended that users unplug the phone

from the mains supply and telephone socket during a storm.

• Donotusethehandsetinanexplosivehazardareasuchas

where there is gas leaking.

• Followthelocalregulationsregardingthedisposalofyour

packing materials, exhausted batteries and used phone.

Whereverpossible,recyclethosematerials.

• Thisphoneshouldnotbeusednearintensivecaremedical

equipment.Personswithpacemakersshouldconsulttheir

Doctor or cardiologist before using this phone.

• Cleanwithadry,soft,lint-freecloth.Neverusecleaningagents,

particularlyaggressivesolvents.

• Becausethephoneworksbysendingradiosignalsbetween

base station and handset, wearers of hearing aids may

experience interference in the form of a humming noise.

• Yourphonecaninterferewithelectricalequipmentsuchas

answering machines, TV and radio sets, clock radios and

computers if placed too close. It is recommended that you

position the base unit at least one metre from such appliances.

• Thistelephonecomplieswithapplicablesafetyrequirementsfor

exposuretoradiowaves(EMR).Themeanpowerofthistelephone

doesnotexceed20mWlimitatwhichpointtestingisrequired.

• Privacyofcommunicationsmaynotbeensuredwhenusing

this telephone.

• Theearpieceofthehandsetmayattractsmallmetalobjects

such as staples and pins. Care should be taken when placing

the handset near these items.

• Thistelephoneisnotdesignedformakingemergency

telephonecallswhenthemainspowerfails.Alwayshavea

cordedphoneavailabletobeabletomakeandreceivecallsto

emergencyservicesifthemainspowerfails.

• Donotuseyourtelephoneduringanelectricalstorm

thunderstorm as it is possible to get an electric shock. Refer to

information contained in White pages directory.

•

This phone is designed for connection to a PSTN telephone line or an

analogueextensionportofaPBXsystem.Ifyouconnectthisdevice

to a digital extension of a PBX, damage may result to the PBX.

CAUTION

Use only the mains adaptors supplied with this product. Incorrect adaptor

polarity or voltage can seriously damage the unit.

Adaptor for base unit and charger:

Base Unit power supply – Input: 100-240VAC 50Hz 150mA

Output: 6 VDC 450mA

Ext Charger power supply – Input 100-240VAC 50Hz 100mA MAX

Output: 6 VDC 300mA

GettinG started

3GettinG started

Location

YouneedtoplaceyourBT9500basewithin2metresofthemains

power socket and telephone socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical

appliancestoavoidinterference.Yourunitworksbysendingradio

signals between the handset and base. The strength of the signal

depends on where you site the base. Putting it as high as possible

ensures the best signal.

Handset range

The BT9500 has a range of 300 metres outdoors when there is a

clear line of sight between the base and handset. Any obstruction

between the base and handset will reduce the range. With the

base indoors and handset either indoors or outdoors, the range will

normallybeupto50metres.Thickconcretewallscanseverely

affect the range.

Connect the Base Station

1) Plug the power supply and the line cord into the base station.

2) Plug the mains adapter & line cord into the wall socket.

3) Alwaysusethecablesprovidedinthebox.

Signal strength

The

HANDSET 1

06/09 13:35

icon on your handset indicates when you are in range.

When out of range of the base, the screen shows SEARCHING the

HANDSET 1

06/09 13:35

iconashesandthehandsetgivesanout-of-rangewarning

toneeveryminute.Thistoneisrepeateduntilyoumovebackinto

range.

NOTE:

The base unit needs mains power for normal operation, not just for charging

the handset batteries.

Do not install close to another telephone or other electrical equipment - this

can cause interference.

Install and Charge the Batteries

1) Slidethebatterycompartmentcoveroffthebackofthe

handset.

2) Insert the rechargeable battery pack as shown with the battery

plugged into the small socket in the battery compartment.

3) Slidethebatterycompartmentcoverbackonthehandset.

4) Put the handset on the base and charge the battery for 15

hours before using for the rst time. A beep indicates that the

handset is properly placed on the base or charger. Use only the

NiMHrechargeablebatteriesprovided.

Battery low warning

If the icon ashes in the display, you will need to recharge the

handset before you can use it again. During charging, the

icon in

the display will scroll.

Battery performance

Inidealconditions,fullychargedbatteriesshouldgiveabout10

hours talk time or 100 hours standby time on a single charge.

Notethatnewbatteriesdonotreachfullcapacityuntiltheyhave

beeninnormaluseforseveraldays.

The charge capacity of rechargeable batteries will reduce with

timeastheywearout,givingthehandsetlesstalk/standbytime.

Eventuallytheywillneedtobereplaced.

Batteries and handset may become warm during charging. This is

normal.

Tip!

It is good practice to put the cordless handset on the charging cradle when it is

not in use to ensure that the handset is always fully charged.

WARNING

DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS THERE IS

A RISK OF EXPLOSION AND/OR INJURY. ONLY USE THE Ni-MH RECHARGEABLE

BATTERY PACK AS SPECIFIED IN THIS USER GUIDE. CONTACT ORICOM FOR

REPLACEMENT BATTERY PACK.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

Never use non-rechargeable batteries. Use recommended type supplied with

this product.

• Neverusealkalineorlithiumbatteries.

• Donotdisposeofthebatteriesinare,astheycanexplode.

• Donotopenormutilatethebattery.Releasedelectrolyteiscorrosiveand

cancausedamagetotheeyesorskin.Itcanbetoxicifswallowed.

GettinG started

• Avoidcontactwithmetalobjectswhenhandlingthebattery.Theseobjects

could short out the batteries or cause the conductor to overheat resulting

in burns.

• Donotattempttorechargethebatterycellbyheatingit.Suddenreleaseof

batteryelectrolytecancauseburnsorirritationtotheeyesorskin.

• Observetheproperpolarity,ordirection,ofanybattery.Reverseinsertion

ofthebatterycellcanresultinleakageorexplosion.

• Removethebatteriesifyoudonotplantousetheproductforseveral

months at a time.

• Followthelocalregulationsregardingthedisposalofyourpacking

materials, exhausted batteries and used phone. Wherever possible, recycle

those materials.Packcontents

Dependingonthemodelyouhavepurchasedthispackshould

contain the following items:

If any of these are missing, please contact Oricom directly.

Twin Triple

Base unit 1 1

Cordless handsets 2 3

Charging cradle 1 2

Power adaptors 2 3

Line cord 1 1

User guide 1 1

Handset Rechargeable Ni-MH Battery

Pack 2.4V 500mAh

2 3

Purchasing additional handsets

YoumayexpandyourBT9500byaddingmorehandsets(BT9550).

These can be purchased separately from the retailer where you

purchased the product, or directly from Oricom (Australia)

www.oricom.com.au. The BT9500 can accommodate a total of 6

cordless handsets.

Important:

DO YOU HAVE BROADBAND/ADSL?

If you connect your telephone to a line with a broadband/ADSL connection,

youwillneedtoinsertamicrolter(notincluded)betweenthetelephoneand

the telephone line, otherwise you may get interference between the telephone

andthebroadband,whichcouldcausebackgroundnoiseonyourphoneand

or your Broadband may suffer dropouts.

Inahomewithbroadband,everytelephonesocketmusthaveamicrolter

connected, not just the one at the telephone point that your modem is

connectedto.Ifyouneedmorebroadbandmicrolters,thesecanbeusually

purchased from the retailer where you bought this phone from.

GettinG started

Handset Overview

1 Earpiece

2 Scroll up/ Volume up/ Phonebook

In idle mode: press to access the phonebook.

In menu or list mode: press to scroll up.

Ineditingmode:presstomovethecursortotheright.

Duringacall:presstoincreasevolume.

3 INT Intercom

Pressforintercom/transfer(multi-handsetonly)

4 Redial

Inidlemode:presstoviewtherediallist.

Inediting/pre-dialmode:pressandholdRedialkeytoinserta

dialling pause.

5 Talk on/ Recall(R)

Press to make or answer a call.

During a call or phonebook editing: press to send a Recall.

6 Menu/OK

Presstoaccessthemainmenutoconrmandsavesettings,

or access sub-menu-lists.

7 Clear/ Mute

Inpre-dial/editingmode:presstodeleteonecharacter/digit.

During incoming ringing: press to mute the handset ringer.

Duringacall:presstomute/unmutethemicrophone.

Incalllist/phonebook/rediallistentry:presstodeletetheentry.

GettinG to know your phone

7GettinG to know your phone

8 Scroll down/ Volume down/ Call List

In idle mode: press to access the call list.

In menu or list mode: press to scroll down.

Ineditingmode:presstomovethecursortotheleft.

Duringacall:presstodecreasevolume.

9 Talk off/ Clear/ Back

Inidlemode:pressandholdtopoweron/offthehandset.

Inmenumode:presstoexittopreviouslevel.

In pre-dial mode: press to delete last digit.

Inphonebook/calllist/rediallistentry:presstoexittoidle.

During incoming ringing: press to mute the handset ringer.

During a call: press to end a call.

Inidlemode:pressandholdtolock/unlockthekeypad.

Whenviewingphonebook,presstoviewpreviousdigitsfor

long numbers.

Inidlemode:pressandholdtoturnon/offthehandsetringer.

Duringphonebooknameentry/editing,presstoswitchbetween

upper and lower case.

Whenviewingphonebook,presstoseemoredigitsforlong

numbers.

12 Speaker

Presstoturnon/offthespeakerphone.

InCallList/phonebook/rediallist:presstomakeacalltothe

selected entry with speakerphone.

13 MOBILE

Press to make or answer a mobile call.

14 Microphone

Base Station Overview

Vol

1 BLUETOOTH LEDs

Steady ON: Bluetoothdeviceispairedtothebase.

Flashes: Bluetoothdeviceisinpairingset-upmode.

Off: If Bluetoothdeviceisdisconnected.

2 IN USE LED

Flashes when there is an incoming call, or a cordless handset

is using the line.

Steady on when the answering machine is on line.

3 CHARGING LED

On: when the handset is put into base cradle for charging.

4 PAGE

Press to page all registered handsets.

5 CHARGING CRADLE

6 BLUETOOTH KEYS

In Idle, to pair up Bluetooth mobile:

press and hold until “bt” ashes on the display, then release

“C1” or “C2” ashes depending on the key pressed.

In idle, to pair up Bluetooth headset: Press and hold for more

than 5 sec, until the ashing “bt” changes to a ashing “H1” or

“H2”, depending on the key pressed.

7 DELETE

During message playback: press to delete the current

message.

 Inidle:presstwicetodeleteallpreviouslyreviewedmessages.

GettinG to know your phone

8 SKIP BACKWARD

Press to repeat playing the current message.

 Presstwicetoplaybackthepreviousmessage.

9 VOLUME –

During message playback: press to decrease the speaker

volume.

Inidle:presstodecreasethebaseringervolume.

10 SKIP FORWARD

During message playback: press to skip to the next message.

11 VOLUME +

During message playback: press to increase the speaker

volume.

 Inidle:presstoincreasethebaseringervolume.

12 PLAY/ STOP

Press to playback or stop playing messages.

13 ANSWER ON/OFF

 Presstoswitchtheansweringmachineon/off.

Handset LCD Display

Following icons will be displayed according to the current status of

the phone operation.

Icons

Description

On when answering machine is turned on.

On when new answering machine message is

received.

On when speaker phone is in use.

On when handset ringer is turned off.

On when microphone is muted during a call.

On when the Home line is in use.

On when a Bluetooth device is connected with

the telephone base.

On when Bluetooth headset is in use.

On when the Mobile line is in use.

GettinG to know your phone

On when you have a new Voice Mail message.

(This is a caller display service and is not usually

available from UK network providers.)

On when viewing a new call entry in the call log.

On steadily when Bluetooth device #1 or #2 is

connected with the telephone base.

Full battery power level.

2/3 battery power level.

1/3 battery power level.

Flashes when low battery power level is detected,

needs charging.

Animation in cycle. Battery is charging.

Message counter display

Display Description

0F-> --

Displayed briey when the answering machine

(TAM) is turned OFF.

When answering machine is OFF and no new

TAM messages recorded.

0n-> XX

Displayed briey when the answering machine

(TAM) is turned ON.

00 Steady ON: No voice messages in the TAM.

Flashing: There are XX new messages recorded

where XX is from 01 to 59.

Steady ON: There are ZZ old messages in the

TAM memory and no new messages.

XX/FF

Flashing XX alternately with FF: There are XX new

messages recorded and the TAM memory is full.

Flashing : The TAM memory is full and there are

no new messages.

- - /XX

Flashing XX alternately with - -: the Time/date

is not set and there are XX new voice messages

recorded.

GettinG to know your phone

- -

Flashing - -: the Time/date is not set and there

are no new voice messages recorded.

Steady ON: Playing the current XX incoming

message.

A1/A2

Steady ON: Playing the current outgoing

message (OGM)

where A1 is the Answer & Record OGM and A2 is

the Answer Only OGM.

XX/An

Flashing XX alternately with An: Currently

recording the XX new incoming message.

Flashing: Remote access is in progress from a

handset or via the external line.

bt Flashing: entering Bluetooth pairing mode.

C1/C2 Flashing: in Bluetooth mobile pairing mode.

H1/H2 Flashing: in Bluetooth headset pairing mode.

GettinG to know your phone

Introducing Bluetooth

wireless technology

YournewtelephonesystemwithBluetooth wireless technology has

the following features:

• UptotwoBluetoothdevicescanbepairedwiththetelephone

base, and they can be two Bluetooth enabled mobile phones or

one mobile phone plus one headset.

• ConnectamobilephonetomakeandreceiveMOBILEcalls,

orconnectaheadsettoreceiveMOBILEcalls.Twomobile

phones can be paired but only one paired mobile phone can be

connected on a call at a time.

• Makeandreceivecallsusingyourmobilephoneplanwhile

beneting from the ease and comfort of your home telephone

system.

Glossary of terms

Below are some terms used in this user’s guide to help you become

familiar with using your Bluetoothdevicesandyournewtelephone

system.

Bluetooth mobile phone - Refers to a Bluetooth enabled

mobile telephone.

MOBILE line-Thecommunicationsserviceprovidedthroughyour

Bluetooth enabled mobile telephone.

HOME line-Yourconventionaltelephonelandline.

Connected - A Bluetoothdevicecanonlybeusedwhenitis

connected to the telephone base.

Paired Devices - Once a Bluetoothdevicehasbeenpairedwiththe

telephone base, it will be identied as registered to the telephone

base.

Pairing - This refers to the process of two Bluetoothdevices

registeringdeviceinformationwitheachother.Thetelephonebase

must be paired with a Bluetooth enabled mobile phone before the

Bluetoothdevicecanbeused.

Depending on the manufacturer, this may also be referred to as

Bonding.

PIN - By default, the PIN is 0000 for the base and for most

Bluetoothdevices.PINinformationmustbeexchangedbetween

Bluetoothdevicesbeforetheycanbeused.Thisisalsoknownasa

passkey or passcode.

IMPORTANT INFORMATION

• Refertoyourmobilephoneuser’sguideformoreinformation

about its Bluetooth function.

• MakesurethatyourBluetooth enabled mobile phone is

between one to 33 feet away from the telephone base in order

to maintain a clear and consistent connection between them.

introduCinG Bluetooth

• MakesurethatyourBluetooth enabled mobile phone has

sufcientsignalstrength.YoumayneedtomovetheBluetooth

enabled mobile phone and telephone base to a location where

the mobile signal may be stronger.

• ChargeyourBluetooth mobile phone while it is connected

to the telephone base because your mobile phone’s battery

will discharge faster while it is connected wirelessly to the

telephone base.

• Monitoryourmobilephone’susagebecauseairtimeis

deducted from your mobile plan for the duration of the MOBILE

calls.

Refer to the “Bluetooth setup” section to learn how to set up your

Bluetoothdevice.Refertothe“PairingaBluetooth enabled mobile

phone” section on how to operate your Bluetoothdeviceswithyour

new telephone system with Bluetooth wireless technology.

Bluetooth

setup

To use a Bluetooth enabled mobile phone with your telephone, you

must rst pair and connect your Bluetooth enabled mobile phone

with the telephone base.

Pairing a

Bluetooth

enabled mobile phone

Before you begin, make sure that your Bluetooth enabled mobile

phone is not connected to any other Bluetoothdevice.Refertoyour

Bluetooth enabled mobile phone user’s manual to learn how to

search for or add new Bluetoothdevices.

1. Press and hold either of the Bluetooth buttons on the telephone

base until the corresponding Bluetooth LED is ashing, and the

display LED on the base ashes “bt”, then release the button

and the display will ash “C1” or “C2” depending on which

buttonyouhavepressed.TheBluetoothfeatureisactivated.

2. Using your Bluetooth enabled mobile phone, turn on the

Bluetoothfeatureandsearchforanewdevice.

3. Once your Bluetooth enabled mobile phone has found the

BT9500 telephone base, called BT9500 in the Bluetooth list,

select it.

4. Using your Bluetooth enabled mobile phone, enter the PIN of

the telephone base (the default PIN is 0000) to continue the

pairing process.

Pairing a

Bluetooth

headset

1. Press and hold either of the Bluetooth buttons on the telephone

base until the corresponding Bluetooth LED is ashing, and

the display LED on the base changes from a ashing “bt” to

aashing“H1”or“H2”dependingonwhichbutttonyouhave

pressed.

2. Using your Bluetooth headset, turn on the Bluetooth feature

andsearchforanewdevice.

3. Follow the user’s guide of your Bluetooth headset to nish the

pairing process.

introduCinG Bluetooth

NOTE

Only Bluetooth headsets with password 0000 can be paired with the telephone

base system.

When a device is successfully connected, the Bluetooth LED for the button

selected will be turned on, and the Bluetooth status icon will display on the

handset screen. The number 1 and/or 2 will also be displayed next to Bluetooth

status icon to indicate the numbers of any Blue too th enab led devices

connected.

IfyouwouldliketopairanotherBluetoothdevice,pleaserepeatthesteps

above. Be sure to activate a Bluetooth button which is NOT paired to another

Bluetoothdevice(indicatedbytheBluetoothLEDlightonthebasebeingOFF).

If you activate a Bluetooth button which is already paired to another Bluetooth

device(indicatedbytheBluetoothLEDlightonthebasebeingON)thiswill

terminate the connection of the Bluetooth device that was attached and start

the process to connect a new Bluetooth device.

Auto connection

Onceyouhavepairedadevicewiththetelephonebase,thepairing

informationisstoredinthetelephonebase.Ifthepaireddevice

becomes disconnected, the telephone base will automatically

searchandre-connecttothatdevice.Iftheconnectiondoesnot

resumeinaminute,youwillneedtoreconnecttothatdevice

manually, refer to the section below for details.

Manual connection

Tomanuallyre-connectapaireddevice,makesuretheBluetooth

feature is turned on in your Bluetooth enabled mobile phone, select

BT9500fromthepaireddevicelistinyourBluetooth enabled

mobile phone. Once the connection is established again, the

corresponding Bluetooth LED for the button selected will turn back

on.

Turning off the auto connection

If you do not want the telephone base to re-connect to a paired

deviceautomaticallyafteritisdisconnected,youcanturnoffthe

auto connection feature manually. In order to turn off the auto

connection, you will need to initiate a disconnection from the paired

Bluetooth enabled mobile phone; this will transmit a signal to the

telephone base and disable the auto connection.

While the Bluetooth enabled mobile phone is connected to the

telephone base, nd the Bluetooth enabled mobile phone’s

BluetoothdevicelistandselectBT9500andmanuallydisconnect

thedevice.

(If disconnection is not an option on your Bluetooth enabled mobile

phone, you may need to disable Bluetooth or unpair the telephone

base.) Refer to your Bluetooth enabled mobile phone’s user’s

guide for instructions. The telephone base will not search and

re-connect to this Bluetooth enabled mobile phone until this feature

isactivatedagain.

introduCinG Bluetooth

NOTE

If the connection between the paired device and the telephone base does not

resume by manually connecting the device on the paired device list, you will

need to unpair or de-register the device from the Bluetooth enabled mobile

phone.Makesurethedeviceisnolongeronthepairedlistafterderegistration;

then follow the steps in section “Pairing a Bluetooth enabled mobile phone” or

“Pairing a Bluetooth headset” as above to start the pairing procedures again.

Replace a paired device

Ifyouwanttopairandconnectanewdevicewhenthereare

alreadytwodevicespairedwiththetelephonebase,press

and hold the Bluetooth button (which you want to terminate

the corresponding connection) on the telephone base until the

corresponding BluetoothLEDisashing,theconnectionviathis

Bluetooth button will be terminated automatically, then start with

step two of section “Pairing a Bluetooth enabled mobile phone”

or “Pairing a Bluetoothheadset”.Ifyoudonotpairanewdevice

within two minutes, the Bluetooth LED ashes on the telephone

base will turn off and the system will return to idle mode.

introduCinG Bluetooth

Calls

Make a HOME call

• PressTALK/RorSPEAKER,andthenenterthetelephone

number.

Predial a call

• Enterthetelephonenumber.PressMUTE/CLEARorTALKOFF/

BACKtomakecorrectionswhenenteringthephonenumber.

• PressTALK/RorSPEAKERtodial.

Answer a HOME call

• PressTALK/RorSPEAKER.

NOTES

Thescreenshowstheelapsedtimeasyoutalk(inhours,minutesand

seconds).

Whenpredialing(previewnumbersbeforedialling),pressMUTE/CLEARorTALK

OFF/BACKtobackspaceanddelete;pressandholdoinsertadiallingpause

(apappears).

End a HOME call

• PressTALKOFF/BACKorputthehandsetinthetelephonebase

or charger.

Make a MOBILE call

1. Enter the telephone number, and then press MOBILE.

2. PressMUTE/CLEARtomakecorrectionswhenenteringthe

phone number.

If there is only one Bluetooth enabled mobile phone paired up,

pressMENU/OKorMOBILEagaintodialout.Oriftherearetwo

Bluetoothenabledmobilephonespairedup,pressUP/DOWNto

selectthedesiredone,andthenpressMENU/OKorMOBILEtodial

out.

1. Press MOBILE. If there is only one Bluetooth enabled mobile

phonepairedup,pressMENU/OKorMOBILEagaintoenterdial

mode.

Or if there are two Bluetooth enabled mobile phones paired

up,pressUP/DOWNtoselectthedesiredone,andthenpress

MENU/OKorMOBILEtodialout.

2. Enterthetelephonenumber.PressMUTE/CLEARtomake

corrections when entering the phone number.

3. PressMENU/OKorMOBILEtodialout.

Calls

NOTES

1. Some Bluetooth enabled mobile phones may have a default setting that

disablesthefeatureofmakingacallthroughtheBluetoothconnection.

MakesurethissettingisenabledbeforemakingaMOBILEcall.

2. You may hear interference if your Bluetooth enabled mobile phone is too

closetothetelephonebaseduringaMOBILEcall.Makesurethatyour

Bluetoothenabledmobilephoneisbetween0.5meter(onefoot)to10

meters(33feet)awayfromthetelephonebaseinordertomaintainareliable

connection between them.

Answer a MOBILE call

• PressMOBILEorSPEAKER.

End a MOBILE call

• PressTALKOFF/BACKorreturnthehandsettothetelephone

base or charger.

Handset speakerphone

Duringacall,youcanpressSPEAKERtoalternatebetweenhands-

free speakerphone and normal handset use.

Call from the redial list

Theredialliststoresthelastvediallednumbers(upto30digits

each) .

• PressREDIALtodisplaythemostrecentlycallednumber.Press

UP or DOWN to scroll to the number you want to redial.

• PressTALK/orSPEAKERtodialthedisplayednumberfromthe

HOME line.

• PressMOBILEtwicetodialthedisplayednumberfromthe

MOBILE line.

Call from the phonebook

PressUP/PHONEBOOKtoaccessthephonebookfromidlemode,

and press UP or DOWN to scroll the number you want to dial.

• PressTALK/RorSPEAKERtodialthedisplayednumberfrom

the HOME line.

• PressMOBILEtwicetodialthedisplayednumberfromthe

MOBILE line.

Call from the call list

PressDOWN/CIDtoaccessthecalllistfromidlemode,andpress

UP or DOWN to scroll to the number you want to dial.

• PressTALK/RorSPEAKERtodialthedisplayednumberfrom

the HOME line.

• PressMOBILEtwicetodialthedisplayednumberfromthe

MOBILE line.

Calls

Volume control

PressUP/DOWNtoadjustthelisteningvolumewhenonacall.

Eachpressofthebuttonincreasesordecreasesthevolumelevel

by one step.

NOTES

1.Allvolumesettings(handsetandspeakerphone)areindependent.

2. When the volume reaches the minimum or maximum setting, you will hear

two beeps.

Mute

The mute function allows you to turn off the microphone, so you

can hear the caller, but the caller will not be able to hear you.

To mute a call:

• PressMUTE/CLEARtoturnoffthemicrophone.Whenmuteis

on, the handset screen will show MUTED for a few seconds

and the MUTE icon will be shown.

To un-mute a call:

• PressMUTE/CLEARagainandresumespeaking.Whenmute

is turned off, MICROPHONE ON will display temporarily on the

handset screen.

Receive a HOME call while on a MOBILE call

If you are on a MOBILE call and there is an incoming HOME call,

you will hear a short beep.

To answer the incoming HOME call:

• PressTALK/Ronthehandset.TheMOBILElinecallwill

automatically be placed on hold, and CELL LINE HELD will

appear on the display.

To end the HOME call:

• PressTALKOFF/BACKonthehandset,andENDEDwilldisplay

for 5 seconds. The MOBILE line will still be on hold. CELL LINE

HELD will appear on the display.

To resume the MOBILE call on hold:

• PressMOBILEonthehandset.

NOTE

If the answering system is on and you do not answer an incoming HOME call

while on the MOBILE line, the incoming HOME line call will be answered by the

answering system.

Temporary ringer silencing

PressTALKOFF/BACKorMUTE/CLEARwhilethetelephoneis

ringing to silence the ringer temporarily. This will silence the ringer

without disconnecting the call. The next incoming call will ring

normallyatthepresetvolume.

NOTE

Each handset will ring when there is an incoming call unless the ringer volume

is turned off. Pressing TALK OFF/BACK or MUTE/CLEAR on one handset will

only silence the ringer of that particular handset.

Calls

Page is loading ...

Oricom BT9500 User manual

Brand: Oricom

Model: BT9500

Category: Telephones

Type: User manual

This manual is also suitable for

DECT BT9500

Download PDF

report

Oricom BT9500 User manual

This manual is also suitable for

Oricom BT9500 User manual

Related papers

Other documents