Jet Tools GH-2280ZX User manual

Jet Tools
Brand
Jet Tools
Model
GH-2280ZX
Category
Lathes
Type
User manual

Jet Tools GH-2280ZX is a lathe with a 10HP motor and a 22" swing over bed. It is a versatile machine that can be used for a variety of turning applications, including metalworking, woodworking, and plastics.

The GH-2280ZX comes standard with a 10" 3-jaw chuck with top reversing jaws and a 12" 4-jaw chuck. It also has a 3-1/8" bore spindle supported by two tapered bearings and one ball bearing. This provides the machine with the rigidity and precision needed for heavy-duty cutting.

The universal gear box allows for inch, metric, diametral, and module pitch threads, without the need for change gears. This makes it easy to cut threads of all types and sizes.

Jet Tools GH-2280ZX is a lathe with a 10HP motor and a 22" swing over bed. It is a versatile machine that can be used for a variety of turning applications, including metalworking, woodworking, and plastics.

The GH-2280ZX comes standard with a 10" 3-jaw chuck with top reversing jaws and a 12" 4-jaw chuck. It also has a 3-1/8" bore spindle supported by two tapered bearings and one ball bearing. This provides the machine with the rigidity and precision needed for heavy-duty cutting.

The universal gear box allows for inch, metric, diametral, and module pitch threads, without the need for change gears. This makes it easy to cut threads of all types and sizes.

jettools.com
The JET
®
ZX Series Large Spindle Bore Lathe line-up has been expanded with the
introduction of the GH-2280ZX. This new 10HP ZX Series lathe boasts a 22" swing
over bed and comes standard with a 10" 3-jaw chuck with top reversing jaws and a
12" 4-jaw chuck. The 22" ZX Series Large Spindle Bore Lathe comes equipped with
a 3-1/8" bore spindle supported by two tapered bearings and one ball bearing and a
universal gear box with pitch threads in inches, metric, diametral and module. The
universal gear box is dial controlled eliminating the need for changing end gears. The
GH-2280ZX also comes standard with a follow rest and large capacity steady rest.
22" x 80" ZX Series
10HP Large Spindle Bore Lathe
STOCK NO. 900479
10M 09/06
©2006 WMH TOOL GROUP, Inc. All Rights Reserved.
jettools.com
22" x 80" ZX SERIES
10HP LARGE SPINDLE BORE LATHE
■ Uniquely designed exclusively by JET
■ ISO 9001 certified manufacturer
■ 3-1/8" bore spindle is supported by two tapered
and one ball bearing
■ Chrome molybdenum headstock gears are hardened,
ground, and shaved
■ Universal gear box allows inch, metric, diametral,
and module pitch threads, no change gears required
■ Carriage features one-shot lubrication and Turcite-B
on bed sliding surfaces
■ T-slotted compound slide featuring a four-way tool post
■ One-piece cast iron base absorbs vibration allowing heavier
cuts
■ High quality ANSI Class 50 wear-resistant cast iron
bed ways are hardened and ground
■ Removable gap allows up to 23-5/8" diameter work
on 16", 27-1/2" on 18"
■ Five position automatic carriage stop increases productivity
■ Attractive chrome control levers, dials, and knobs
■ Tolerance test certificate included
■ Also available with collet closer, taper attachments,
and digital readouts
22" x 80" ZX SERIES 10HP LARGE SPINDLE BORE LATHE
STOCK NUMBER 321980
Model
GH-2280ZX
Swing Over Bed (in.)
22
Swing Over Cross Slide (in.)
13
Swing Through Gap (in.)
29-1/2
Length of Gap (in.)
12-1/4
Distance Between Centers (in.)
80
Spindle Bore (in.)
3-1/8
Spindle Mount
D1-8
Spindle Taper (with sleeve)
MT-7(MT-5)
Number of Spindle Speeds
12
Range of Spindle Speeds (RPM)
25-1,800
Number of Longitudinal and Cross Feeds
122
Range of Longitudinal Feeds (in./rev.)
.0015 – .0913
Range of Cross Feeds (in./rev.)
.0006 – .0365
Number of Inch Threads
61
Range of Inch Threads
1-5/8 – 72
Number of Metric Threads
24
Range of Metric Threads (mm)
.05 – 20
Maximum Tool Size (in.)
1 x 1
Maximum Compound Slide Travel (in.)
5-1/8
Maximum Cross Slide Travel (in.)
10
Maximum Carriage Travel (in.)
75
Tailstock Spindle Travel (in.)
5
Tailstock Taper
MT-5
Follow Rest Capacity (in.)
1/2 - 3-1/2
Steady Rest Capacity (in.)
3/8 – 7
Width of Bed (in.)
13-3/8
Overall Dimensions (in./L x W x H)
136-1/8 x 40 x 48-7/8
Motor
10HP, 230/460V, 3Ph, Prewired 230V
Net Weight (lbs.)
7400
Heavy-Duty
One Piece
Cast Iron Base
Foot
Break
Steady Rest
Standard
Equipment
3-1/8"
Bore Spindle
Universal
Gear Box
  • Page 1 1
  • Page 2 2

Jet Tools GH-2280ZX User manual

Jet Tools
Brand
Jet Tools
Model
GH-2280ZX
Category
Lathes
Type
User manual

Jet Tools GH-2280ZX is a lathe with a 10HP motor and a 22" swing over bed. It is a versatile machine that can be used for a variety of turning applications, including metalworking, woodworking, and plastics.

The GH-2280ZX comes standard with a 10" 3-jaw chuck with top reversing jaws and a 12" 4-jaw chuck. It also has a 3-1/8" bore spindle supported by two tapered bearings and one ball bearing. This provides the machine with the rigidity and precision needed for heavy-duty cutting.

The universal gear box allows for inch, metric, diametral, and module pitch threads, without the need for change gears. This makes it easy to cut threads of all types and sizes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents