Lightolier C6P38D is an incandescent open downlight that comes with various features, such as a 16-gauge aluminum reflector, 50° visual cutoff to lamp and lamp image, and a removable reflector for bottom relamping. The lampholder assembly is easy to install and provides friction spring clips to secure the aperture cone. The socket harness has spring tension clips that snap into die-cast aluminum top at pre-focused positions, ensuring correct optical alignment. The C6P38D is compatible with various frame-in kits and can be used in non-IC and IC-AirSeal® installations.
Lightolier C6P38D is an incandescent open downlight that comes with various features, such as a 16-gauge aluminum reflector, 50° visual cutoff to lamp and lamp image, and a removable reflector for bottom relamping. The lampholder assembly is easy to install and provides friction spring clips to secure the aperture cone. The socket harness has spring tension clips that snap into die-cast aluminum top at pre-focused positions, ensuring correct optical alignment. The C6P38D is compatible with various frame-in kits and can be used in non-IC and IC-AirSeal® installations.
Lightolier C6P38D is an incandescent open downlight that comes with various features, such as a 16-gauge aluminum reflector, 50° visual cutoff to lamp and lamp image, and a removable reflector for bottom relamping. The lampholder assembly is easy to install and provides friction spring clips to secure the aperture cone. The socket harness has spring tension clips that snap into die-cast aluminum top at pre-focused positions, ensuring correct optical alignment. The C6P38D is compatible with various frame-in kits and can be used in non-IC and IC-AirSeal® installations.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI